Bluesky single-phase gel polish how to apply and remove

Total information

We are all accustomed to the fact that applying gel polish is quite difficult. This is a long process that requires some skill and sufficient patience. In addition, in order to perform such a manicure, in addition to the actual varnish, you also need to purchase a top and base. As a result, even at home, such a manicure cannot be called cheap. And if you add in the cost of all the dehydrators, primers and other auxiliary products, the price becomes quite high.

It was with all these shortcomings in mind that manufacturers of manicure cosmetics developed a completely new type of coating - single-phase gel nail polish. The undoubted advantages that single-phase gel polish has include:

You no longer need to apply multiple layers of various varnishes. One product combines the positive properties of a base, top and fixative. Now several layers have to be applied just to achieve the desired color intensity;
There is a general rule for all gel polishes and shellacs - the fewer layers of coating applied, the more durable the manicure will be. According to this rule, a single-phase gel on nails will be more stable than a three-phase one. Although, this is not necessary, since after three weeks the gel still has to be removed due to the fact that the nail grows strongly and an unpainted crescent appears near the cuticle;
Now you spend much less money on material. Even though a single-phase gel polish is more expensive than a three-phase one, nevertheless, when adding up the cost of the base, top and color coating, the use of a single-phase gel turns out to be much more profitable;
In addition to saving money, you also save a lot of space. This is especially true for craftsmen who have a whole variety of varnishes and gels, who, at the same time, work at home. Now the gels will take up much less space;
Single-phase gel polish, unlike many other types of varnish, can be dried not only with ultraviolet, but also under an LED lamp;

There is no need to choose tops and foundations. It seems that there is nothing complicated in this process, but in fact it is not. Not all bases and top coats have the same quality and durability. Some even change color slightly. Moreover, the best solution is not always to use all coatings of one brand, and therefore you have to find out the most acceptable one by trial and error. Use Bluesky brand single-phase gel polish and you will no longer have to make a choice.

If the description of these advantages is not enough, then we can add that the Bluesky single-phase gel polish does not form a sticky layer that must be thoroughly washed.
In addition, the composition of Bluesky gel polishes is very good. They do not contain formaldehyde, alkali, toluene, etc. [yandex2] [google2]

What does single-phase gel polish mean?

Single-phase gel polish is an excellent find for those who do not want to buy many different jars with a base, color coating and fixer, because there is simply no need for this. The unique composition and structure of this gel polish ensures long-lasting wear and rich color, combining a base coat, base color and finish.

This type of gel polish has many advantages , including:

Relatively cheap , because by buying one such gel polish, you give up the finish and base, saving your money.
Speed of execution - after each layer you do not need to dry your nails in a lamp. By applying 1-2 layers and drying them, you save a lot of time.
It looks more neat due to its small layer thickness.
You can dry your nails not only in an ultraviolet lamp, but also in an LED lamp.

Application

From the description of what single-phase gel polish is, we can conclude how to apply it. The step-by-step process of applying Bluesky single-phase gel polish is described below.

Trim the excess length of the plate;
Push or cut the cuticle;
File the free edge of the nail, giving it a suitable shape;
Polish your nails with buffs; they should be smooth to reduce the number of possible peelings;
Degrease the plates with a special product before applying Bluesky gel polish;
Apply a primer for a better result, a tighter connection between the plate and the coating;
Apply a thin, even layer of gel polish to your nails. You need to apply it confidently so that your hands don’t tremble, even if this is your first time doing a gel manicure. If you have experience, then apply the polish to all your fingers at once, but if you don’t have experience, you can paint and dry one nail at a time in a lamp;

Dry Bluesky gel in a UV lamp for the time specified in the instructions for use of the gel. For a thin layer of coating this is 1 minute;
After the nails have dried, you will most likely realize that the color is not saturated enough. Simply apply a second coat and design on it if necessary, then cure again under the lamp for another 1 minute;
Even if the color saturation is still insufficient, a third coat should only be applied in exceptional cases. Most often, manicurists are guided by the fact that the more layers, the less stable the manicure. Also, do not immediately apply a thick layer of Bluesky gel. It may not dry completely, but only “grab” with the top layer and then smear. It may also shrink directly in the lamp.

When applying varnish, pay special attention to the end cuts of the free edge. They need to be sealed very carefully, since in the future, detachments will come from these areas. This is very difficult to do on short nails. Some artists place a sheet of paper or an extension form under the short tip of the nail, thus moving the nail away from the roller. On this paper the end is sealed and does not stain your hands. As an additional care, you should treat the cuticle with a special oil, which will slow down its growth and make it softer.

Differences between single-phase gel polish and three-phase

These two types of gel polish have a huge number of fans, but many still don’t know what the difference is between them, because the wear time of the varnishes is almost the same , the end result is also not much different - the coating has a rich pigment and shine that cannot show off regular nail polish.

So, the main difference between a single-phase varnish and a three-phase one is the combination of three main components in one bottle . Three-phase varnish uses a separate base, color coating and fixer. Due to this, the use of single-phase gel polish is much easier for home manicures and beginners.

Another difference is that single-phase gel can be dried in both an ultraviolet and LED lamp , while some gel polishes can only be dried in an LED lamp.

Wearing Features

Like any other varnish, Bluesky single-phase coating has its own characteristics. Following these simple rules can ensure a longer life for both the manicure and the coating itself in the bottle. The most pleasant quality of this varnish is that it can be applied immediately after removing the previous layer. It does no more harm to nails than simple gel or shellac, from which nails begin to deteriorate severely only after 3–4 uses in a row. Manufacturers claim that the Bluesky brand has presented single-phase gel polish as completely safe because it is characterized by a porous structure through which the nail supposedly breathes.

The general question of the harmlessness of this method remains questionable. As with any other color coating, Bluesky single-phase gel varnish contains aggressive coloring pigments. It is possible that if they get on the nail and are worn directly on the nail for a long time without a base, they can not only color it, but also ruin it. Moreover, the darker or brighter the varnish, the greater the likelihood of tinting the plate, which is then very difficult to get rid of. If you choose just such varnishes, then when preparing your nails, do not polish them so much, let the gloss remain on the nails. This way the plate is less likely to become stained.

Bluesky single-phase gel polish must be dried strictly following the instructions included with the polish. If you expose your nails to a lamp, the coating may become dull, cracked, or wrinkled. If there is not enough time for drying, the varnish will smear at the first pressure on the layer.

[yandex3] [google3]

Removal

Removal of Bluesky single-phase gel polish is carried out using a simple liquid for dissolving gel polish. It copes equally well with both single-phase and three-phase coatings. You can replace the special composition with simple nail polish remover with acetone. This happens as follows:

Apply the liquid to cotton pads;
If you have long nails and you want to remove this length, then cut them off first. Removing gel polish from long nails is inconvenient. The shorter the nails in this case, the more convenient;
Wrap the disks around your fingers so that the wetted part of the disk is directly on the nail;
Wrap your finger with foil or sealed film on top so that air gets to the compresses to a minimum;
Leave the compress on your nails for as long as indicated in the liquid instructions. Usually it is 5 – 10 minutes;
If nail polish remover with acetone is used, the compress exposure time increases to 15 - 20 minutes, and sometimes more;

After this time, remove the compress from one finger and scrape the coating with an orange stick. It should be soft and easy to clean. If not, then seal the nail back in the foil and wait a couple more minutes. After that, check again. So check until you achieve the desired result;
Now take an orange stick and gently, avoiding excessive pressure, remove the slurry from Bluesky gel polish from your nails. Be especially careful around the lunula area. Damage to it can result in the new nail growing back deformed and uneven.

In many ways, the process of removing the coating from nails turns out to be much more harmful and traumatic for them than wearing the gel itself. In addition, this method will not eliminate the coloring of the nail plate with the pigment of the varnish. Thus, after removing such a gel, you will have to paint your nails for quite a long time without breaks.

Step-by-step nail coating with Bluesky gel polish

If you are not yet familiar with the products of this brand, the following instructions will help you do everything right the first time.

Preparatory stage

1. Process the cuticle.

2. Remove the glossy layer. For better “adhesion” of the coating to the nail plate, you need to treat it with a polishing file or buff.

3. Give the final shape to the nail.

4. Degrease the surface. For this, a special dehydrator liquid is used.

Important! Do not touch the treated nail plate with your fingers.

Creating a Base Layer

1. Applying primer. This is a kind of primer. It must be used if the nail plate is very thin.

2. Apply the base gel. Its task is to protect the natural nail from colored pigment and create a strong bond with the base coat.

3. “Dry” in a UV or LED lamp. The polymerization process in the first case will take 1 minute, in the second - from 10 to 15 seconds. The procedure time depends on the manufacturer of the base gel and lamp.

4. Using gentle movements, level the top layer with a dry brush. Thanks to this, the gel polish will not spread.

Make sure that the base evenly covers the entire nail, without gaps or unevenness.

Applying a color layer

So, as a result of all the actions, we received the basis for an even and high-quality coating. Now all that remains is to choose the desired shade of Bluesky gel polish. How to apply a color layer correctly? Follow the recommendations:

• cover the nail at least twice with bright and pastel shades;

• shellac is applied in a thin layer, otherwise the result will be “waves” and unevenness on the surface;

• each layer must be “dried” in a UV or LED lamp, on average 2 minutes in the first case and 30 seconds in the second.

Remember! The basis of the Bluesky gel polish application technique: the thinner each layer, the better. Even if the first stage of coating turned out to have gaps, all the flaws will be hidden by the second. Pay special attention to the ends of the nail plate, because this is where the “weak spot” of any manicure is.

Final stage

The transparent Top Coat finish is applied in a thick layer. This is followed by a polymerization process under a lamp and treatment of the nail with a special liquid to give a glossy shine Cleanser, which performs two important functions - removes the sticky layer and cares for the cuticle.

The finishing gel must “dry” well under the lamp, otherwise at the stage of removing the sticky layer, the nails will lose their beautiful gloss.