How to stamp nails with gel polish - expertology magazine

Updated: 04/23/2021 11:35:07

Expert: Ekaterina Alekseevna Savitskaya

Beautiful, well-groomed nails are the pride of any woman. Therefore, the topic of nail art is always in trend, new techniques and methods of nail decoration are invented. Nowadays manicure with gel polish coating and stamping on it is very popular. This technique allows you to create original drawings, patterns, ornaments and bring the most daring nail designs into reality. Expertology.ru journalists found out from experts what stamping is, how it is done, and what you need to buy in order to start using this technique. You will find detailed information and instructions in this article.

Stamping - what is it, advantages

The term “stamping” comes from the English word “stamping”, the meaning of which is not difficult to understand - applying a stamp, embossing. Based on this, it can be argued that stamping in manicure is a specific technique for performing nail art, which assumes that the pattern will not be drawn with a brush, but applied using a ready-made stamp. Simply put, imprints are applied to nails coated with a durable polymer material, resulting in a specific pattern appearing on them.

Stamping has many advantages:

You can do a manicure that will be no worse than a salon one at home on your own.
You can make various patterns even if you don’t know how to draw or don’t have strong artistic inclinations.
If you know how to draw, but don't want to spend a lot of time doing artistic painting of your nails, do stamping. It will help save a lot of time, which is required to perform a beautiful, unique or simply original manicure.
Learning to do stamping is not difficult; you do not need much experience in nail art or high qualifications. Moreover, if you make a mistake during the learning process, you can wash off the pattern and do it again.
If you do stamping specifically for gel polish, then you can change your nail design at least every day. After all, the pattern is applied to a durable polymer coating, which will not be difficult to clean.
There are many types of stamping stencils with different patterns, made from different materials. This makes it possible to bring any idea to life.
You don't need to buy any expensive equipment. If you have already purchased a special UV lamp for polymerizing gel polish, all that remains is to select suitable stencil plates and buy a suitable stamp. There is a large assortment of such accessories on sale, including specialized sets, the price range is quite wide, you can buy both expensive stamps and plates, and cheaper devices. Since such accessories can be used repeatedly, such an investment in your own appearance will soon pay off.

Are there any differences between stamping on gel polish and regular polish? There is no fundamental difference in manicure techniques. In both the first and second cases, you simply cover the surface with a pattern using stamps. The only difference is that if gel polish is used, the pattern can be applied and washed off an infinite number of times without affecting the integrity of the polymer coating. If you are stamping on regular varnish, then in order to remove the pattern, you will have to wash off the decorative layer on which the pattern was applied.

Konad kit: everything you need in one package

The easiest way is to purchase all the tools and supplies in one fell swoop. This opportunity is given, for example, by Konad. It is especially recommended to use it for beginners who may have difficulties with the technology. Experts say that all components of the set are of very high quality. These are the kits that will help you hone your stamping technique. You definitely won't be able to create a complex, beautiful design the first time, but you can be sure that you're using the right products. It remains to correct errors in the work. But we will try to give you the maximum number of tips that we overheard from the nail service masters.

The Konad set consists of five metal plates, each of them has 4-7 small drawings. The scraper has a smooth working surface without nicks or cracks. There are no complaints about the quality of the stamp either. The set also includes three polishes. The density of the products is optimal for work! And this is very important! Konad Stamping is your ideal training base.

If you want to expand your design capabilities (or the varnish runs out), then, if necessary, replace these products with others. To keep clear, beautiful patterns on your nails, use thicker varnishes. Images will not bleed or fine lines will break.

Tools can also be purchased separately. If you are tired of drawings on records, look for new ones in the store, experiment and create!

Necessary accessories, tools, devices

To learn how to do nail stamping, you must first make sure that you have everything you need - consumables and tools. Experts recommend buying varnishes, topcoats, paints, stamps and other high-quality accessories

. How this is justified:

It is easier to work with high-quality materials, and you are less likely to make mistakes.
When it comes to gel polishes and other cosmetic products, high-quality products are safer for the health of your nails.
High-quality consumables and accessories will allow you to get excellent, lasting results.
Quality manicure tools will last longer, so by investing a little more money, you actually save.

So what do you need?

in order to do nail stamping on a durable polymer coating:

Preparations and tools for performing hygienic manicure.
Cosmetics for decorative manicure – nail primer, gel polish base, gel polish (or several products in different colors), topcoat. These preparations are needed in order to create a background on which the drawing will be applied.
A special LED lamp, under the light of which the gel polish polymerizes.
Prints with ornaments, plates on which the patterns and drawings you need are engraved.
Varnish or specialized acrylic paint for making drawings. Choose colors and shades, the nature of the finish to your taste. Experts recommend using not ordinary varnish, but acrylic paint for stamping. Such cosmetics are distinguished by increased brightness of pigments and allow you to create a clear, even graphic design. They do not blur during nail art and do not smudge when you start applying the top coat.
A small scraper designed to remove excess pigments from engraving.
A special stamp for stamping, which is designed to transfer an ornament from an engraved plate to the surface of the nail plates. This accessory looks like a small plastic object shaped like a cone. Its size is 10-15 centimeters. The lower surface of the base is elastic and convex, made of rubber or silicone.

Experts draw your attention to the fact that plates with drawings, a scraper and a stamp can be purchased individually or as a set. Which of these options is better? Let's try to figure it out - the pros and cons of buying sets:

The manufacturer included in the kit everything you might need to perform stamping on your nails, except for varnish. The accessories are made in the same style. You don't have to worry about forgetting to buy something. Most non-professional kits cost less than the individual parts if you buy the fixtures one at a time.
The quality of stamping accessories sold as a set may be lower than the quality of products purchased separately. In addition, the set may not contain exactly the stamping patterns that you need.

It’s up to you to decide whether to buy a set or individual components of the required list of accessories, because both options have their advantages.

General recommendations

Training allows beginners to acquire the necessary skills. It is impossible to get a perfect stamping manicure the first time. During the training process, you need to independently determine with what force it is best to apply pressure on the stamp and scraper.
The silicone pad should be treated with a buff before work. Because silicone imprints patterns worse than rubber. It is noteworthy that the use of transparent silicone is a “production necessity”, since the master sometimes needs to see the area of the nail to be decorated.
The coating on which the design is applied with a stamp must be completely dry. If the nail polish is not completely dry, the contours of the pattern will be blurred. It is worth noting that the contours will be unclear even if a top coat is applied immediately after stamping.
Transferring an image from a stamp can only be done once. The procedure is repeated for each nail.
The drawing can be supplemented and diversified. This is done using a thin needle or dots.
Varnish (paint) remaining on the skin is removed using a cotton swab dipped in nail polish remover. But it is better to use a special skin protection product that is used to treat the corresponding areas on the fingers. The product turns into a film that is very easy to remove.
For a bright and clear pattern, you must use a well-pigmented, dense varnish.

Preparation for nail design using stamping on gel polish

If all the necessary consumables and accessories have already been purchased, you can prepare the nail plates and begin the artistic process. It is unacceptable to apply gel polish and decorate the coating if the nails have not been pre-treated, as the result will disappoint you and you will simply waste your time and materials.

Preparation of nail plates involves performing a hygienic manicure. It is better not to do a trimmed manicure, since if you remove (cut) the cuticle, it will be possible to apply gel polish, and then the design, at least in a day. And if the cuticle is severely damaged - only after complete healing of the tissue. Therefore, it is recommended to perform a simpler and safer unedged manicure.

Disinfect your tools. Especially if they are used not only by you, but also by other people, even family members.
Prepare a bowl with tolerably hot water, a towel, files and buffs, in general, everything you might need to perform a hygienic manicure.
Remove the decorative coating from the nails, if any. It is advisable to use preparations that do not contain acetone for this purpose.
Give your nails the desired shape using a nail file; it is not recommended to use scissors or pieces for this purpose, since there is a high probability that you will accidentally cut off extra millimeters.
Immerse the fingers of one hand in hot water for 5-10 minutes to soften the cuticle and become more pliable.
Apply a special remover to the cuticle, which will dissolve the dead film. If there is no remover, simply push the cuticle to the base of the nail with a special pusher with a rounded edge or a soft orange stick.
Remove dead skin from the sides of the nail plate, just be careful not to disturb the integrity of the living tissue.
Treat all the nails sequentially, first on one hand, then immerse the fingers of the second hand in hot water, and then repeat all the manipulations.
Dry your nails thoroughly with a towel or a stream of warm air from a hair dryer. After this, you can apply gel polish and stamp on it.

With rhinestones and crystals

Designs using stamping techniques are decorated with rhinestones or glitter. To do this, you need to perform stamping using any of the techniques discussed above. To avoid chipping, you need to dry all layers for at least 60 seconds. After applying the top coat and drying the finishing layer, rhinestones are installed on the finished design. To attach them, you need to choose a thick base or transparent construction material.

These gels are installed in the form of a drop on top of the stamping and rhinestones are embedded in them. If inlays are created, it is recommended to attach rhinestones gradually. First of all, large rhinestones are installed on the liquid gel, to which small pebbles or broths are attached around the circumference.

How to perform classic stamping on gel nail polish

In order to stamp gel polish, you must first apply the gel itself and let all layers dry thoroughly. Sequence of actions if you use three-phase systems (base, gel polish, top coat):

Treat your nail plates with a dehydrator and degreaser. As a last resort, you can use alcohol in a concentration of 70-90%.
Apply a primer to your nails to protect them from the negative effects of polymers.
Apply a base or base for gel polish to your nails; it will improve the adhesive properties of the surfaces in contact with each other - the nail plates and the polymer layer.
Apply gel polish of the desired shade to your nails, including a transparent product. Don't forget to seal your nails by running the tip of the brush along the end of the free edge of the plate. Dry this layer under the light of a special ultraviolet lamp for manicure.
If the polymer coating is not as dense, uniform and rich as you would like, apply one or two more layers of gel polish, each of which must be thoroughly dried under a lamp.
Apply the final product to your nails - a clear or transparent top coat with glitter, which gives the long-lasting coating a beautiful glossy effect and protects the polymer coating, providing it with additional durability.
If the last topcoat has a sticky layer, remove it with a special product. After this, your nails with a completed manicure are completely ready for stamping. The pattern you apply can be adjusted and washed off with an acetone-based liquid.
If the tools you are going to use for stamping nails have already been used, wipe them with acetone or a special cleaner to remove any old paint, dust or dirt. Even the slightest particles of dirt can spoil the design, make it uneven or cause unnecessary stains.

How to perform the classic stamping technique on gel polish:

Select a plate with a pattern that you want to transfer to your nails. Apply a small amount of acrylic paint to its surface or, as a last resort, regular varnish if you have run out of paint. It is enough to drop one or two drops from the brush into the middle of a specific pattern, then distribute the paint over the entire surface of the pattern with the same brush.
Using a scraper, distribute the paint more thoroughly over the engraving, make sure that the pigments have filled all the grooves and recesses of the pattern, and remove excess paint. The scraper should be held at an angle of 45 degrees to the surface of the stencil. The coating should be uniform, without bald spots, bubbles or other irregularities.
Grasp the stamp by the base, holding it with the convex side down. Place it on the plate with the pattern and carefully roll the stamp so that the pattern you want is imprinted on its elastic, soft surface. The process is similar to what happens when a cylinder seal is used.
Without waiting for the paint on the surface of the stamp to dry, apply it to the nail plate. You can lightly “roll” the design to cover the entire nail. The main thing in the process is not to smudge the pattern. However, if this happens, or if you simply don't like the way the design looks on your nails, erase the design with nail polish remover and try again.
After the design on the surface of the nail plate has dried, which may take 2-5 minutes, apply another layer of top coat. Dry this layer under a lamp and finally treat the coating with a de-sticking agent. If a design made with acrylic paint gets on the skin around the nail plates, there is no need to worry, this happens often. Simply wipe the leather with lacquer thinner after applying and drying the resin top coat.
This classic version of stamping nails with gel polish allows you to create ordinary patterns and ornaments - lace, snowflakes, any graphic images. But if you want to apply real mini-paintings on your nails, made in several shades, you will have to master the technique of reverse stamping on gel polish using the gel polish itself. Reverse stamping is a real work of art, and in order to learn this technique, it is recommended to practice not on your own nails, but on special plastic models that exactly imitate the size and shape of real nails.

Autumn manicure with stamping photo 2022 ideas

Nail design for the cold season does not have to be boring and dull. Quite the opposite. At the moment, autumn manicure in 2022 pleases with its aesthetics and beauty.

It allows girls to look different every time. Gel polish: is the undisputed leader in sales in the nail industry market. This coating retains its original appearance for a month. Thanks to this unique invention, a variety of manicure options are performed.

Stamping (stamping) - a stencil design is transferred to the painted nail using the stamping method. To perform this, you will need special tools. Today, natural or almond-shaped nail shapes, called “soft squares,” are considered fashionable. Short nails are considered the current length.

The most important advantage is versatility - they can be adjusted to casual, discreet office style or evening luxury. In addition, they are practical and convenient.

Those who love long nails should choose the right length so that it is not too elongated and suits the shape of the fingers. Extended nails will look natural and natural if you choose a rounded shape.

How to do reverse nail stamping

The preparatory stage remains the same - do a manicure, remove and lay out tools and consumables, wipe the engraved plates and scraper with remover or acetone.

After this, apply a primer, base, and one or two layers of gel polish to your nails (don’t forget to dry under a lamp).

Next you need to proceed like this:

Apply paint of a suitable color to the engraving you want, level it with a scraper and remove excess pigment. It is better to use high-quality gel polish instead of paint, since all other manipulations will be carried out using this particular product.
Roll the stamp over the design so that the contours are imprinted on its rubber or silicone bottom surface.
In order to fill the contours, that is, literally color the picture as children do in coloring books, use the thinnest brush and gel polishes of the appropriate colors. Coloring of the design occurs directly on the surface of the stamp.
Hold the stamp under the light of your lamp and dry the design that is on it. If after this you feel that the colors are not bright enough, you can repeat the coloring procedure a second time. However, try to ensure that the paint layer is not too thick.
Cover the drawing with the thinnest layer of transparent gel polish and dry it under a lamp. If necessary, remove the sticky layer.
On a nail on which you have already applied several layers of gel polish, you need to apply the base again. After this, you need to take tweezers, pick up the image on the stamp under one of the edges, attach this plate to the nail, level it, carefully press and smooth it so that there are no bubbles, creases, wrinkles or other irregularities. Particular attention should be paid to the area around the perimeter of the nail plate - at the cuticle and on the free edge of the nail. It is convenient to press the film at the base of the nail with an orange stick.
As a rule, the nail plate does not have the same shape as the design made on the surface of the stamp; it is smaller in size. Therefore, the film with the pattern will protrude beyond the contours of the nail. This excess part must be carefully cut off with very sharp nail scissors with thin blades.
The last stage is to apply a top coat to the glued ornament, dry it under a lamp, and remove the sticky layer, if any.

If you do not use three-phase gel polish systems, but two-phase or single-phase ones, the sequence of steps for stamping does not change. First one or two layers of gel are applied, then the design, then the final finishing layer.

Gradient

Ornament with a smooth transition

You will need:

Varnish-paint for stamping in two shades;
White gel polish.

Procedure:

Create a white background by first applying a base;
Remove the sticky layer;
Choose a suitable pattern on the stencil plate and fill it with paints;
Use a scraper to go over the drawing parallel to the application of the dye;
Use a stamp to stamp the design onto the nail plate, cover it with topcoat and dry it in a lamp.

Gradient manicure: preparation, ideas, materials, 6 methods of execution

Vanishing Gradient

What to cook:

Gel polish in two shades and stamping paint to match one of them;
A fan blending brush, such as the TNL #1 Fan Brush.

Before starting work, cover your nails with a base coat and dry them in a lamp - only after that start creating a design.

Fill the cuticle growth area with varnish of one of the colors to about 1/3 of the entire area of the nail plate;
Take the second gel polish and cover the remaining area with it adjacent to the first;
Using a fan brush, spread the color from the cuticle to the center with light movements;
Send the gradient to the lamp for polymerization, then remove the sticky layer;
Fill in the selected pattern on the stencil with stamping varnish and transfer it to the nail using a stamp;
After the paint has dried in the open air, cover the resulting decor with a finish and fix it by polymerization in a lamp.

Sponge for air puffing

Materials you will need:

Aeropuffing sponge, for example, from the IRISK brand;
Aeropuffing paint in the color of stamping varnish paint - Patrisa Nail, IRISK.

Procedure:

Cover your nails with base and color, polymerizing each layer separately;
Remove stickiness;
Transfer the design from the stencil plate to the nail;
Place 2-3 drops of airpuffing paint on a palette or foil and scoop a small amount onto a sponge;
With light movements, drive the paint with a sponge from the free edge towards the center of the nail plate;
Once the gradient is ready, dry it in a lamp;
Apply finish and dry again.

Airbrush nails: technology, materials, tips and design ideas

How to choose gel polish for reverse nail stamping

The gel polish that is used as a substrate or background for the stamped image can be anything. It is better, of course, to choose products from reliable brands, but in this matter you can rely on your own preferences and financial capabilities.

However, the gel polish that you plan to use to color the contours of the picture must meet several requirements, otherwise you can’t even dream of a high-quality and beautiful manicure:

Good dense texture, allowing the cosmetic product to be imprinted well on the elastic surface of the stamp.

Increased pigmentation of gel polish. The drawing should ideally be applied in one layer, and at the same time turn out clear, rich, and bright.

It is advisable that a gel that does not have a sticky layer be used for the stamping design. The less manipulation you do with the drawing, the less likely it is that it will become deformed, smudged, or otherwise deteriorate.

Quite recently, special gel paints for stamping appeared on the cosmetics market. They print perfectly on gel polish coating. Alternatively, you can try this product – Elise Braun stamping gel polish, it has many good reviews on the Internet.

Advantages and disadvantages

The technique of applying patterns with stamps is in demand not only in the nail industry. Because the image you like can be transferred to any smooth surface. For example, on glass in a closet or the body of your own smartphone. Wide scope of application is not the main advantage. Stamping has a whole list of other advantages:

Allows you to save on the services of a professional manicurist. This is true, because you can decorate your nails in the most original way yourself.
You can choose the color of the picture. By the way, lovers of nail stickers are deprived of this opportunity, since they have to rely on the manufacturer’s proposals.
A stamping manicure requires a limited amount of time.
Each nail is decorated with the same pattern - perfectly smooth and clear (subject to following basic rules).

The disadvantages of stamping are associated with tools and materials, as well as a lack of experience. For example, if the paint (varnish) is too thick or dries quickly, then you will not be able to transfer the image. If you start working with a stamp on a non-dried coating, the design will be blurry or not work at all. That is why before starting work it is worth familiarizing yourself with the basic rules.

How to do dry stamping

This version of nail stamping may appeal to lovers of new and unusual manicure techniques. In this case, to create the pattern, it is not stamping paint that is used, but finely ground dry pigment. Such a product can be found in the assortment of large manufacturers - CND, Additives Medium Green, etc. In addition to the pigment, you will also need a brush for working with fine powder; for example, ruNail and Finest Kolinsky NDO No. 6 brushes do a good job. You also need to prepare a new stamp, the pad of which you did not pre-treat with a buff (read about the need for such treatment later in the article).

Sequence of nail art:

Get a hygienic manicure.
Apply primer, base and color layers - do not forget to dry each of them under the light of a lamp. The last layer of colored gel polish should remain tacky, meaning it does not need to be dried.
You need to apply colored powder to the design selected on the stencil. You can combine different colors to your liking.
The stamp is pressed against the pattern with an elastic surface and intercepts the powder, after which the pattern can be printed onto a sticky layer of gel polish coating.
Apply top coat and dry under lamp.

The concept of stamping and its relevance today

A fashionable manicure must be varied, but not every woman can paint something stunning on her nails, as a specialist would do. Stamping comes to the rescue. Thanks to it, you can create patterns on your nails that are in no way inferior in design, beauty of execution and complexity of the technique to manicure with designs made by hand by a master. A lot of videos with master classes have already been shot on the topic of stamping.

Stamping with pigments

This stamping technique will allow you to diversify the design by covering the paint used to apply the design with colored powder. To complete the design, you will need black stamping paint and a pigment for manicure (neon or rubbing).

The sequence of action is as follows:

Perform a hygienic manicure.
Cover your nails with primer, base and decorative layers, each of which needs to be dried under a lamp twice as long as usual.
On the last layer you need to remove the stickiness.
Select a design, apply paint to the stencil, spread it with a scraper or plastic card, transfer it to the stamp, then from the stamp to the nail.
While the pattern paint has not yet dried, you need to dip a soft brush into the pigmented powder and apply the powder over the paint with light tapping movements.
After one or two minutes, when the paint with the powder on top has dried, excess pigments can be swept off the nails with a clean, soft brush or paper napkin.
Apply top coat to your nails and dry the last layer in a lamp for twice as long as usual.

Unusual use of stamping tools in manicure

In addition to the classic designs, the techniques of which are described above, a stamp and stamping scraper can be used to facilitate the creation of popular designs.

Trendy speckled manicure

If you follow trends, you've definitely seen that speckled manicure has been popular over the last year. Of course, chaotic dots can be placed with a thin brush, but when using a stamp, you can correct the design before transferring it to the nail.

Degrease the stamping stamp and wait for it to dry completely;
Using a thin brush, place chaotic dots on the stamp using stamping paint. The dots can be of different sizes, with uneven boundaries - it all depends on the desired result;
If you need to fix something, use a small piece of tape. The adhesive part of the tape collects paint well and makes the drawing clean;
Stamp the design onto your nail and secure with topcoat.

"Blots"

Another option is blots with gel polish. They can be used as independent decor or complemented with another design.

Apply a strip of any gel polish to a grease-free, dry stamp;
Gradually the gel polish will spread, forming an uneven blot;
Transfer the drawing to the prepared background.

"Brushstrokes"

Creative designs with brush strokes can also be made using a stamping die and paint.

Apply an even stroke to the degreased surface of the scraper using stamping paint;
Print the resulting drawing onto a stamp. If necessary, use a scraper to correct the side edges of the printed stroke;
If desired, you can apply several chaotic strokes - this will make the design even more interesting;
Transfer the resulting design onto your nail.

Matte manicure ideas

Signs of high-quality engraved tiles for stamping

There are two types in total

stamping tiles:

Original products of a certain brand. Such products, as a rule, have quality certificates.
Products in the “noname” category, that is, those produced by small companies that do not even have the intention of earning a reputation among consumers.

Experts recommend giving preference to the first option. But there are several more signs by which you can “identify” high-quality plates

with engraving for stamping, not focusing on the brand:

There must be an identification code on the plate. It can be a set of numbers or a combination of numbers and letters. This code allows you to identify a design or set of designs that are engraved on the plate.
The plate in the package must be covered with a special protective film. It must be removed without effort and without any residue before using the accessory for the first time.
All lines of the drawing must be clear, no image disturbances, nicks or similar defects are acceptable.
All engraving lines on the plate must be the same depth.
Also, before purchasing plates, pay attention to whether the size of the pattern matches the size and shape of your thumb nail. It is also important to take into account the length of the plate, because you may want to extend your nails and stamp them. It will be a shame if the length of the pattern is not enough to perform stamping on extended nails.

How to choose a suitable plate for nail stamping

The choice of such accessories in the assortment of cosmetic stores is wide enough for the buyer to get confused when trying to choose the best option for himself. Let's analyze what criteria and aspects need to be taken into account when choosing nail stamping plates

The number of squares or rectangles with patterns on one plate. Naturally, it is more profitable to buy products that contain a larger number of ornaments than analogues. Even if you don't initially plan to use certain images, they may be useful to you in the future.
Theme of patterns on records. These can be New Year's motifs, emoticons, flowers, lace, abstractions, geometric shapes and figures, flags, letters, etc. The patterns are very diverse and you need to choose the right one according to your taste.
Material for making the stencil plate. It can be metal or plastic. It is believed that designs engraved on metal coatings are more durable and more difficult to scratch with a scraper.

Floristics

The most common floral motifs made using the stamping technique are the following.

Roses

This pattern is combined with a base coat of white, yellow, light blue, dark blue and beige. Glitter, rhinestones, and sparkles are used as additional decor.

Floral design on nails.

Daisies

These flowers are depicted not only in the traditional white and yellow tones. Blue, orange, green and pink shades are also allowed here. The core of daisies is often replaced with a scattering of sparkles or golden rhinestones. The print can be alternated with a continuous coating of several nails with a rich yellow varnish with a sugar effect.

Daisies on nails.

Peonies

A distinctive feature of this pattern is its characteristic oriental style. This design is characterized by not schematic, but clear images that focus on the smallest details. It is better to avoid additional decoration of the print so as not to spoil the specific style of Japanese painting.

Peonies on nails.

Stamping technology is especially popular because it has a number of advantages. This direction allows you to create interesting patterns without much effort. In this case, the image on all nails will be equally bright and clear.

Stamping is quite variable and allows you to choose patterns according to fashion trends and your own preferences. The nail industry offers consumers plates with a wide variety of prints - from large pictures (flowers, letters, hieroglyphs, silhouettes) to complex small patterns.

How to choose a quality stamp for nail stamping and prepare it for work

A good stamping stamp is not easy to find. Most of them, presented in the assortment of nail art stores, are difficult, if not completely impossible, to use. In the reviews of women who tried to do stamping on their own, you can find many complaints about the quality of the stamps. It often happens that the design on the rubber/silicone surface is not imprinted at all, and the device turns out to be inoperative.

To begin with, let us indicate that stamps, like engraved plates, can be original (branded) and non-original (the same “noname” ). Also, all possible options for such products can be classified as follows:

Depending on how many “working surfaces” the stamp has. An accessory may have one working side - the one that is soft and plastic. There are also stamping devices that have a stamp of one size and degree of plasticity on one end, and a second stamp of a different size on the other end. The head itself for copying a print of a design can even be removable. In this case, the set with the stamp base includes several heads of different colors. Such accessories are convenient to use if you need to print a shade of paint that matches the color of the main stamp head. For example, white paint on a white surface is difficult to see, and it is difficult to understand how well the pattern was printed.
Depending on what material the die head is made of. In modern production, rubber and silicone are used. The first option is not very successful, since rubber is characterized by increased cruelty. This material is not always able to repeat the shape of the nail plate when rolling the pattern. Therefore, applying a continuous pattern causes certain difficulties. In addition, rubber heads, as a rule, are very small in size, which does not allow for continuous coating. Silicone material is more convenient in this regard - it is softer, more flexible, picks up and holds pigments well, and allows you to apply a design to the entire nail plate in one go.

A brief overview of not very successful stamps for stamping nails - which options are better not to purchase:

Miniature stamp made by Konad. This is an original high quality accessory that will last you a long time. But it has too small a working surface. It is thin and flat, and is difficult to deform when placing a print on a curved nail. Therefore, experts recommend using this option only for printing individual fragments of a design or for performing a French manicure. It is not suitable for large stamping patterns covering the entire nail plate.
A small stamp from an unknown manufacturer, which differs in that there is a scraper on the second side of the handle. Many women purchase such a product in the hope of saving money; after all, there is both a stamp and a scraper for the same price. The advantage of this product is that the scraper will not get lost, which happens quite often. But the main working surface is small, which makes the tool not very convenient to use and certainly not universal for performing different stamping patterns.
Non-original stamp with a rectangular surface and a replaceable head. Accessories with rectangular working surfaces, as practice has shown, turn out to be the most effective for stamping. But the fact that the die head is removable has absolutely no meaning if the set does not include other replaceable silicone pads. As a rule, such pads are not only absent from the stamp set, but also generally not available for sale. However, given the low cost of such devices, they can be regularly updated without much damage to the budget.
Stamps for stamping are double-sided with white pads of different sizes. This tool is positioned as a universal tool. One surface is small and elastic, which allows you to leave small, clear imprints of individual decorative elements. The other pad is large and plastic, adapts well to the shape of the nail, allowing you to apply full-fledged designs on large and long nails. But there is one “but” - such accessories can poorly capture the pattern from the stamping tile.

In order not to disappoint you at all with the quality of stamping dies, we will give an example of a successfully executed accessory. For example, the Born Pretty brand tool does its job well. This is a clear silicone stamp with a hollow clear handle. The manufacturer tried to take into account all the needs of customers and brought to life a very interesting and practical idea:

When transferring a pattern or ornament from a tile to a stamp, from the stamp to the nail plate, you can see through the pad how the design is laid out. That is, you have the opportunity to timely assess whether all elements fall into their intended place.
On the transparent pad, any colors of the contours of the patterns are clearly visible - from white to black.
The density of the pad and its size are optimal for making designs and ornaments of any size on any surface, even a strongly curved one.
In general, if you experiment with different stamping dies, you can quickly choose the best option for yourself. They are not very expensive, so such purchases will not make a significant dent in the family budget.
In order for the stamping process to be successful, it is important not only to choose the right accessories, but also to prepare them for work. To begin with, the silicone or rubber surface of the stamp needs to be made not as smooth as it was initially. This is necessary so that the rougher surface will better adhere to the varnish applied to the engraving of the plate. To increase the roughness of the material, it can be lightly treated with a nail polishing buff. There is no need to be zealous in this matter, since you can easily damage the stamp head, as a result of which the lines of the drawing or pattern will no longer be clear enough.
Also, before starting to work with the stamp, its working surface needs to be wiped with NDL (nail polish remover). Flint sticks to silicone very quickly, so additional cleaning will not be superfluous even if the stamp appears relatively clean.

Dot stamping design

A novelty of last season is the dot stamping design. In these designs, the drawing is made with dots that are grouped into a single image. To get a high-quality print using this technique, you need to use pigmented gel paint and a plate with deep engraving. In this case, you will be able to print dots that will not merge together.

In conjunction with this technique, you can use gradient methods or decorate the pattern with rubs.

Most often, masters in salons use this stamping technique to create contrasting designs, for example, a black dot pattern on a white background.

Stamping for nails - tips for beginners from professionals

To ensure that stamping is not accompanied by mistakes and brings only pleasure from a beautifully executed manicure, consider the advice of experienced nail art masters:

Save acrylic paint or special gel for painting the outlines of drawings. Do not apply pigments to the entire engraved plate if you see that it is much larger in size than the surface of the nail plate, even on the thumb. Since stamping is a technique that requires a lot of materials, you can learn to save them. To do this, apply a strip of paint at the very beginning of the drawing and distribute it so that it is enough to cover the nail, but no more.
Use a plastic scraper with smooth edges rather than a metal one. If necessary, you can even use any unnecessary plastic card. If you have a metal scraper, keep in mind that sooner or later it will begin to scratch the engraved plate, rendering it unusable.
Clean the engraved plate, scraper and stamp surface immediately after performing a manicure, before the paint has had time to dry too much. This can be easily done with nail polish remover if the gel is still fresh.
It is not recommended to clean the surface of the stamp with cotton pads, swabs or napkins, which may leave tiny lint on the rubber or silicone. Such particles can ruin your manicure next time. Therefore, it is better to use the sticky side of the tape to clean the stamp. If you use one side of double-sided tape, which has a stickier surface, the cleaning will be better and faster.
As we already mentioned, when transferring a design to the surface of the nail plate, the paint often gets on the skin around the nails. To protect your skin and make cleansing easier, apply a thin layer of rich cream to your skin. A more reliable way to protect the skin around the nail is to use a specialized “liquid tape”. This liquid substance of a bright shade, which is clearly visible on the skin, is easily removed along with the adhering pattern - just pick it up by the edge with tweezers. This product is produced by many brands - MASURA, Kiesque Liquid Palisade, EL CORAZON Kaleidoscope Cuticle Defender, Pure Manicure Dance Legend, Skin Defender, Fire Star. Moreover, you can choose how it is more convenient for you to apply the product - with a brush or a sponge, like with lip gloss.

We hope that these tips will help you do stamping quickly, easily and without mistakes!

Summer manicure with stamping photo 2022 fashion options

Modern fashion is good because it sets the main directions, but does not set strict boundaries and does not limit creativity. Among the general trends that will be observed in manicure 2022, naturalness remains relevant - even if you decide to grow your nails, they should look completely natural.

Since 2021 continues the traditions of its predecessor and leans towards natural beauty, the length of the manicure remains the same - the free edge of the nail should not protrude more than a couple of millimeters.

Even festive manicures for special occasions, such as a wedding or anniversary evening, allow for concessions only for medium length. The shape of the nail also implies maximum naturalness and femininity - oval or almond-shaped nails, characterized by smooth, rounded lines, are in fashion.