A beautiful manicure is not only an even varnish coating of the nails, but also a thorough treatment of the hands and nail plates. Those who regularly visit nail salons know that previously they only did classic edged manicures. Now masters use a special device for these purposes, but many do a combined manicure, where they use not only the device, but also tweezers or nippers. It is on this tool that not only the beauty of your hands will depend, but also the lifespan of the gel coating. After all, treating your hands with a low-quality tool will not allow you to achieve the desired result, but will only harm the client.
What are nail clippers and their types?
This manicure tool is designed to work with cuticles and nails. Although many tools are used in nail care, it is the clippers that require the most attention. With their help, the master processes the nails, removes the cuticle and rough skin on the side ridges. The positive result of the procedure will largely depend on this tool.
So, according to their purpose, wire cutters are divided into three types. They differ in size, length of the cutting part and length of the handles. The first type includes nippers for working with cuticles and side ridges. This tool is also called a cutter. Cutters are used by masters when performing classic trimmed manicures or when using a combined technique. These tweezers also differ in the length of the cutting part; here it varies from 3 to 20 mm. In addition, there are differences in the “heel” or the size of the protruding part. Also, unlike other types of tools, here the cutting part has a smaller width. Thanks to this feature, the master can easily cope with dry skin. Also, when working with cuticles, do not forget that the cuticle plays a certain protective role, so you need to cut it off very carefully so as not to make a hangnail or cut thin skin.
The second type of nippers is a tool for working with nails. This version of tweezers serves as an alternative to manicure scissors. Masters use these clippers to cut off large or rough nails. Unlike scissors, such a cut will not delaminate the nail plate, and also has a larger size and greater power, because working with a nail will require more effort than working with thin skin.
There are also nippers designed for pedicures. Unlike the two previous types, the design here is reinforced, and the cutting blade varies from 15 to 20 mm. Since the skin and toenails are rougher and stronger, this design will help you perform the necessary manipulations with ease. It is worth noting that nippers can also cope with the problem of ingrown toenails.
Glasperlene sterilizer: pros and cons
When doing a manicure at home, disinfect scissors, tongs and tweezers with alcohol. If you plan to do this professionally, you will need a special autoclave for disinfection. They come in two types: ball and ultraviolet. Let's take a glass-perlene ball sterilizer as an example. The device allows you to sterilize a large number of small metal instruments in accordance with internationally accepted standards and regulations. It is a flask that is compact and heat-resistant.
The device heats up, the pressure and temperature inside rises. The flask is pre-filled with special glass balls, which are heated to 250 degrees, then small steel instruments are placed inside.
The sterilization itself lasts from 10 to 20 seconds. During this short period of time, the metal heats up to a temperature at which all microorganisms and bacteria die. After carrying out the number of procedures established by the operating rules, the balls are replaced with new ones, because the old ones deteriorate. The electrical appliance heats up very quickly and loses heat slowly, so the technician can work with a large number of clients. Compact dimensions allow the device to be placed on a table without wasting space.
Instructions for using the sterilizer
- After finishing the manicure procedure, wipe the blades of the tongs with alcohol or other sterilizing compound.
- Connect the sterilizer to the network.
- Place the balls into the flask and press the button.
- Wait until the balls are completely heated (the time is in the instructions), place the tools in the flask with the blades down and close the lid.
- Allow the required time for sterilization.
Advantages of a sterilizer
- High speed of disinfection of the contents of the autoclave.
- Sterilization does not lead to corrosion or deformation of steel objects.
- The device uses electricity economically.
- The small size of the device allows you to intelligently use the work space.
- Excellent price-quality ratio.
Flaws
- The sterilizer flask is small in size, therefore it can accommodate a limited number of instruments for sterilization at one time.
- The autoclave disinfects only metal utensils.
- Only the working area, which is placed inside the balls, is sterilized.
Terms of use
In order for the final result of the manicure to match your expectations, you must use the tool correctly. First, it’s worth talking about cuticle nippers. Before starting work, you should thoroughly treat the tools with alcohol or an antiseptic. After this, you need to hold your hands in a bath of warm water; for a better result, you can add sea salt or liquid soap. This is necessary to soften the cuticle. If there is no time or opportunity for a bath, then you can use a special product called a remover. Each manufacturer indicates the rules of use on the packaging.
When the cuticle becomes soft, use an orange stick or pusher to push it back. After this, you need to carefully remove the skin under the cuticle, which is called pterygium. Now you can start cutting the cuticle. This must be done carefully, using the edge of the cutting part; ideally, it should be cut off with one strip. Beginning masters may not succeed the first time, but over time they will definitely succeed. The tool should be positioned at a slight angle parallel to the area being treated. There is no need to press, but you should move easily. If a burr suddenly appears, it will need to be carefully cut off. You should not leave small “sticking out” pieces of skin, as after a while they will dry out and cause inconvenience.
When the procedures are completed, the nippers should be cleared of pieces of skin, and the joints of the instrument can be lubricated with special oil.
How to store it correctly
In order for the instrument to serve faithfully for a long time, the rules of care and storage should not be neglected.
First, you need to decide where to store the wire cutters. An ideal option for these purposes would be a special pencil case, but if you don’t have one, then a cosmetic bag will do. In this case, it is better to put a special tip on the cutting part so as not to damage the blade. If the tool will be stored in a special case, do not forget to set the release spring. This is required so that the cutting elements do not come into contact with each other. Also, do not forget that the wire cutters should not be dropped. In this case, the cutting edge may be damaged or complete failure may occur.
Secondly, it is necessary to constantly monitor the sharpness of the blades. The sharper they are, the better the procedure will be performed. Sharpening should not be done on your own, but it is better to contact a specialist. If the instrument is used frequently, this procedure should be performed twice a year.
Do not neglect proper cleaning of the instrument. If it is used at home, but for these purposes you can use special liquids for sterilization, and in the salon it is better to use a dry-heat oven. If you do not process the clippers in a timely manner, corrosion and plaque may occur, which will prevent you from getting a perfect manicure, and over time will completely damage the clippers.
It is also recommended to periodically drip machine or household oil onto the joints of the tool. Thanks to this, the cutters will run smoothly.
These rules are not so complicated, and they will not take much time. But by doing them regularly, you can increase the service life of the nippers, which will allow you to avoid spending money on buying new ones for a long time.
Rules for caring for manicure accessories
After each use, the instrument should be cleaned of any remaining skin and disinfected. The product for home use can be wiped with alcohol. Professional cuticle remover must be regularly treated with an antiseptic. The mechanisms are treated with a special liquid. You cannot use solutions with aldehydes and bleach, they have an aggressive effect on the metal.
The pliers should be stored in a closed place (case) with the cutting side up, this will avoid premature dulling.
With timely sharpening and simple maintenance rules, the tool will last for many years.
How to choose good wire cutters
Regardless of whether the wire cutters will be used at home or in the salon, you should purchase only high-quality products from a trusted manufacturer. Therefore, it is better to make a purchase in a specialized store.
Now you need to pay attention to the material from which the tweezers are made. Manufacturers mainly make such tools from steel. It can be alloyed, carbon or medical. Products made from medical steel perform better than others, since this material is resistant to chemical treatment and is also not afraid of heat sterilization. The cutting part of such products remains sharp longer. Many well-known brands also produce cutters made of stainless steel, which in addition has a cobalt coating. Due to this coating, the instrument tolerates any sterilization well.
It is important to pay attention to the quality of sharpening. If sharpened correctly, there will be no small gaps left between the cutting parts. You can also check the quality of sharpening on a regular plastic bag. It should cut easily. If this does not happen during testing, then during work it will not be possible to cut the cuticle evenly, and the client may be injured.
You also need to check the progress of the product. Opening and closing should be smooth. If the handles bounce sharply, you can easily injure the delicate skin. Don’t forget that the main thing is that the tweezers fit comfortably in your hand. To do this, you can compare several models. In this case, it will be much easier to adapt to the tool and make the perfect manicure or pedicure.
Best Cuticle Nippers
Staleks Classic N3-12-08 (KM-07)/NC-10-8
This model of tweezers from the KM series is considered the smallest, its length reaches 10 cm. But at the same time, the instrument has an elegant appearance. Due to the fact that the product has an ergonomic design, the nippers will fit comfortably in the hand and the master will not feel tired even during long-term work.
For the manufacture of “Staleks Classic N3-12-08 (KM-07)/NC-10-8” surgical steel is used. And the sharpening of the cutting part is done manually by experienced craftsmen. To do this, they use a diamond-coated wheel. Thanks to this approach, the tool performs ideally during operation. The cuticle will be cut smoothly, the skin will not stretch during operation, and the client will not receive damage. It is also worth noting that re-sharpening will not be required for several years, even with frequent use of tweezers.
The length of the cutting element “Staleks Classic N3-12-08 (KM-07)/NC-10-8” is 8 mm, and the weight of the tool is 31 grams.
The average cost is 750 rubles.
Staleks Classic N3-12-08 (KM-07)/NC-10-8
Advantages:
- Convenience when working;
- Manual sharpening;
- Material of manufacture;
- Trusted brand;
- Affordable price.
Flaws:
- Not detected.
Zinger MC-350
The German brand “Zinger” has long established itself in the market and is very popular among buyers. Zinger MC-350 is ideal for both home and salon use. To manufacture this model, the manufacturer used steel containing nickel. And due to the fact that the tweezers underwent special treatment during the manufacturing process, during operation they will be subject to corrosion and will prove to be very durable. The tool has a convenient shape, thanks to which the master can easily handle even hard-to-reach places.
The cutting part has a length of 6 mm. Thanks to manual sharpening, the blades will not become dull for a long time. It is also worth noting that when closing the blades do not leave any gaps, and the tool has a smooth move due to the double spring. The total length of the Zinger MC-350 is 10 cm.
The average cost is 750 rubles.
Zinger MC-350
Advantages:
- Available in three color options;
- Manual sharpening;
- Durable sharpening;
- Ease of use.
Flaws:
- Sometimes you come across a poorly sharpened tool.
Yoko SK 003
Japanese heat-resistant steel was used to manufacture this model. Therefore, the product is highly durable, is not afraid of frequent sterilization and is not subject to corrosion.
“Yoko SK 003” has a double spring, due to this the operation will be smooth, which will add convenience to the master. The blades have a sharp edge and their length is 7 mm. Due to this, you can easily cut the cuticle or get rid of hangnails. Due to the fact that the manufacturer pays great attention to the joint of the pliers, the blades meet tightly and the service life of the product is extended. You should also not ignore the fact that the blades go through more than one processing stage, and then are sharpened by hand by experienced craftsmen.
The average cost is 1170 rubles.
Yoko SK 003
Advantages:
- The product is popular among professionals;
- Workmanship;
- Smooth ride;
- Sharp blades;
- Wear resistance.
Flaws:
- Not detected.
Metzger CN-08(2)-T(9mm) Cobalt (Double spring)
These tweezers can be used for both manicure and pedicure. Due to the fact that the product has a special design and spring, during operation the user receives a soft stroke of the cutters. This will ensure that there are no cuts or injuries in the long run.
For the manufacture of “Metzger CN-08(2)-T(9mm) Cobalt (Double spring)” tool steel is used, which does not cause an allergic reaction. The blades are 9 mm long. Thanks to high-quality manual sharpening, the tweezers easily peel off the cuticle without leaving burrs. “Metzger CN-08(2)-T(9mm) Cobalt (Double spring)” is characterized by high strength and resistance to corrosion, due to the fact that during manufacturing the tool is controlled at every stage. Also included is a silicone cap. The total length of “Metzger CN-08(2)-T(9mm) Cobalt (Double spring)” is 11 cm.
The average cost is 900 rubles.
Metzger CN-08(2)-T(9mm) Cobalt (Double spring)
Advantages:
- Strength;
- Long blades;
- Can be used for pedicure;
- Affordable price.
Flaws:
- Hard to find on sale.
Nippers review
A thoughtful lady will always choose nail clippers from a wide range of branded products. Large specialized manufacturers are responsible for their reputation for each instrument produced. Therefore, you will not find fakes on the shelves of such brands. We will list the market leaders in professional manicure tools that have earned the trust and recognition of beauty salons and ordinary customers in all corners of the planet.
Zinger
The company has an impeccable reputation and worldwide fame, the honesty and reliability of which no one doubts. Manicure products from this brand have proven to be excellent durability and lack of corrosion due to a special forging method. The quality of sharpening is amazing, allowing you to extend the sharpness of the tool for a long time.
It enjoys a well-deserved reputation as the best manufacturer of nail design products, delighting with convenience, stylish design and very affordable prices. Zinger offers a wide range of professional nippers to suit every taste and budget: from specialized tools for craftsmen to budget options for home procedures. For special clients, there are cuticle tweezers with a non-standard design and a special coating on top: silver or gold upon request.
The brand offers many options with different blade widths and different handle lengths. Every buyer will find an option for himself. The price tag of different copies ranges from 300 rubles to 800 rubles on average.
Yoko
Connoisseurs of tools for perfect nail design will tell you which cuticle nippers you need to choose from among the mass of good manufacturers. Many will advise ladies to first purchase instruments from the Japanese company Yoko.
There are several reasons for choosing:
- the strongest cobalt-steel alloy;
- manual sharpening;
- unlimited range of tweezers;
- long service life;
- no deformation or corrosion;
- incredible convenience of cuticle nippers.
The brand offers options for nail and cuticle clippers with any type of spring mechanism: from single to spiral. You can also choose devices with completely different cutting edge lengths: the value ranges from 5 to 14-15 millimeters. Based on the individual characteristics of the instrument, the unit price varies from 400 to 800 rubles for budget products, and reaches 1200 rubles and higher for the best specimens.
Stalex
This company has a long history and vast experience in the production of devices for high-quality trimmed manicure. Cuticle nippers are made only from durable surgical steel, which provides them with high wear resistance and a long service life.
The main difference between the brand’s side cutters is the thermal hardening process of their material, which leads to minimal dulling of the tweezer blades during operation.
Nippers are always sold with a special case or small bag for storage. Protective caps must be placed on the cutting edges of the tool.
The brand is very popular among nail salons. Any master will choose pliers based on his preferences and requests: the model range amazes with the variety of configurations. There is a wide range of products with different lengths of blades and handles, and the size of the devices themselves varies. There will always be nippers not only for manual work, but also directly for cuticles, as well as pedicure.
The brand guarantees its customers a minimum of five years of operation of its products without sharpening, since the blades are sharpened by hand on both sides. The cost of cutters ranges from 500 to 2600 rubles, depending on the model.
Metzger
The brand presents to customers the best cuticle tweezers in the budget range: from one hundred or two hundred to five hundred rubles. The cutters are made from ordinary stainless steel, which is less durable and resistant than surgical steel, which explains the affordable prices.
The quality of the cutting edge is quite decent, but requires sharpening after a certain period of time. The company also pleases women with copies with professional characteristics, which are much more expensive and their price sometimes reaches up to 1000 rubles per instrument.
Eclat
Eclat nail clippers are made of durable surgical alloy. The material allows for rough cleaning and disinfection of the device with a special solution or by boiling. A distinctive feature of this company’s nail clippers is the smooth working mechanism, which allows you to cut off the periungual folds of skin easily and painlessly, avoiding jerking. The manufacturer is famous for its affordable price tags: a quite decent option costs between 500-600 rubles.
Lazeti
LAZETI cuticle remover nippers have many advantages: an excellent method for sharpening products by hand, high-quality surgical alloy, durability, and affordable prices.
I am pleased with the high-quality hard packaging to store equipment. All important information about the product must be printed on the case. A special cap is usually placed on the working surface to prevent dulling and damage to the surrounding area.
Avon
The model of this brand is very inexpensive (129-220 rubles depending on the catalog offers), it may well suit you, but remember that for many women it is too tight. Initially, additional expenses are necessary, since the sharpening is not ideal. Many ladies complained about these cutters, namely: they tear and pull the cuticle, and cut unevenly. The downside for many newbies to the nail industry is the thick blades. In addition, the cutters are sold without normal packaging and do not have identification marks.
The advantages of cuticle nippers from Avon are: compact size (9x5 cm), do not slip in your hands, protective cap, stylish design, the ability to purchase at half the price at a promotion.
Solinberg
The nail clippers of this company are known all over the world and prove impeccable German quality. They are made of alloy steel alloy and are sharpened exclusively by hand.
Often, cuticle nippers are coated with a special compound consisting of cobalt and nickel. This manipulation makes the product even stronger, more durable and maintains its sharpness.
Best nail clippers
Mertz 3420-14
This model from a German manufacturer has an elongated size and a matte surface. With this product you can do a classic pedicure or manicure.
To manufacture Mertz 3420-14, the manufacturer used high quality medical steel. The nippers have an ergonomic design, thanks to which they fit comfortably in the hand and do not cause inconvenience during operation. For convenient storage, “Mertz 3420-14” has a lock. The presence of a double spring ensures easy movement of the tool during operation.
"Mertz 3420-14" is factory sharpened. The length of the cutting part is 25 mm, and the total length of the nippers is 14 cm.
The average cost is 800 rubles.
Mertz 3420-14
Advantages:
- Workmanship;
- Ergonomic design;
- Durable design;
- Affordable price.
Flaws:
- The product requires additional manual sharpening.
Staleks Expert N7-61-16
This model is made of medical steel, which does not corrode. “Staleks Expert N7-61-16” have a narrow and long blade, which allows you not only to shorten the length of the nail plate, but also to work with ingrown nails. Moreover, when removing an ingrown nail there will be no pain, and the whole procedure will take a minimum of time. Due to the fact that the cutters have a small radius, the cut is precise. You should not ignore the comfortable shape of the handles; working with such a tool is convenient and there will be no feeling of discomfort in your hands for a long time.
The blade length is 16 mm, the tool can be sharpened multiple times. The total length of “Staleks Expert N7-61-16” is 13 cm.
The average cost is 1400 rubles.
Staleks Expert N7-61-16
Advantages:
- Convenient to work with ingrown toenails;
- Suitable for home and professional use;
- Sharp edges;
- Ergonomic shape.
Flaws:
- Not detected.
Zinger T-330
This model is designed to work with thick and rough nails, so it will be an ideal option for creating a beautiful pedicure. This tool is best used when scissors cannot cut the nail plate.
For the manufacture of Zinger T-330, high-strength steel is used, which will significantly extend the service life of the product. The elastic spring will ensure smooth operation during operation. The cutting edge has a length of 12 mm, and it is worth noting that it was sharpened by hand. Even with frequent use of the tool, the blades will remain sharp for a long time.
The average cost is 2700 rubles.
Zinger T-330
Advantages:
- Manual sharpening;
- Convenience when working;
- Verified manufacturer.
Flaws:
- High price.
Yoko SK 019
This product is made from stainless steel, which has increased strength. Therefore, Yoko SK 019 will be an ideal option when performing a pedicure.
The cutting edge has a length of 17 mm, with their help you can evenly cut the nail without any additional effort. For convenient operation of the tool, a single spring ensures easy and smooth operation. The manufacturing material allows the nippers to be sterilized many times without deforming or changing their original qualities. The total length of "Yoko SK 019" is 13 cm.
The average cost is 820 rubles.
Yoko SK 019
Advantages:
- Reinforced design;
- Smooth ride;
- Manual sharpening;
- Even hard nails can be easily cut;
- Trusted manufacturer;
- Affordable price.
Flaws:
- Not detected.
Criteria for choosing a professional tool
An important criterion when choosing is smoothness. The handles should be compressed and unclenched gently, without squeaking or jamming. Tight tongs are difficult to operate with one hand. The softness of the stroke depends on the quality of the connection between the parts of the pliers. Other recommendations on how to choose cuticle nippers:
There are products on sale with different lengths of teeth. How to choose nippers depends on your experience in using the tool: manicurists are advised to choose nippers with teeth larger than 7 mm, but for beginners it is better to choose a blade length of 5 mm (in this case, the risk of skin injury is minimal). The longer the blade, the easier it is to sharpen.
