Properties of glasperlene sterilizer and rating of the best

Despite the fact that in our time the procedure of manicure and pedicure has become practically safe for all women, it is still necessary to follow safety rules, as well as comply with hygiene requirements. These include carrying out disinfecting procedures before and after the procedure. In order not to spend a lot of time cleaning instruments, craftsmen prefer to use sterilizers designed to remove harmful microbes and bacteria from the surface. The most popular of them is the ball sterilizer, which is preferred by many professionals due to its convenience and effect.

Properties

A glassperlene or ball sterilizer is a small device with glass beads inside. Processing occurs by heating the balls to a temperature of 160 to 250 degrees.

The name quartz ball sterilizer, which is the same as glasperlene, is often used. The fact is that the filler balls are made of quartz glass, which has high strength.

The device is used at the third and final stage of processing after pre-sterilization cleaning and disinfection, but is the most controversial sterilizer of all existing ones.

How and with what to disinfect, sterilize and clean manicure instruments

Important features of the ball sterilizer:

1. The device does not allow the instrument to be completely immersed in the environment of heated balls., which contradicts SanPiN 2.1.3.2630-10 “Sanitary and epidemiological requirements for organizations engaged in medical activities.” Only small objects, such as cutters, can be completely immersed, and then removed using tweezers. It is also prohibited to sterilize instruments with locks or internal channels in this device.

2. After treatment, the instrument is used immediately - it cannot be stored inside or outside the sterilizer after the end of the treatment cycle.
3. It is impossible to track the result of sterilization - if an indicator is placed in a tendon or autoclave, then this cannot be done with a glasperlene sterilizer, which means there is no guarantee that the treatment was successful.
   Sukhozhar - types, choice, use of a sterilizer
4. The model of glasperlene sterilizer used must have a certificate of conformity and have a registration certificate from Roszdravnadzor for use in the Russian Federation.
5. Rospotrebnadzor employees may regard the use of ball processing as a violation . If you still plan to purchase a device, contact the regional office of Rospotrebnadzor or Roszdravnadzor with a specific model and find out if it is possible to use it.

Device operation technology

Anyone can learn to use such a simple ball device. You just need to carefully monitor the time and indications of the sterilizer.

1. First you need to fill the flask with quartz balls, and then close the lid.
2. After turning on the ball-on device for sterilizing manicure instruments, you need to monitor the light bulb located on the body. If everything was done correctly, it will light up green.
3. When the green light goes off, it means that the manicure tool sterilizer has warmed up enough for further processing. After carefully lifting the lid so as not to get burned, you need to put in the items necessary for disinfection. When 20-30 seconds have passed, you can pick them up from a special container.

All this time, the light will show the temperature maintained by the ball sterilizer.

The instructions say that 250 degrees is enough for complete processing with scissors or tweezers.

Flaws

1. You will have to change the balls periodically - approximately once every 6-12 months.
2. Only the working part of the tool is processed, and the handles remain untouched.
3. The balls dull the tools.
4. Inability to control the results of sterilization.

In fact, a Glasperlene sterilizer, even if it has a registration certificate from the Ministry of Health, can only be used to sterilize cutters.

As you can see, both the pros and cons of the device are quite significant. Before purchasing a device, be sure to weigh all the pros and cons and be sure to consult the regional office of Rospotrebnadzor.

Storing instruments after sterilization

According to SanPiN, after an instrument has been processed in an autoclave or dry-heat oven, it must be stored in a special sterilizer box under the influence of UV radiation for no more than 7 days. This is provided that the sterilizer has not been turned off during this entire time. Otherwise, the tool must be reprocessed. The cost of a UV sterilizer is not that high - from 2000 to 5000 rubles. Its purchase, as well as the purchase of a manicure vacuum cleaner, should be considered as a necessary investment in your business.

Application

Areas of application of glasperlene sterilizer. Who is it suitable for:

1. For those who plan to sterilize small instruments in it - primarily cutters;
2. For those who do manicures at home for themselves and relatives, that is, for personal needs . In this case, the risks of infection are minimal and the heated balls will be sufficient for processing;

Disinfection and pre-sterilization cleaning of manicure instruments: how to choose a disinfectant and prepare the solution correctly

Rating of dry heat sterilizers

Disinfection methods

After the manicure, the cutters are treated with a brush or napkin to remove saw cuts, skin flakes, and dust. Only after this do they begin disinfection. There are two methods to choose from:

• chemical - special disinfectants will be required;
• physical - incandescence, boiling, ultrasonic or ultraviolet treatment.

We disinfect with special solutions

Disinfection is effective when using certified solutions - Optimax, Estilodez, Alaminol, Gigasept. They are divided into safety classes, are provided with detailed instructions for use and contain anti-corrosion additives.

They are used not only in the beauty industry, but also in medical institutions, as they have a powerful antimicrobial, antibacterial, and antiviral effect. Professional disinfectants are suitable for home use.

Treatment of manicure instruments with Optimax solution at home :

• Pour a liter of cold water (or tap water) into an enamel container or plastic processing box;
• add 45-50 ml of product and stir thoroughly;
• We immerse the cleaned cutters in the solution for 15-20 minutes.
• After the time has passed, lay it out on sterile napkins.

It is important to strictly observe the dosage of the chemical reagent and the exposure time. If the conditions are violated, the cutters will either be poorly processed or their service life will be reduced. And yet, rotating nozzles cannot be disinfected and sterilized by wiping or spraying - only complete immersion in solutions.

Physical methods

How to disinfect manicure tools at home if there are no special solutions? We immediately warn you against all kinds of hand sanitizers and hydrogen peroxide. The effect is weak, but it’s easy to ruin the cutters.

Use simple boiling:

• clean the cutters with a brush, rinse with detergent, and place on a napkin;
• Fill a deep saucepan with water so that the tools are covered by 2 fingers, bring to a moderate boil;
• Using tongs, lower each cutter into boiling water, after 15 minutes remove the container from the heat.
• We take out the nozzles and let them swell on a sterile napkin.

After disinfection, pre-sterilization cleaning occurs. The cutter is washed in running water with detergent and dried with a napkin. This step neutralizes chemical residues. drugs and the most persistent contaminants.

How to choose

Glasperlene sterilizers are no different in their functionality - they are all equipped with a power button and indicator lights, but there are several criteria that you need to pay attention to when purchasing:

1. Heating temperature . This point especially applies to devices ordered from online sites like Aliexpres. Based on the results of tests carried out by customers, it was revealed that more than half of the received devices heat up to 140 degrees instead of the stated 250. In addition, they require at least 30 minutes to warm up to this mark, although the manufacturer writes about 10-15 minutes of preheating.
2. Hull strength. The design of the devices is almost identical, however, the material used for production is different. It is better if it is made of metal or durable plastic.

3. Availability of rubberized feet . Pay attention to the material of the legs. If they are rubberized, the device will not slide on the table surface.
4. Availability of a registration certificate from Roszdravnadzor. The document confirms the registration of the device in the state register of medical devices and allows its use on the territory of the Russian Federation. This is the first thing to ask the seller.

User manual

When using for the first time after purchase, be sure to read the instructions for the device.

Step-by-step use of glasperlene sterilizer:

1. When using for the first time, pour the balls into the device.
2. Connect to the mains.
3. Close the lid and press the power button.
4. Wait until the balls are completely heated. The time is indicated in the instructions for the device - most often it is 12-15 minutes. Once the temperature reaches the maximum, the indicator light will turn off or change color.
5. Open the lid and lower the tools so that they do not touch the bottom and walls. If the cutters are being sterilized, “sink” them into balls using tweezers. Scissors and nippers are immersed open so that the balls have access to the cutting parts.
6. Leave the tools for the time specified in the instructions for the device - from 5 to 40 seconds.
7. Use tools for their intended purpose immediately after removal.

Cleaning the device

Before cleaning, you need to double-check that the sterilizer is turned off. Only clean the housing surfaces, the outside of the lid and the container. After completing this procedure, you cannot immediately plug the device into the network.

1. To keep the ball device in proper condition, when cleaning it, do not use solvents, alcohol, or cleaning agents, the smallest particles of which can damage the housing.
2. To perform a gentle cleaning, you can use a detergent that does not contain any harmful chemicals.
3. Pick up a small cloth, which should not be made of cotton wool. You need to carefully moisten it in the solution and move it over the surface, trying to make sure that water does not get inside the device.
4. When all accessible areas have been wiped, you need to touch them again with a dry cloth so that no excess water remains.

If suddenly drops of detergent penetrated inside the flask, do not turn on the sterilizer for manicure instruments. To check its serviceability, you should contact the technical support center.

It is not without reason that the ball type of sterilizer has become so popular among craftsmen. It is very convenient to use without spending a lot of time on disinfection. In addition, such a ball device is simply necessary in beauty salons. Several people could serve customers much faster, since such a sterilizer very quickly and effectively removes harmful substances from all surfaces.

Common Questions

How often to change beads in a Glasperlene sterilizer

Replacement is carried out once a year or as the balls deteriorate. A signal that the contents need to be changed is when the color of the balls changes from transparent to yellow or becomes cloudy.

How much do sterilizer balls cost?

The price directly depends on the manufacturer and packaging volume. On average, 300 gr. balls cost from 150 to 400 rubles.

How many balls should I put in the device?

For stable operation, it is required to fill the container at least 2/3 of the way, leaving at least 1.5 cm from the edge of the bowl.

Rating of glasperlene sterilizers

Glasperlene sterilizers are practically the same from each other from a functional point of view, but may have different heating temperatures, appearance and prices.

TNL – 8th place

The body is made of high-strength plastic, which allows it to be used for a long time. Instrument sterilization time is 20 seconds:

• Production - Korea.
• Temperature – 200 degrees.
• The price of the device does not exceed 1000 rubles.

There is no registration certificate.

Tools sterilizer – 7th place

A budget device with a heating temperature of up to 250 degrees. The device takes 10-15 minutes to heat up.

Manufactured in China.

Advantages:

• low price - from 700 to 1200 rubles.

Among the shortcomings, most often the lid is not securely fastened. There is no registration certificate.

ABC IRISK – 6th place

The Russian-made device has a reasonable price - about 800 rubles. The body is made of durable plastic, and the flask is made of aluminum:

1. Production - Russia.
2. Temperature – up to 250 degrees.
3. Heating time to operational condition – 20 minutes.

Planet Nails, Macrostop – 5th place

The Chinese model Macrostop has a familiar design - a white plastic body and an aluminum bulb:

• The cost ranges from 2 to 2.5 thousand rubles.
• Heating to operating temperature – 20 minutes;

Advantages:

• sterilization time – 5-10 s.

There is no information on the registration certificate.

Tau Steril, Tau Quartz 500 – 4th place

The model from the Italian manufacturer heats up to 230 degrees and successfully copes with sterilization in 5-15 seconds:

1. The device comes with quartz glass balls..
2. Price – from 10 to 12 thousand rubles.

The Tau Quartz 500 model has a registration certificate from Roszdravnadzor, but it lists the device as a dry-heat sterilizer. In this regard, before purchasing, it is worth checking the possibility of using the device.

Ultratech SD-780 – 3rd place

The Ultratek SD-780 case is made of steel, is not susceptible to physical impact, and is durable. The filling balls provided in the kit are made of high-strength glass.

Temperature – 250 degrees.

Advantages:

1. A high-power heating element is used, which reduces heating time to 15 minutes.
2. Rubberized feet.
3. Automatic temperature maintenance during the working day.

Flaws:

• lack of a lid to close the flask . When left idle for a long time, dust settles on its surface.

The price for Ultratech ranges from 8 to 10 thousand rubles. , Russia.

Has a registration certificate from Roszdravnadzor.

OT12 – 2nd place

A sterilizer with a plastic body and an aluminum flask heats the balls to 290 degrees. Heating to operating temperature takes 10-15 minutes. Manufacturer of Silver Fox cosmetology equipment from Taiwan.

Advantages:

1. Automatic temperature maintenance system with light indication.
2. The temperature inside the device is displayed on the built-in screen.

Price – from 2.5 to 3.5 thousand rubles. There is no information on the registration certificate in the register.

Let's sum it up

Glasperlene (ball) sterilizer today is one of the best assistants in the field of cosmetology and dentistry, as it has two important advantages over other types of such devices - small dimensions and high speed of the processing process. It is up to the user to decide which model of device is best to choose, but first of all, one should decide on its scope of application, volume of operation and price. It is also equally important before purchasing to study several suitable sterilizers at once, compare their characteristics and read reviews. Generalized information on these criteria formed the basis for the rating of the best glasperlene sterilizers for 2022 compiled in this article.