Gel polish is rightfully considered the best nail polish. It gives your hands a beautiful, well-groomed look for a long time, while remaining resistant to chips and scratches. Women also prefer gel polish due to the huge selection of colors. Coating your nails with gel polish is a relatively inexpensive procedure available to every woman. You can save even more on nail care by performing this procedure at home.
Drying nails in a UV lamp
To do this, you will have to acquire all the necessary tools and carefully study the sequence of actions. The most important part of the procedure for covering nails with gel polish is drying. Proper drying of the varnish ensures the reliability and durability of the coating. In this regard, many women have a question: “How long does gel polish take to dry?”
Modern manicure technologies
Over the past few years, the chemical industry has invented various formulations that have been used to improve nail care and extend the life of the coating. In addition to classic manicure, modern women have the opportunity to choose more complex procedures with better results:
- Minx manicure - a thin film sticker is applied to the nails, which is fixed under the influence of the rays of a UV lamp while simultaneously being pressed onto the nail plate. Metal imitation films are mainly used for decoration. Today this technology is at the peak of popularity in Europe.
- Acrylic coating – the nail plate is covered with acrylic and decorated with modeling. This manicure lasts a long time and looks solemn.
- Permanent manicure – a thin layer of gel polish or biogel is applied to natural nails. This manicure lasts up to 2-3 weeks and looks neat. To perform it, additional tools are required: a base, a coating and a drying lamp.
What is a base
Base for gel and gel polish is, in other words, a corrective base used under gel polish or gel. According to classical technology, it is applied in a thin layer to previously cleaned and degreased nails or using drip technology to level the nail plate. The base has a transparent color and allows you to hide minor imperfections on the nail surface.
The base for gel and gel polish is designed to give greater durability to the gel coating and strengthen the nail plates themselves. By the way, the bases of some manufacturers contain medicinal components that help improve their structure. The service life of the manicure directly depends on the quality of the base.
Benefits of using the database
Using the database provides certain advantages:
- Durability of manicure. The base for gel and gel polish ensures the durability of any gel coating for up to 3 weeks. Manicure can withstand any mechanical and chemical influences.
- Thanks to its thick texture, the base is excellent for shaping. It allows you to build up broken corners.
- The base easily lays on the nail plate and fills all the unevenness. The nail acquires an ideal shape and a mirror shine.
- The nail plate is not only leveled, but also becomes stronger. The texture of the base replaces biogel.
For your information, all masters always use a base for gel polishes. Among experts, this product is considered mandatory in the gel coating process.
Is it possible to dry extension gel in an ice lamp?
UV lamps
They are inexpensive, but
they dry
longer
You can dry
not only
gel
in them , but also
gel
for extensions.
LED lamps dry
only gel
polish
(
drying
is
carried out within 5-30 seconds).
Hybrid lamps
combine
both
UV and
LED
lamps.
Quickly polarizes gel
polishes and
nail extension gels
Cosmetics Kodi Professional
Among the many companies producing nail care products, one of the first places is occupied by the American brand Cody Professional. This company produces professional cosmetics and tools for various types of manicure. Many craftsmen use only products of this brand in their daily work because of their high quality. The advantage of Kodi Professional materials is their ease of use. The products of this brand can significantly reduce the time of all stages of manicure and simplify the work of the master.
Kodi Professional cosmetics can be used both for professional manicure and at home. Materials of the named brand are presented in various online stores and in salons selling nail cosmetics.
How to apply Kodi Acid Free Primer?
Dial an acid-free primer
in a small amount, squeeze out the excess on the edge of the bottle. Apply the brush to the center of the nail and allow the product to spread evenly throughout the entire nail. Adjust the resulting coating without allowing it to come into contact with the skin. In case of contact with the epidermis, rinse with running water.
Interesting materials:
How to see messages that a VK interlocutor has deleted? How to remove shellac from nails at home? How to remove an ear plug at home? How to remove Yandex bar in Google Chrome? How to delete recently closed tabs in Chrome? How to delete a message from a conversation on Skype? How to delete a deleted message in Skype? How to delete contacts in Telegram? How can I get back what I deleted from the trash? How to get a deleted character back in The Sims 4?
Rubber base
For manicures with gel coating, it produces a professional base - Rubber Base Gel. This is a transparent base of a unique composition that can be used under different gel polishes.
The rubber base for gel polish promotes uniform coverage of nails with colored varnish and makes it durable. The rubber base significantly extends the life of the manicure and prevents peeling of the coating. Gel polish lasts up to 20 days.
The rubber base for gel polish from the Cody Professional brand is available in bottles of 7.14 and 30 ml. There is a small brush inside the lid for applying the product.
For an ideal result, it is recommended to use the entire Kodi Professional series, which consists of a base, gel polishes and coating.
In summary, here are the advantages of the Kodi Rubber Base:
- super durability;
- no unpleasant odor;
- safe composition;
- strengthening effect on the nail plate;
- does not cause allergies;
- after polymerization it acquires a beautiful shine;
- fits easily;
- Can be used even on brittle nails.
How long does the KODI base cover?
But it will be more difficult for us to answer this question unambiguously, so as not to mislead the master with exact numbers. Material consumption always depends on the factors that we have already discussed: the length and area of the nail plate, as well as the density of the base coat. But we know for sure that the craftsmen always have a new, unopened bottle of Kodi rubber base in their desk, so they certainly won’t be caught off guard by the fact that the base suddenly runs out. Of course, the base in the coating decides a lot, but the role of the Cody rubber top in the system should not be underestimated either. After all, the persistent gloss of the top throughout the entire period of wear always pleases the client, and the finishing coating itself protects the pigment from fading and yellowing. But what if after removing the dispersion layer the shine goes away? Let's look at the reasons.
Application technology
But in order for gel polish to last a long time and maintain a beautiful appearance, it is important not only to use high-quality materials, but also to follow a certain technology. Applying the base should consist of the following steps:
- Cleaning your nails. It is necessary to remove the previous coating, remove cuticles and dead tissue.
- Use a buff to remove shine from the nail plates. Their edges and areas near the cuticle should be treated especially carefully.
- Give the nails the desired shape, file the edges and clean out external defects.
- Treat with a degreaser.
- Cover each nail with an acid-free primer and leave for 20-30 seconds to dry. The primer strengthens the adhesion of the nail plate to the base.
- Apply the base in a thin, even layer, avoiding contact with cuticles and skin. The edge of the nail should be sealed.
- Dry the applied base under an ultraviolet lamp. In this case, the Kodi Professional base must be dried for 2 minutes at a power of 36 W.
After this, you can apply other manicure products to your nails, decorate with stones or draw colored patterns.
Allergy to Kodi gel polish, and what to do then
Since gel polish is the product of chemical production, an allergic reaction to it is not excluded. In this case, two types of allergies can develop:
- contact allergic reaction;
- respiratory allergic reaction.
The first type of allergy can occur if, during a manicure procedure, gel polish gets on the periungual skin. If you do not pay attention to this and continue the procedure due to inexperience, then with each new stage a new layer of chemical substance will fall on the skin. The skin of a person who is susceptible to this kind of allergy will, of course, react to the irritant and show some signs.
Symptoms of contact allergies
- redness of the skin;
- blistering;
- rash formation;
- dryness and flaking of the skin;
- itching and burning sensation;
- peeling of nails.
The second type of allergic reaction is possible if you were too close for a long time and could inhale gel polish vapors.
Respiratory Allergy Symptoms
- the appearance of swelling and redness of the eyes;
- the formation of increased lacrimation;
- constant sore throat, sneezing, cough;
- formation of nasal mucous discharge;
- palpable heaviness of breathing.
Possible treatment for allergic reactions to gel polish
- If you notice any allergy symptoms, you should immediately remove the gel polish from your fingernails and toenails.
- Every day, three times a day, treat your hands or feet (depending on where the reaction originated) with nourishing creams.
- Be sure to take herbal baths for the first three days. You can use chamomile, calendula, rose, sea buckthorn and so on. If you have special nourishing oils for your hands, you can add them to the bath.
- Under no circumstances use any type of varnish until complete recovery.
- To quickly eliminate the effects of allergies, buy and use essential oils containing vitamins A, E and glycerin.
- If symptoms persist or your nail plates are peeling, consult a doctor immediately and do not self-medicate.
Bluesky Products
Another popular brand of nail care cosmetics is Bluesky. The gel, base and coating of this brand are produced by a large Chinese company under a registered trademark. Bluesky products are of good quality and are sold in many countries around the world. The manufacturer guarantees the durability of the manicure for up to 14 days.
All Bluesky products are safe for health and meet European quality standards. In many respects, the products of this brand are not inferior to the best American analogues.
The most popular among buyers is Bluesky gel polish. The base perfectly evens out the nails and also protects them from the pigment effects of colored varnishes. The manicure looks attractive and neat.
The company also produces a 2 in 1 product - base and top in one bottle. It can be used as a base for gel polish and coated nails at the finishing stage. Baze+Top Bluesky securely sets the gel coating.
Why does Cody's top bubble?
When covering with a finishing topcoat, craftsmen often encounter that the material bubbles. There is an explanation for this phenomenon. The fact is that the topcoat for gel polish is more liquid in texture than the base and even the color. You also need to be able to cover the top evenly without bleeding, but you must admit that the master spends much less time working with the finish than with the base and color. Frequent movements of the brush in the bottle with a liquid texture and an insufficiently wide neck of the bottle contribute to its airiness. Small bubbles trail behind the brush and interfere with the artist’s work. To solve this problem, follow two simple tips:
- To get a drop of topcoat onto the brush, you need one light stroke of the brush in the bottle, without additional ones, which contribute to the injection of air.
- If the top still becomes airy, simply open the bottle and, without removing the brush from the bottle, leave it in a dark place for 4-5 hours. The air will come out of the bottle and the problem will be solved.
We hope that in this article we answered the question “What is the base and top of KODI.” We are grateful to every buyer, client, master, student, each of you for choosing Kodi Professional brand products. We are improving every day to become even better for you in every aspect.
Features of applying Bluesky Base Rubber
Bluesky rubber base should be applied in a thin layer, covering the entire surface of the nail plate. Places with noticeable external damage can be covered with a thicker layer of base. It fills in all the unevenness and gives your nails a perfect look. After application, the base must be dried under a 36 W LED or UV lamp.
It is important that it does not come into contact with the skin, otherwise the gel coating will peel off. The base should be applied carefully, sealing the tips of the nails. And if you follow the instructions and recommendations of the manufacturer, gel polish applied to the Bluesky base can last up to 3 weeks.
Why doesn't Cody's top shine?
- It is important not to overdry the topcoat: the polymerization time of the Kodi rubber top coat in an LED lamp is 30-40 seconds, in a UV lamp – 2 minutes. This is especially true for tops for dark gel polish colors without a UV filter, in particular Miracle Rubber Top. When using such finishing tops, it is important to monitor the polymerization time, since otherwise the top will lose its shine and it will not be possible to revive it.
- Be sure to monitor the power of your lamps. If you have a powerful LED lamp that has not reached the end of its operating time, if you change the replaceable elements in your UV lamp on time, then this time is enough for the top to dry well. If your lamp has already worked for a certain time, you can increase the polymerization time to one minute in an ice lamp and up to 3 minutes in an ultraviolet lamp. If you follow all the recommendations that we will write about below, but the top still does not shine, there is only one conclusion: it’s time to part with the old ice lamp or replace the replacement bulbs in the ultraviolet. An under-dried top is the main sign that will help you understand this.
- Allow time for the topcoat to cool before removing the dispersion layer. This will provide the coating with a lasting gloss. I like to use the example of molten glass: you can blow different shapes while the glass is hot, leave matte marks on the surface while it cools, but once the glass has cooled, you are guaranteed a bright and long-lasting gloss.
- To remove the dispersion layer, we recommend using only special products that, due to their composition, provide the coating with an ideal shine. By following these tips, you will provide your client with a coating whose dazzling shine will delight him for a long time.
