What is and why do you need flowing gel polish? Base for spreading gel polishes: how to work? Watercolor, flowing gel polishes and nail designs with them. Blossom gel on Aliexpress

Design using wet gel polish is drawing on an undried coating, which allows you to make the image more natural due to the fuzziness and vagueness of the lines.

It requires flower beds of medium density, as well as a choice of thin, flat, beveled brushes, dots, toothpicks, and needles. There are also special products with a spreading effect from Nika Nagel, BlueSky, Gellaktic Mystic, MiiS. You can make beautiful patterns, abstract images, dots, cobwebs, twigs, shells, hearts. Drawing roses, butterflies, reptile skin, feathers, marble surfaces, and a bridal bouquet will require more skill.

Design features for wet gel polish

A wet gel polish design is an image, pattern or vague shapes that look as natural as possible. The technique itself gives them greater naturalness, because the wet coating makes all the lines a little fuzzy. To get the desired effect you need:

• choose a gel polish of medium consistency so that it does not spread instantly and at the same time easily mixes with other flower beds;
• use a suitable tool, because the details of the drawing can be larger or smaller.

Which varnish is best

For a vague design, it is important to choose the right gel polish:

• Well pigmented. If the flower garden leaves streaks, you will have to deal with them. Otherwise, the drawing will look sloppy.
• Correct consistency. A product that is too liquid will spread, may flow onto the cuticle or mix so that vague spots appear instead of a pattern. And thick textures do not mix well; soft transitions will not work.

If the gel polish is too viscous, it can be diluted with a liquid finishing agent.

How to apply drawings

Drawings are made:

• with a thin hair brush or liner,
• dotsami,
• a brush from a bottle of gel polish,
• orange stick,
• toothpick or needle,
• point brush, petal brush, beveled or flat.

The tool is chosen in accordance with the design and for reasons of convenience. Brushes are suitable with natural and synthetic bristles, even silicone ones. The main thing is that the gel polish does not slide off the instrument instantly.

Spreading blossom gel polish on Aliexpress

Now almost every line of gel polish manufacturers has a similar spreading base. They are also sold on Aliexpress, and there are a huge number of them.

Flowing gel polishes on Aliexpress can be found here .

Review of the best spreaders on Aliexpress:

1. One of the most famous is the spreading base Modelones. The fact is that it differs significantly from all the others in its viscosity. It is very thick, resembling rubber. During the initial coating, doubts arise as to whether the varnishes on this base will really spread. But the base actually works very well. The main advantage is that it does not flow into the area of ​​the side ridges and cuticles and the design remains only on the nails, avoiding contact with the skin. This greatly simplifies the work of the manicurist and reduces the likelihood of streaks. Very high quality products at a low price.

   
   Modelones

2. Born Pretty . Unlike the previous manufacturer, this base is sold together with gel polishes. You will have to buy several primary colors that you are going to paint on. The cost of varnishes is in the middle price category. Buyers note high efficiency and speed of spreading. Accordingly, working with such varnishes requires skills, because you may simply not have time to draw a pattern in time and place your hand in the lamp. The product is quite thick and does not flow into the area of ​​the side rollers and cuticles. Born Pretty
3. Saviland. This brand does not offer watercolor gel polishes, but a base. One of them is transparent, and the second is white. You can use any suitable gel polish to apply the base, on top of which you will use a thin layer of base to spread. Even a non-special product will do. Please note that the brand is inexpensive, but the product itself is quite liquid, which is ideal for experienced professionals. If you are working slowly with bleeding gel polishes, it is better to choose a thicker base for spreading. You may not have time to apply everything the way you want, as a result of which the drawn details will have varying degrees of spreading and blurring.

   
   Saviland

View the database catalog here

Possible mistakes when creating nail designs using wet gel polish

Nail design using wet gel polish is also accessible to beginners, but difficulties may arise when performing due to:

• Wrong choice of flower garden. Too liquid and dense are not suitable. And to avoid unpleasant surprises when mixing, it is better to take products from one company.
• Poor quality manicure, errors in applying the base and the first layer of the flower garden. All this can create unevenness on the nail plate, which will interfere with the distribution of gel polish over the general background.
• Uncertain, repetitive or too intense movements of the instrument. This causes bald spots to form on a wet surface, rather than clear lines that should blur slightly.

There are many other factors that prevent you from doing the job beautifully and quickly: incorrect position of the hands (upside down), excessive tension, poor lighting, etc.

Wet gel polish drawings that beginners can do

Drawings using wet gel polish for beginners should be simple:

• smooth divorces,
• different sizes of dots or circles,
• abstract images,
• cobweb,
• simple ornament,
• hearts, shells, and other easy-to-make figures.

And it’s better to sketch out in advance on a piece of paper what you would like to have on your nails. This makes it possible to think through the movements of the tool in advance and determine the location of the parts.

Step by step drawing on wet gel polish is done like this:

1. The nails are filed, the cuticle is cut or pushed back, and the skin around the plates is polished.
2. Surfaces are treated with a buff to remove gloss.
3. Nails and skin are wiped with a degreaser.
4. After it evaporates, a primer is applied to the surfaces of the plates and ends, and allowed to air dry.
5. The next stage of the gel polish base is its polymerization.
6. Nails are painted with the first layer of flower garden.

7. This coating must be dried and residual stickiness, if any, must not be removed.
8. Apply another layer of gel polish of the main shade, do not polymerize.
9. The second flower bed is laid out as a drop on the palette.
10. By dipping a dots or other tool into it, they apply patterns to the undried layer of gel polish on the nails.

11. The hand is placed in the lamp.
12. Cover the nails with a finishing agent and polymerize it.

Divorces

Divorces can be done using 2 or 3-4 flower beds plus the main background, and there are 2 ways to do this. The first one is done like this:

1. The prepared nails are covered with a base and dried.
2. Apply 2 layers of the same color, leaving the second undried.
3. Gel polishes of other shades are dripped onto the foil or palette separately from each other.
4. Take each one in turn with thin brushes and use them to make lines on the nail along the undried base color.
5. When the design takes on the desired appearance, the coating is polymerized.
6. All that remains is to apply the top coat and dry it too.

Watch the video about design options for wet gel polish:

The second method is more difficult, but the divorces are more natural:

1. The base is applied to prepared nails without leveling, so that in the end they do not look too thick.
2. Cover them with the main color and dry.
3. Additional shades of gel polishes are dripped onto each other onto the palette and mixed with a thin brush or dot until streaks appear.
4. Using a wide brush, pick up this mass and transfer it to the nail, stretch it from the base to the free edge, without disturbing the formed lines.
5. The same is done on the side parts of the plate.
6. Use a thin brush to paint the space around the cuticle.
7. Dry the coating.
8. Next you need to apply the top coat and place your finger in the lamp.

With this method, you don’t have to paint the nail with the main color, but apply stains directly onto the dried base, because they will cover the entire surface. If such a technique seems difficult, stage 2 is not skipped. But stains from the palette are applied to part of the nail. And then they level the gel polish with a thin brush so that it does not lie in a lump.

Dots, circles

The dot pattern is one of the simplest, you just need to follow a few rules:

• The second and subsequent shades of the flower garden are dripped onto the palette so that they do not mix.
• From there they are taken with dots; you can use different sizes of tools.
• If the first gel polish is not dried on the nail, they leave marks on the surface of the second and subsequent flower beds.

• Decorate the entire plate or part.
• To make the dots of different diameters, apply several pieces of gel polish with one portion until it runs out.
• Immediately after application, the circles blur, so there must be a certain distance between them, otherwise the entire decor will merge into spots.

When the pattern is completed, it is dried and covered with topcoat. The dots can be made of the same shade or different.

Abstraction

An abstract image is beautiful because of its uniqueness, because you won’t be able to make exactly the same thing again. This design is done as follows:

1. Drops of gel polish of different colors are placed next to each other on the palette so that one flows into the other.
2. After preparation, the nails are covered with the main background and dried.
3. Paint them again with the same color.
4. Using a comb brush or other flat brush, scoop gel polishes from the palette, like a spatula.
   Read also:  How to remove rough skin on your heels yourself? And what is the best way to do this: pumice, a file, a laser grater?
5. Transfer them to the nail slowly, making a broken line in one movement.
6. You can turn the brush over and walk it next to the already applied stripe.

7. If bubbles have formed on the surface due to the large thickness of the gel polish layer, they are removed with a tool with clean bristles.
8. The abstractions are allowed to spread a little more for a couple of seconds and the finger is sent into the lamp.
9. The top of the nail is covered with topcoat and it is also polymerized.

For abstraction, you should use at least 3 shades - contrasting and intermediate.

Patterns with cobwebs, twigs

Patterns in the form of a cobweb and a branchy ornament are very relevant this season and are easy to do:

• In the first case, 3 thin stripes are applied along the nail along the wet base gel polish. They should be parallel to each other, and their edges should be at a short distance from the end and cuticle. Using a toothpick or a needle, transverse lines are drawn from these strips at different levels in both directions so that they form a circle consisting of broken segments. This is how a web turns out.
• The branches begin to be drawn from points that are scattered quite far from each other. Using a needle or toothpick, they are pulled out to form leaves and connected to form stems. You can use different shades of gel polish.

Hearts, shells

To draw a shell, dots are placed on the nail plate so that they form a circle. Inside it you need another circle - a small one. It is pulled out with a thin brush so that you get a blot with uneven edges. It is necessary to connect this element with a large circle with thin lines. And also draw segments between the points that make up the outer circle.

The heart is drawn based on several marks made with a dots or a thin brush:

• one in the middle of the plate,
• two on each side of her and above,
• another point located below the central one.

The first mark is connected to those above with smooth lines. Curved stripes are drawn from the paired lateral points to the lowest one.

The heart can be made from circles. Use 2-3 shades of gel polish, place large and small dots with them so that overall they form the intended figure.

Pros and cons of coatings with a spreading effect.

The demand and popularity of watercolor gel polishes is due to their truly unlimited possibilities for creativity. Manicurists emphasize such advantages
as:

• Particularly convenient in creating new unique colors by mixing.

“Watercolor shine” coatings are not only ideally combined with each other, but are also completely suitable for combination with the basic “Watercolor” collection. You will no longer have to worry about whether the textures match each other, whether it will be convenient to paint with a new, mixed color, and whether the watercolor drawing will turn yellow when exposed to light or become covered with cracks in the sock.

• very beautiful, graceful and attractive visual effect.

After spreading, the drawing retains brightness, clarity and saturation at the edges of the contour, while towards the middle of an element a blurred effect (haze, veil) is obtained. That is, a kind of light gradient is created, due to which the watercolor manicure gains volume, while maintaining a special femininity and lightness.

• With watercolor gel polishes it is simply impossible to create something stylistically inexpressive.

Even chaotic dots overlapping each other, due to spreading, create the feeling of a “multi-layered fabric”, attractive with the radiance of bright natural colors.

• You don’t need a large arsenal of brushes to create images like those from artists’ paintings.

You can work either with a brush from the gel polish itself or use thin brushes (straight or beveled, depending on what kind of pattern you are creating).

• aqua shellacs do not necessarily require additional decoration with rhinestones, glitter or broths.

Of course, decorative elements can appropriately complement the manicure in accordance with the idea. However, if you have a strict dress code at work, or you just don't like complex nail design ideas that spread to the effect of colored muslin, gel polishes are a great choice.

• huge variety of designs.

Since the textural features allow you to save a little time when creating a manicure, you can, without fear of making a mistake, slowly practice drawing pictures, various types of painted designs and monograms. This gel polish will not run under the cuticle or onto the side ridges, but will allow you to correct (paint on) the element the way you want (while it blurs). The lines of the drawing are soft, smooth, with chic light-and-shadow transitions;

• speed of work on creating and deleting an image.

The minimum time to create a manicure with a spreading effect is 30 minutes. Using any gel polish remover (or a coating remover), the design can be removed from the nail in just 10 minutes!

As for possible disadvantages

, that is:

• the need to purchase a special base (from Irisk this is the Wet Gel Polish base - white, black and transparent), without it the spreading effect will not work at all;
• You can’t get a full coverage with these gel polishes, as they are mostly decorative. However, you can create a multi-colored marble effect by layering complimentary colors;
• These gel polishes must be stored and used in compliance with all the rules for handling shellac products, since it is undesirable to dilute them with topcoat if there is a hint of thickening, or even with exactly the same new gel polish. Since the half-haze effect will no longer be the same as it was originally intended. And experiments with resuscitation will not have the best effect on the wearing time;
• since space is needed for spreading, such gel polishes will certainly give greater scope for creativity on long nails;
• Unlike collections of classic gel polishes, new products are not so numerous quantitatively. Which, however, is an additional reason to experiment with mixing colors together.

How to correctly create a long-lasting manicure with watercolor gel polishes that attracts attention with its beauty and emphasizes the beauty of your nails (both natural and extended)?

Wet gel polish design: patterns for experienced craftsmen

Design schemes for wet gel polish can be more complicated, but they can only be completed with the ability to draw and sufficient practice in nail art:

• roses and other flowers,
• several small butterflies or 1 large one covering the entire plate,
• imitation reptile skin,
• feathers,
• marble texture,
• the bride's bouquet.

Roses

Roses are painted on a damp surface with a thin brush. First, a dot is placed in the center of the future flower.

Short, arched strokes are made around it, moving further and further from the middle. For greater naturalness, these lines should be of different thicknesses and lengths. They become thinner towards the ends.

For roses, choose a background that is lighter or darker than the flowers themselves. You can draw several small ones or 1 large one on the entire nail plate. Here, 2 gel polishes are enough - for the main background and the flower itself. But you can also use 3.

One covers the entire nail, the other is used as the main color of the rose, and the third draws the edges of its petals. That is, a stain is made on the dried base shade with another gel polish. And while it is wet, the third color is used to outline the petals. The last shade should be darker than the previous two.

You can additionally decorate roses with rhinestones, sparkles or acrylic powder to get velvet flowers. In the latter case, the top is not applied to these areas.

Painting with butterflies

Painting with butterflies is performed in the following sequence:

1. Draw 3 intersecting lines. The central (shorter) one will be the basis for the body of the insect. Through a point just below its middle, 2 other lines are drawn so that the entire structure resembles the letter Z.
2. Using a thin brush, a stroke is made from the side strips to create the outlines of the wings. The top ones should be larger than the bottom ones.
3. Inside the wings you can make another outline, but in a different color. The body, along with the tail and mustache, is drawn in black or dark gray.
4. You can add dots and irregular multi-colored spots inside the wings. Or paint these parts with one color. And along it make thin black lines from the insect’s body to the edges of the wings.

You can draw several of these butterflies on 1 nail. To simplify the task, use a bright general background and only 1 gel polish to outline the image.

How to Draw Reptile Skin

Drawing snake or crocodile skin is quite simple, since the main thing here is maintaining the distance between the elements. Dots are placed on the nail so that when they spread, they do not merge. First, perform 1 vertical row in the middle of the nail. Then they make adjacent ones, but put points at the level of the spaces between the parts of the first line. Thin partitions should form between the spots.

Watch the video on how to paint reptile skin using wet gel polish:

To make “reptile skin” look as natural as possible and seem textured, choose similar colors of gel polish. For example, if the main shade is blue, the dots are made blue. You can also outline the lines separating the spots with gold or silver paint. But this is done after drying.

Technique for drawing a butterfly

To depict a large butterfly, a different technique than mentioned earlier can be used:

• Drawing a silhouette of an insect in profile, covering almost the entire nail. It looks like the number 9, but completely shaded. Use black gel polish over undried light gel polish. And on a dark background with a thin brush they draw colored narrow lines and spots.
• Drawing with five colors that smoothly flow into each other. The main shade depicts an insect with outstretched wings. It looks like the number 9 and its mirror image. The inside of the image is outlined with a different color, then with a third color. The remaining shades are used to draw small details - dots, spots, lines.

Feathers

There are two ways to depict a feather:

• Place dots at a certain distance from each other and circle each one with several colors of gel polish to create multicolor circles. They are connected to each other by making movements from one to another with a dry thin brush. It is also used to make short strokes from the edges of each circle. The result is a multi-colored peacock feather.
• Drops of gel polish are placed along the nail on a damp surface so that they form a curved line. The size of the spots spreading from them should gradually decrease. A thin dry brush is drawn along this row to depict the shaft of the feather. Use the same tool to stretch the edges of the spots. For this scheme, you can use several colors of gel polish or just one.

Marble

Marble coating is done as follows:

1. Nails are painted with light gel polish in 2 layers and both are dried.

2. Then a liquid finish is applied.
3. Black gel polish and thick top coat are mixed on the palette.
4. This product is applied to a thin brush and used to make uneven, winding lines along the wet finish on the nail.
5. They are combined in some places, shaded in other areas.
6. When the pattern looks like marble, it is dried, coated with topcoat and polymerized again.

For the desired effect, you always need a light main background and a darker color to draw the veins.

The bride's bouquet

The composition “bridal bouquet” is made in pastel colors:

1. On a damp base coat (pink, beige or white) paint 3 abstract spots with outlines similar to flowers. They must lie on line 1.
2. After polymerization, flower leaves are painted on with silver gel polish. You can also use light green.
3. The coating is dried again. Then the edges of the petals are painted with white gel polish, as in the image of a rose, as well as the veins on the leaves.
4. All that remains is to cover everything with topcoat and polymerize it. For flowers you can use a matte finish, for the rest of the surface of the nail - glossy.

How to remove artificial material correctly and why is it important?

You've probably heard that gel polish spoils your nails, making them thin and brittle. It is a myth! It's not the material that ruins your nails! One of the reasons for damage to the nail plate is improper removal of the artificial coating, so this procedure must be approached with special responsibility!

Is it possible to remove gel polish yourself at home without damaging your nails? What materials and tools are needed for this? Let's figure it out.

How long can you wear gel polish?

First, let's figure out what period of wearing the coating is optimal. Often girls wear gel polish for a month, or even longer. However, they do not understand that they can damage the nail plate.

Technologists advise walking with the coating for no more than 2-3 weeks. Prolonged wear puts stress on the tip of the nail plate, its root suffers from the weight of the coating. All this can lead not only to breakage, but also to deformation of the nail plate.

How can you not remove gel polish?

RULE 1: Under no circumstances should you pick at the gel polish or tear it off the surface of the nail plate, because this can cause serious injury! If you are careless, you can remove the top layer of the nail along with the material, and this can lead to thinning and, at a minimum, painful sensations when in contact with water and various surfaces.

RULE 2: do not file away partially peeled off gel polish. In this case, you also risk cutting off the top layer of the nail and ruining it.

What other consequences might arise?

• There is a possibility of tearing not only the gel polish from the nail, but also the nail plate from the nail bed.
• You peel off the artificial coating, and the nail plate becomes thinner and thinner each time.
• Those with thin nails may feel unbearable pain during coating - the base will burn strongly in the lamp. They can also get a burn to the nail plate, which in turn can lead to onycholysis - separation of the nail plate from the nail bed. It will take quite a long time to treat onycholysis.
• You will have to strengthen the nail plate, and this will require additional time for the manicure procedure.
• You will have to buy materials to strengthen the nail plate: acrylic powder, gel or polygel. And these are additional financial expenses.
• Thin nails become mobile and weak, so the coating may be worn less than usual. You will have to try very hard to avoid detachments and chips.

We hope these reasons are enough to convince you not to peel off the coating from the nail plate and do the gel polish removal according to the rules!

By the way, the peeling process itself is quite painful, it’s hardly worth it!

What are the mistakes when painting on wet gel polish?

Painting on wet gel polish fails for several reasons:

• Incorrect base application. If it lies in lumps, a flower bed applied to a wet coating may flow in the wrong place.
• Air bubbles at the base of the nail. This happens when a manicure is of poor quality, when the cuticle is unevenly cut or not pushed back enough. The same problem as in the previous case is possible.
• Incompatibility of the means used. First of all, these are gel polishes, which are chosen for the general background and for painting on it. They may mix poorly, leak or shrink, and the design will not come out.
• Insufficient drying of the design. With some of them, there is a lot of material on the nail, and the standard 2 minutes in a UV lamp or 30 seconds in an LED lamp is not enough. The design lags behind the nails, despite the presence of a topcoat on top.

Tips for beginners

To get the design right the first time, you should use the secrets of experienced craftsmen:

• All movements and brush strokes must be clear. There is no need to carry the tool several times over the same place, this will lead to the appearance of bald spots.
• If the stains seem unsightly, they can be corrected. To do this, take a dry and clean brush, and wipe the bristles on a napkin from time to time.
• To make the design more expressive, you can use glitter gel polish where appropriate. It is also used to paint the contours of individual parts.
• It is important that nail art is performed on well-prepared nails. No drawing will hide the “shaggy” cuticle and irregular shape, bumps and depressions on the surface.

New and popular gel polish coatings

Today it is difficult to surprise anyone with a classic manicure. But all of us girls love attention from the outside and catch the admiring glances of others. That’s why, when going to a nail salon, we carefully consider all possible options for designing our favorite nails. Today, nail technicians can offer many interesting techniques.

In terms of price, all coatings can be divided into economy options up to 500 rubles. for home use and materials for professional use in salons and home studios, the cost of which will be higher.

Let's look at the most popular types of UV coatings and the latest fashionable gel polish colors.

Gel polish “Cat's eye”

You can create a beautiful and effective design using cat eye gel polish. Possessing a special formula that includes the smallest metallized particles, cat eye gel polish on nails allows you to get an interesting pattern that imitates the pattern of a gemstone of the same name. The design is created using a special magnet, which is always sold together with varnish. Metal particles, under the influence of magnetic waves, form the necessary pattern.

The most popular brands of magnetic gel polishes: KODI, FOX, LiaNail, Bluesky, InGarden, Masura, TNL, Ell lourel, Irisk, Vogue Nails, etc.

SECRETS AND FEATURES OF USE

• Nail preparation : leveling the nail plate and applying a base;
• Covering your nails with black gel polish : if you want to get a clearer highlight effect, then it’s better to apply the “cat’s eye” over black polish, but you can do without it.
• Preparation of magnetic gel polish : it is recommended to shake the contents of the bottle with magnetic varnish well and mix;
• Application and creation of effect : it is recommended to apply the material in two layers (you can put a highlight on the first one, or you don’t have to). The most comfortable distance from the surface of the nail to the magnet when placing a highlight is approximately 5-6 mm.
• Fixing the result : the manicure is fixed, as usual, with a top coat.

Cat eye designs are often combined with rhinestones, vintage designs, lace and matte tops and foils. Stained glass decor is also in fashion now.

CHARACTERISTICS OF MAGNETIC VARNISHES OF POPULAR BRANDS

CAT EYE DESIGN OPTIONS

New: cat's eye and stained glass pattern.

Another new product: cat's eye on wet (drops and brush drawing).

Fashion design: cat eye with inlay.

Classic: matte cat eye.

Single-phase gel polish

Single-phase gel polish is a very convenient option for creating a beautiful manicure at home. Unlike conventional products, 3 in 1 gel polish has an innovative formula, due to which there is no need to apply a base and top coat.

The most popular brands of 3 in 1 coatings: TNL, Bluesky, Nailico, Patrisa Nail, Joy, ruNail, etc.

FEATURES OF USE

No subtleties or secrets. The coating is a universal 3 in 1, so the number of manipulations when creating a manicure is kept to a minimum:

• Nail preparation : buffing and degreasing;
• Application : cover nails with 2-3 layers of gel polish;
• Final stage : removing stickiness if necessary.

These coatings have one feature. Because If you do not use a top coat during the manicure process, your nails will not be as shiny as with a classic manicure.

Thermo gel polish

Not so long ago, the attention of fashionistas was attracted by a new product - thermal gel polish, which changes color depending on the temperature. The coating looks especially interesting on long nails. It reacts not only to the ambient temperature, but also to the temperature of the nails themselves.

The most popular brands of thermal coatings: TNL, Masura, Bluesky, Vogue Nails, Patrisa Nail, Vera Nail, FOX, KODI, etc.

OPERATING TECHNOLOGY

The stages of applying thermal coating are no different from a regular manicure:

• Nail preparation : light sanding, treatment with degreaser;
• Application : Usually 2 coats of color are required;
• Consolidation of the result : top and removal of stickiness

When choosing a material for work, carefully read the instructions on the bottle. The temperature range at which the coating on the nails changes color is very important (it should not be too wide).

THERMO MANICURE OPTIONS

Thermal coating gives an interesting effect of transition from one color to another at the tips of the nails. It turns out a gradient jacket.

Matte gel polish

Matte gel polish is a stylish and interesting coating option that does not give a glossy shine when dry. It is used to create various designs. Combines perfectly with glossy gel polishes.

Popular brands of matte coatings: Masura, LoveEasy, etc.

APPLICATION FEATURES

Matte varnish is usually single-phase (3 in 1) and is very easy to apply.

• Preparation : before application, you only need to properly prepare the nail plate using a buff and degreaser (in addition, you can use a primer);
• Application: as a rule, 2 layers of gel polish are required to achieve a rich color;
• Final stage : no need to use top, you just need to remove the stickiness.

Single-phase varnishes are very convenient to use, but some of them last only a short time. In this regard, nail designers prefer to do a classic manicure with gel polish using a matte top coat.

POPULAR DESIGN OPTIONS

The simplest and most beautiful manicure options with a matte UV coating for nails: French manicure and droplets on the nails.

Stained glass gel polish: transparent glass coating

Another option that will help you create an original manicure is stained glass gel polish. With its help you can create amazingly beautiful designs: “broken glass”, liquid stones, aquarium nails. Gel polishes have a translucent texture. Therefore, if it is necessary to achieve a more intense effect, stained glass gel varnishes are applied in several layers.

The most popular brands of stained glass gel polishes: Vogue Nails, Bluesky, Kodi, Irisk, TNL, BDNail, etc.

APPLICATION

This coating is used to create a decorative effect.

• Nail preparation : includes polishing, cleaning, degreasing nails, applying a base coat;
• Application of color : coating of nails with 2 layers of colored gel polish;
• Creating an effect : applying stained glass coating (can be used for decoration);
• Consolidation of the result : top.

Stained glass enhances the effect of a cat's eye if you choose coverings to match. Also, varnish with a stained glass effect is used for nail designs with foil, with diamonds, with sparkles, with broken glass, and what’s more, you can draw patterns with “stained glass.”

MANICURE DESIGN OPTIONS

New: enhancing the cat's eye effect with stained glass.

More new designs: stained glass covering with diamonds and broken glass

Stained glass coating on foil

Gel polish chameleon

Fans of thermal varnishes will definitely appreciate another new product – gel varnishes with a chameleon effect. They contain special particles that react to changes in temperature and light. Many manufacturers add pearlescent chips to their products, making the coating truly shine. This effect looks especially luxurious on long nails.

Popular brands of chameleon effect coatings: TNL, KODI, CANNI, BDNail, Patrisa Nail, RuNail, etc.

HOW TO USE

Chameleon coatings are applied according to the standard scheme:

• Preparation : standard using base
• Application : 2 layers of color coating
• Fastening : top.

Chameleon is often used as a decorative finish, for example to create abstract designs on nails or an ombre effect.

MANICURE OPTIONS WITH CHAMELEON EFFECT

Chameleon coating is ideal for creating abstract and cosmic designs.

Gel polish with glitter

You can get a spectacular shiny manicure using glitter gel polish, and they can be of different sizes and shapes. Glitter gel polish can be combined with a colored coating to create a bright and unusual design.

Popular brands: TNL, OPI, Entity, Bluesky, In'Garden, MASURA, IRISK, Haruyama, Patrisa Nail, etc.

HOW TO USE

Coatings are applied according to the classical scheme:

• Preparation : base coat;
• Application : 2-3 layers of color;
• Fastening : top.

Shiny coatings allow you to create a simple and at the same time interesting manicure in the Feng Shui style.

MANICURE OPTIONS WITH GLITTERS

Mirror gel polish

Not long ago, a mirror gel polish appeared on the market, which allows you to get a perfectly smooth and shiny surface. Silver and golden shades are especially popular. It contains a large number of reflective particles.

Brands of mirror coatings: TNL, OPI, Nayada, Orly, Patrisa Nail, CND, etc.

APPLICATION

Metallized coatings are applied in the same way as conventional UV varnishes.

• Preparation : leveling the nail plate with a buff, degreasing, applying 1 or 2 layers of base (depending on whether there are visible flaws on the surface of the nails);
• Application : two layers of metallized coating are usually sufficient;
• Fixing : applying a top with good detailing of the ends of the nails so that the coating does not chip off during wear.

“Chromatic” and mirror coatings have one very important distinctive feature. They highlight all the imperfections of the nail plate, which is why you need to align your nails well before applying metallic polish.

DESIGN OPTIONS

Gel polish with spreading effect

Nika Nagel gel polishes with a spreading effect are a choice of bright and extraordinary natures. With their help, you can create unusual designs and at the same time it is not at all necessary to have artistic skills.

APPLICATION FEATURES

Manicure is done using a regular base and top and special flowing coatings for wet design. How to create a beautiful pattern or design on your nails?

• Nail preparation : leveling, degreasing, base;
• Application : apply white varnish from the kit (we polymerize the first layer, but not the second);
• Creating an effect : on top of the undried varnish, use a thin brush to draw patterns with the colored varnish from the set and wait a couple of seconds until the pattern spreads over the surface of the nail, then dry it.
• Fixing : apply top coat.

The colored gel polishes in the set have a fairly liquid consistency, so they spread quickly and create a beautiful effect of one color flowing into another.

MANICURE OPTIONS

Craquelure

This type of decorative coating cracks on the nails, forming a beautiful texture. Recently, it has become fashionable to cover the craquelure with classic colored gel polish. The cracking effect is not so pronounced, but this design can be used as an everyday one.

Which collections have coatings with a craquelure effect: TNL, OPI, Nayada, etc.

HOW TO APPLY?

• Preparation : Nails are prepared for coating in the traditional way using a base coat.
• Application : a special base for craquelure (light or with glitter) is applied to the base, dried in a lamp, then covered with craquelure, air dried for 1 to 3 minutes.
• Consolidation of the result : top.

Recently, there has been a tendency to cover craquelure with color.

CRAQUELURE DESIGN OPTIONS

Hypoallergenic gel polishes

Hypoallergenic varnishes are a real godsend for women who are sensitive to various components of conventional varnishes. This type of varnish can be used during pregnancy or nursing mothers. They are produced on a water basis.

The most popular brands of hypoallergenic gel polishes: Patrisa Nail, Haruyama, Cuccio Veneer, Vogue Nails, Grattol, etc.

The hypoallergenic coating is applied in the standard way.

Bio gel nail polish

Bio gel nail polish will help maintain the health of natural nails and give them a beautiful and well-groomed look. The specially developed formula significantly eliminates common problems such as brittleness and delamination.

The most popular bio coating is EL CORAZON.

FEATURES OF USE

The bio-coating is applied without base or top, like simple nail polish, and air-dried. Dries quite quickly.

APPEARANCE OF BIO-GEL MANICURE

How to create a wet nail effect with gel polish

The effect of wet nails in a gel polish manicure is done by rubbing. First you need to cover them with a flower bed or camouflage base. And after drying and removing the sticky layer, rub shiny powder into the surface. It should be finely ground, and the color should be chosen according to your taste, since the shade of the gel polish will be hidden under it. After using the rub, fan the nails with a fan brush and cover them with a glossy top coat. The final step is its polymerization.

There is a second coating option, but “wet” nails will look as if there is dew on them. Manicure is performed in the usual way. After applying the flower bed, you can use a matte top coat over the entire surface. But then they put droplets on it with a glossy finish. And they send their hand into the lamp again.

Base for spreading gel polishes: how to work?

The principle of working with spreading varnishes is quite simple; you need to prepare your nails, as is usually done for applying gel polish. The cuticle area is prepared, shine and pterygium are removed. After this, everything is covered with a base, and then with two layers of the main color. Most often, such designs are made on black or white gel polish to achieve distinct floristry.

Instructions:

• After drying this coating in a lamp, apply a thin layer of spreading base, after which dots are very quickly applied using a brush or dots. Next, everything is connected using a brush or dots, or even chaotic movements are carried out in the area of ​​the drop.
• The most beautiful and unexpected color combinations are obtained if you use the layering technique.
• That is, placing one drop on top of another. After that connect. Thanks to this technique, unexpected color combinations, mixing effects, and also stains are obtained.

Is there a gel polish that spreads with a pattern?

Gel polish, which spreads in a pattern, is available from many manufacturers; the following products are known to provide the desired result:

• Nika Nagel gel polishes;
• MiiS base, which can be combined with flower beds from any company;
• flower beds and Rosalind solvent;
• BlueSky Flower Gel gel polishes;
• Gellaktic Mystic compositions.

These media may be called watercolors. Or there is no such definition on the bottle, but there is information about the spreading effect.

Drawing on a wet surface will make your nail design unique even with a simple image. This technique is accessible to beginners; it does not require additional funds or costs. And an unsuccessful picture can be corrected with a clean brush or erased with a napkin soaked in a degreaser.

Gel polish removal methods

There are two ways to remove artificial turf: using sawdust and by soaking it with a special liquid or napkins.

Sawdust

To remove the coating using sawdust, a special apparatus and removal cutters are required. Therefore, this option is suitable only for those girls who are familiar with hardware manicure.

Perhaps someone will have the thought: “Why not try to remove it with a rough file?” But we’ll immediately answer that this method is quite problematic, takes too much time and can damage the natural nail. It is necessary to try very hard to treat the area near the cuticle, and there is a risk of rubbing the skin. Therefore, at home, the easiest way to remove it is by soaking.

If you want to master sawdust removal, then sign up for basic courses at our licensed school “ParisNail”! After training, you will not only do a flawless manicure for yourself, but will become a real professional in the nail industry and will be able to work as a manicurist!

Maceration

This method involves soaking the gel polish with a special acetone-containing liquid. You will find a list of materials required for this procedure and detailed technology for removing gel polish in the article “How to remove gel polish (shellac) at home?”

NOTE! Not all base coats can be soaked, so ask the seller to select the base that is suitable for this type of removal.