Gel polish for LED lamp: brands. How much does an LED lamp for gel polish cost?

Ice (LED) lamps are small devices that use LED light bulbs to dry LED gels, some biogels, colored gels (not all) or any gel nail polish.
Each lamp is large enough to fit the nails of one hand.

And some models can accommodate two hands at once.

In this case, you do not need to leave your fingers under the lamp for a long time.

Ice lamps for nail extensions are considered a safe method compared to UVA/UVB curing because there is no risk of skin cancer from LED bulbs. Some gel manufacturers even create their own nail extension lamps.

LED nail dryers have many advantages over UV models.

• Firstly, they work much faster - it takes from 10 to 90 seconds to polymerize one layer of gel polish, as opposed to 1-3 minutes in a UV lamp for nail extensions.
• They are durable (LED lifespan is 50 thousand hours). The service life of one bulb in a UV lamp is from 1500 to 2000 hours.
• Ice lamps for nail extensions are more effective because they use a very small amount of energy.
• They don't get hot like UV lamps, so there's no risk of burning your hands.
• The best benefit is that the ultraviolet rays emitted by ice lamps are a tiny fraction of what UV lamps emit.
• LED lamps are environmentally friendly - they do not release any toxic chemicals into the environment when disposed of.

Disadvantages of ice lamps for nail extensions:

• LED lamps tend to be slightly more expensive than their UV counterparts.
• No matter how good the lamp is, eventually the time will come when you will have to replace it entirely, and not just buy a new light bulb as is the case with a UV lamp.
• Some gels do not harden in an ice lamp. It's all about the length of the emitted waves. Thus, in lamps with UV rays, fluorescent light is emitted in a wide range, and the gel hardens in any case. But LED devices do not provide enough light, so not every gel has enough light for polymerization.

We recommend: Which is better: Kodi gel polish or Shellac

Gel polish: what is it?

In nail salons, cute female nail technicians boldly manipulate terms such as “gel polish,” “shellac,” and “gel polish for an LED lamp.” All this diversity makes an ordinary woman's head spin. Making a choice is sometimes quite difficult. Although in fact there is nothing complicated in this terminology.

If we describe gel polish briefly, we can say that it is a coating that ideally combines the best properties of conventional nail polishes and gels. It looks like a viscous plastic substance that hardens under the influence of ultraviolet radiation.

Coating composition

Of course, each gel polish manufacturer has its own secret ingredients that make the product exclusive, but the basic composition of the coating is always the same. It includes the following components:

• film former - a substance that is susceptible to UV radiation;
• photoinitiator;
• active diluents;
• pigments;
• additives (they are responsible for the additional properties of the coating and maintaining gloss).

A good gel polish can last on your nails for quite a long time.

Shellac and gel polish: one product under different names?

Many women believe that shellac is just another name for gel polish. But in fact there is a difference between them. After all, shellac is a completely new coating that hardens much faster and does not require additional application of a protective coating to the nail plate. In addition, gel polish requires polishing the nail and is more difficult to remove. It is almost impossible to do this at home.

Therefore, each woman chooses which coating suits her best. Both gel polish and shellac have fans.

Rating

There are many mini-lamps that differ in cost and workmanship. We have compiled a list of the best devices based on user reviews and ratings.

LED lamp 3 W mini Runail

pros

• Easily fits in your purse
• Durable plastic housing
• The gel hardens quickly

Minuses

• Powered only from a fixed network

From 590 ₽

Compact LED lamp for polymerization of gel coatings, permanent varnishes, biogels, etc. There is a convenient button at the top of the case to turn the device on and off. It has compact dimensions and fits into any handbag. The unique feature of the model is its bright red body with a matte finish. The lamp is powered from a fixed network.

RuNail, UV lamp, model GL-515

pros

• Four ultraviolet lamps allow you to quickly dry any type of gel polish, gel paint, permanent varnish, etc.
• Works great on extended nails.
• Available consumables.

Minuses

• Quite heavy.
• Stained body.

From 1000 ₽

Ultraviolet dryer for gel polishes and any UV materials. It is made of durable plastic with a special coating, making it easy to clean and disinfect. There are two convenient buttons on the case - for turning on/off and activating the timer. Good power and the presence of 4 bulbs allows the device to quickly polymerize any types of gel polishes.

SUN Mini LED Nail Lamp

pros

• Convenient folding design
• You can dry your nails with a lamp even when folded, because... the legs do not block the diodes
• Works not only from a landline network, but also from USB
• An adapter is included

Minuses

• Short power cord

From 600 ₽

LED lamp for drying manicure with a folding body design. The average polymerization time is from 30 to 60 seconds. The device has a built-in timer for 45 and 60 seconds, which is adjusted using the universal button on the top of the case. It can work both from a fixed network and from a laptop or PC connector.

Solomeya LED, 3 W

pros

• Low price compared to other lamps
• Lightweight and compact foldable body
• Suitable for pedicure and manicure
• Can be used while traveling thanks to the laptop connector

Minuses

• Holds only three fingers at a time

From 500 ₽

Compact mini LED lamp for polymerizing gel polish. Suitable for both building gel and regular shellac. Power is supplied via a stationary power supply or a USB connector, which allows you to take the lamp with you on long trips or travels. The polymerization process is only 30 seconds (60 with thick coating).

Drying gel polish: time spent on manicure

The polymerization time of gel polishes differs depending on the saturation of the color pigment in the coating and the manufacturer. It happens that the same manufacturer produces coatings with different degrees of polymerization. Typically, clear gels dry under UV rays in approximately one minute. Colored gel polish for an LED lamp hardens in two minutes; thicker and more saturated coatings should be left to dry for about four minutes.

Of course, every master has his own secrets for drying nails. After all, a lot depends on the coating manufacturer; usually craftsmen try to purchase several products at once. Different batches may differ slightly in shades and properties. This creates certain difficulties when products from different batches end up on one nail.

Harm: myth and reality

There are opinions about the dangers of LED lamps, based on a complete misunderstanding of the principle of their operation. Here are some of them:

• Many people are afraid of exposure to ultraviolet radiation. However, this device is more gentle than conventional lamps, although it sometimes dries out the skin. Moreover, UV rays are useful, they have a sterilizing property - while drying the nail coating, the lamp at the same time kills pathogenic bacteria on your hands. This is described in the school physics textbook.
• The use of such devices raises concerns, because if primer gets on the skin of your hand due to careless work, then during the drying process you can get a painful sensation. But any unprofessional work is dangerous when using other lamps.

Here we can add only one thing: any electrical device in unprofessional, inexperienced hands can become dangerous.

Be sure to read the operating instructions before using the device, and not after malfunctions are discovered. Strictly follow all the recommendations contained in it, even if some warnings at first glance seem unnecessary.

Are all gel polishes suitable for LED lamps?

Beginners are always interested in what gel polishes are suitable for an LED lamp? They still have little understanding of the brands and properties of coatings, so sometimes they make mistakes and buy the wrong material for the job. To understand which gel polishes will be ideal for an LED lamp, you need to carefully look at the labeling of the bottle. The manufacturer always specifies which lamps their coating is suitable for. To be fair, it is worth noting that modern products are designed for almost any type of lamp. But still, you shouldn’t take risks; it’s better to carefully study the labeling:

• UV/LED - this combination of letters indicates that this is a universal coating. It feels great in any lamp and retains all its properties.
• LED - under this marking they produce coatings that are suitable for drying in an LED lamp. In such conditions, the gel polish dries in thirty to forty seconds. A similar gel polish for an LED lamp polymerizes well in CCFL dryers; the total hardening time ranges within six minutes.
• UV - do not use this coating for drying in a lamp. Polymerization will take a long time and does not guarantee a good result. Most often, the coating begins to delaminate immediately or hardens with unevenness.

If you follow the manufacturer's recommendations, your manicure will last the maximum amount of time possible.

Types of gels for nail extensions

Nail gel is a substance of varying density, located in a light-protective jar.
This substance is a mixture of complex organic molecules that are converted into a solid through polymerization in a UV or LED lamp. Extension gels are divided into 3 types:

1. Single-phase
2. Two-phase
3. Three-phase

To choose one of the three, you should look at their features.
Single phase. Contains three components at once: base, base and fixing top.

This gel promotes good adhesion to the nail plate, is easy to model and is quite durable. It saves a lot of time if you put it right next to each other)!

A two-phase gel contains only 2 components: base and base. The peculiarity of this gel is that at the last stage it is necessary to cover the nail with a fixing topcoat. Very convenient to use with French manicure.

A three-phase gel requires the application of a base gel, a constructing gel, and, accordingly, a finishing gel.

Now you have to choose which of the three types to choose. If you are professional enough and confident in your work, then no matter what gel you choose, you will succeed one hundred percent. But if you have not encountered extension gels or have little experience, then the best option for you will be a single-phase gel.

They can also be divided into transparent, white, camouflage and colored gels.

The easiest way to master working with transparent gel.

Choosing gel polish: nuances

All girls want their manicure to last a long time. This largely depends on the quality of the coating itself. Not all novice masters know what to look for when choosing manicure products. We will tell you how to buy the best gel polish. When looking through offers from different manufacturers, be attentive to the following points:

• the manufacturer must guarantee at least twenty-one days of durability of the coating, only in this case can you be sure that it will last at least two weeks;
• density of gel polish - it should not spread, but, nevertheless, the consistency cannot be too viscous;
• a wide color palette will allow you to combine shades and give room for creative imagination;
• The smell of the coating should not be pungent.

Not many manufacturers meet all these characteristics. That's what we'll talk about now.

What to look for in order to quickly and efficiently dry gel polish in a lamp: selection criteria

It’s not enough to just point your finger and decide on the type of lamp. Even each type has its own nuances that you should pay attention to before purchasing. More precisely, this is what you should rely on when making a decision.

Important condition or time for drying each layer

Now the type of lamp will reveal itself. After all, the drying speed completely depends on the characteristics of the device, or rather the inscription “UV” or “LED”.

• The latter tool attracted fans precisely because of its speed, because ultraviolet, despite its versatility and practicality, takes 2 times or even more time to work with each layer. And this is due to the wide light used. LEDs in ice lamps operate in a relatively narrow spectrum.

After variety power sets drying time

• All lamps have different power - from 6-9 W and above. It is logical to understand that the higher the power, the shorter the drying time. This also affects the quality of the coating.
• Thus, the power of the lamp is also a big factor contributing to the choice of nail devices. For example, it is better not to buy ultraviolet below 24 W, which is equivalent to 12 W for an LED lamp. Below this indicator, drying will not give good results. However, prices also increase as the lamp wattage increases.

The more power, the less time needed.
How does price affect our choice and drying time?

Yes, the price directly affects or even depends on the lamp. It is quite reasonable that more power will require more money.

• Also, LED lamps are an order of magnitude more expensive, although this depends on the power of the lamps. If we equate them to ultraviolet radiation, then there is not such a big jump in price.
• A hybrid, which is similar to two different lamps, is more expensive. For home use, it is absolutely not needed. It’s also not worth chasing just a high price. For example, acceptable models can be purchased at a minimal cost on Aliexpress . In terms of quality, they are absolutely not inferior to expensive brands.
• Consider only the minimum power. Also, start from your needs. For example, a novice master will not be able to get his nails done, so a miniature version of an LED lamp is quite suitable.

Size matters both for drying time and for your comfort.

• Basically, the market offers lamps of an acceptable size, which will allow you to dry your entire hand. Even compact devices easily cope with this function, but they simply work longer. Although, most likely, this is due not to the size, but to the presence of the number of lamps.
• More lamp area means more LEDs. UV lamps come in a standard box, in which the number of lamps only varies.
• There are also mini lamps that dry only one finger. Our verdict is that they are great for some single nail repairs, but not for a general manicure. After all, the time, naturally, increases significantly, by 10 times.

Lamp size matters
Lamp life is equal to lamp life

• Manufacturers claim that LED lamps have a service life of up to 50,000 hours. But, again, this is also affected by the power of the LEDs. In total, if you add up all the maximum equations, then such a device can burn without interruption for more than 2 years.
• UV lamps are relatively durable in use. For example, 1 drying per week will last you for 23 years. Of course, power also affects. On average, manufacturers claim that it is enough for 100 thousand hours of use. But the lamps will need to be changed after six months of use. Even if you don't turn it on often.

And a few words about design

• It does not affect the drying time of the layers in any way. If a certain color is important to you, then it is only your choice. We recommend not to overpay more, but rather to focus on the power and number of lamps.

But the design will not affect the drying speed in any way

Gel varnishes for LED lamps: brands

Several gel polish manufacturers have established themselves on the Russian market. Moreover, the price range in this area is quite wide. You can choose coverage from two hundred and fifty rubles to one thousand rubles. Please note that low cost does not mean poor quality of the coating.

The very first gel polishes from American manufacturers hit our market. They have a wide range of colors and excellent quality. This product does not emit a strong odor and often contains an innovative formula that helps increase the durability of the coating. Naturally, the most popular among American manufacturers is Shellac CND. This innovative gel polish has already become a household name in the world of nail services. But in fact, only the coating of this brand can be called shellac. The cost of one bottle ranges from one thousand rubles, the bottles have an average volume.

American Gelish Harmony has already proven itself to be the most harmless gel polish of all existing ones. It is available in large bottles of at least fifteen milliliters, and the cost does not exceed one thousand rubles. This gel polish for LED lamps receives the most enthusiastic reviews from clients. The coating remains on the nails until the nail has completely grown out, which in some cases exceeds thirty days.

In terms of durability, only the Pnb brand can compete with the previous brand. This product is in a lower price category, but the quality of the coating exceeds all expectations of nail salon clients. The cost of one bottle usually does not exceed four hundred rubles.

Don't be afraid of Chinese gel polish manufacturers. They are very popular, and the quality is not inferior to American brands. The most common is Bluesky. This Chinese gel polish can adequately withstand competition with more expensive American manufacturers. The average cost of a bottle of this brand is two hundred and thirty rubles, which allows you to purchase the entire color palette without financial losses for the budget. The only disadvantage of this brand is the difficulty in removing the coating; it is cut off along with the base layer.

Recently, Russian gel polishes have appeared on the market. They have not yet managed to win the love of consumers, but they are confidently moving in this direction. The RuNail brand stands out among Russian manufacturers. This coating is excellent for thin nails; during use, it significantly improves the health of the nail plate. Based on reviews of this product, it can be assumed that it will soon become one of the five most popular gel polishes in the country. The cost of one bottle does not exceed two hundred and fifty rubles. This allows the Russian brand to successfully compete with a cheap product from a Chinese manufacturer.

Rating of gels for nail extensions of popular brands

The most important question is still open to us: which gel should we choose?

Let's look at several brands: Nails Time, Bloom and Cosmo.

Gels from Nails Time

An excellent tool for modeling artificial nails when extending and strengthening can be considered a series of Nails Time manicure products, which are produced in Poland. The manufacturer made sure that the composition included only the best and safest components that protect the nail plate. The gel consistency is convenient and easy to apply. A wide variety of transparent, camouflage and colored gels in this line are in harmony with each other and complement each other. In this series you can select gels for both LED lamps and UV lamps. Amazing durability and ease of application. The naturalness of the coating will make you doubt that it is artificial, since the colors of the camouflages are perfectly natural. The price also pleasantly surprises with its affordability. Well, we don’t need to talk about the importance of using materials from the same line, since this is mostly the basis of the basics, as well as professionalism!

In this brand you can find everything: from primer to topcoat. Convenient and airtight packaging, all jars are closed tightly enough, so they can be used by craftsmen who work on the road without fear.

Gels from Bloom

The Bloom brand from a Russian manufacturer is beginning to get ahead of its competitors and offers a fairly interesting range of gels, which can also be dried in both LED and UV lamps, which is remarkable: they do not cause peeling, self-level well and have a variety of shades. His collection includes hard gels, jelly gels and nail extension gels, as well as low-temperature gels. They are quite thick, unfortunately or fortunately they do not level out, but they do not flow into the sinuses. They can be used to model, strengthen nails, or simply add nail growth.

Crystal clear gels, which have a medium consistency, self-level well and are suitable for arch modeling, and after drying they remain crystal clear and do not turn yellow over time.

There is also a line of low-temperature gels that are suitable for a three-phase nail extension system. This gel does not burn when drying, the material does not shrink and is perfectly leveled. Due to its consistency, this gel can be applied not only to lower forms, but also used for extensions to upper forms. These gels can be combined with any base and top, but ideally use bases from the same line. From myself I can say: “Price-Quality!”

LED lamp: features and brief description

A good LED lamp for gel polish is almost 80% of a perfect manicure. It largely determines how long the coating will stay on your nails. But let's talk about everything in order.

Modern LED lamps use LED bulbs. They allow you not to change them in the device for as long as possible, because the average burning life of such a lamp is designed for fifty thousand hours. Moreover, this figure does not even imply turning off the device. Nail technicians highly appreciate the capabilities of the LED lamp, because there is no need to change the LEDs in the device. Even if one or two diodes burn out, the lamp will work just as well as before.

How to dry with a lamp

Drying lamps

It is perhaps difficult to argue with the fact that a drying lamp is the main device when creating a long-lasting coating on your nails. For a modern manicurist, it is as necessary as, for example, a milling cutter. Nowadays, in manicure, 4 types of drying lamps are used: ultraviolet, LED, gas light and combined.

1. Ultraviolet (aka UV, aka UV) lamp. It is universal: you can dry both gel polish and other coatings. Has power from 9 watts to 54. Ideal for home use. Advantages: wide price range and huge selection of designs. The most significant drawback is the short lifespan of fluorescent light bulbs, but they are not difficult to replace.
2. LED (or LED lamp). These are usually used by professionals. Power – from 12 to 45 watts. It has a long service life because the device has built-in LEDs. The main drawback is that it is intended only for a certain category of gel polishes (usually they are marked “LED”).
3. Gas light or CCFL lamp. Emits the same ultraviolet waves necessary for polymerization as a conventional UV lamp. It only “warms” thanks to the glow of gas in a light bulb with a cold cathode. The advantage is that the lamp is energy saving. Disadvantage: does not always dry evenly.
4. Combined or hybrid - the latest generation device. Combines two types of radiation: fluorescent and LED. Thanks to this combined effect, the polymerization time is significantly reduced. Dries all types of nail polishes. Power – from 6 to 54 watts. The disadvantage is the rather high price.

Attention! Manufacturers of gel polishes always write on the labels in which device the product should be polymerized. If you use a lamp that is not suitable for a particular product, there is a high probability of ruining your manicure.

Subtleties of choice

The choice of lamp for drying should be treated with special attention - the purchase is not made for one year. Of course, we want the lamp to be easy to use, light, compact and beautiful.

But when choosing, it is equally important to take into account the technical characteristics that determine reliability - whether the device can work normally for several years. So, when buying a lamp for drying nails, it is advisable to consider the following:

• Drying time. Directly depends on the type of device. Ultraviolet devices dry a little longer, and hybrid or LED devices dry a little faster - sometimes it takes only 30 seconds for complete polymerization.
• Power. Directly affects the speed of work. For beginners, it is better to use a device with medium power. The best result for UV lamps is provided by a device with four 9-watt bulbs (or three 12-watt bulbs) - a total power of 36 watts. This lamp can do almost anything - for example, aquarium design, working with the thickest gels and thick coatings. You can dry any layer in it in a couple of minutes. More often, such devices are purchased by “home” nail professionals. Lamps with higher power (48 - 54 watts) increase speed, but require considerable experience and are therefore more often used in salons.
• Price. Directly proportional to the type of device. Ultraviolet is considered the cheapest. The cost starts from 700 rubles (and you can find cheaper ones on Aliexpress). The most expensive is a combination lamp. Of course, high cost is not always a guarantee of quality.
• Size. It is easy to find devices of different sizes on the market. On some you can dry all the fingers on both hands at once, on others you can dry only one hand. One thing is clear: the larger the device, the more light elements it contains (therefore, the drying time is noticeably reduced).

Today, lamps for drying gel polish are presented on the market in a very large assortment.

Which one to buy primarily depends on your experience.

Note: When purchasing replacement bulbs for UV lamps, you should pay special attention to the packaging: the higher the quality of the bulb, the better it is packaged. The box must have the necessary markings (manufacturer, date of manufacture, power), and inside there must be a special cardboard holder. If the light bulbs are just lying in a white box without markings or inner packaging, it is better not to take them. (If you have already purchased, do not repeat the mistake next time). In general, it is best to buy such a product “live”: go to the seller with your lamp and check the light bulbs right on the spot. And at the same time, do not fall for persuasion like “buy something instead of something, because they don’t exist yet, but these are still better.”

Common Mistakes

To create a flawless manicure, you need to properly apply gel polish and dry it. If the coating has wrinkled, bubbled or rolled up, then the likely cause is:

1. Insufficient polymerization. Some dyes have a thick and dense consistency. Because of this, they require longer drying times.
2. The problem is the light bulbs. They no longer cope with their task, so they need to be replaced.
3. Thick coating layer. Has it ever happened to you that your nail plate started to burn while drying? I'm sure almost everyone has encountered such trouble. This may mean that the gel polish is applied too liberally to the nails and does not cure completely. And hello, ruined manicure!
4. Poor quality product. Products from even the most popular brands may be expired, damaged as a result of improper storage, or simply defective.

Advice. If you have little experience, then before applying gel polish to the nail plate, first practice on the palette. This way you can protect yourself from many unpleasant moments.

How does an LED lamp differ from other dryers?

An LED lamp for drying gel polish has a certain wavelength to which other coatings are immune. Standard UV lamps emit a wide range of waves and are suitable for any shellac and gel polish. But LED lamps can only emit a narrow A-type wave; it requires a special composition. Otherwise, the gel polish will not harden under the influence of this type of wave.

An LED nail lamp can have different power levels. The more power your device has, the less time will be spent on the polymerization process of the composition. This will also reduce the time spent on manicure. According to experts, an LED nail lamp should have a power in the range of twenty to thirty-five watts. Do not forget that the power of the drying device does not affect the quality of polymerization. Any lamp will completely dry the gel polish, but the speed of this process can be completely different.

How to use UV nail gel

You can use UV gel on your own, since it is quite easily evenly distributed over the nail bed. However, keep in mind that you must first make sure of its quality; it should not be too liquid, since then the solution will quickly spread before you have time to dry it. It is impossible to perform extensions with this gel.

Also pre-prepare consumables and tools:

• File;
• Pusher or orange stick;
• Nail scissors;
• Bafik;
• Degreaser;
• Primer;
• Brush;
• UV gel;
• Forms for extensions;
• UV lamp.

If you want to decorate your nails, prepare decorative elements and colored pigments to cover the nail plates.

Treat all instruments with an antiseptic to prevent infection from entering the body if the periungual area is damaged.

The procedure begins with basic nail treatment:

1. Use a file to adjust the shape of the free edge, cut it to a length of 1-2 mm.
2. Apply the remover to the cuticle. Use a pusher or an orange stick to push it away and cut it off with scissors.
3. Remove the gloss from your nails with a buff.
4. Cut the required length for extensions on the forms, fix them under the free edge of the nail.
5. Load a brush with gel and place it in the center of the nail. Gradually level it first on the sides, then in the center, using a thin brush to decorate the cuticle area.
6. Turn your finger face down so that the glass base is towards the center for 7-10 seconds. In this position, use a brush to carefully correct all existing defects and irregularities.
7. Return your finger to its original position, make sure there are no defects, and dry the layer for 1.5 minutes.
8. If you do not plan to apply gel polish, but want to focus the design only on the UV gel, apply another layer of the composition, but a thinner one. Repeat the manipulations described above. This will be easier to do, since a large amount of solution will not flow in any direction. Dry the layer.
9. Carefully remove the form from your nails.
10. If you want to apply a decorative coating, apply a base, color pigments, and top coat.
11. Remove the sticky layer with a cleaner (you can use a degreaser).

If you follow the step-by-step instructions, you will get an accurate result that will remain in the same condition for up to 3-4 weeks.

Due to the fairly plastic and thick consistency of the solution, they are convenient to apply, therefore, regardless of the style of the work, even a novice in the manicure field can do it.

Absolutely any design can be made on such a coating, since the composition will provide increased density and strength of the substrate, which will withstand even a large number of rhinestones, beads or other voluminous decor.

How to choose a lamp?

Buying a nail dryer is a very difficult undertaking. You need to take into account a lot of nuances and characteristics:

• Capacity of the device - now manufacturers produce several types of LED lamps. You can choose to dry with five fingers or one, it all depends on your personal preference.
• Timer - it must be installed on all devices. It is best if your lamp has a minute and second timer, the so-called hybrid. This will allow you to dry any type of gel polish.
• The automatic switch is a very good feature that allows you to control the polymerization process.
• Pallet - if your tray can be removed, then you can do not only manicures, but also pedicures.

Of course, you can find lamps with wider functionality. It all depends on your preferences and financial capabilities. But the listed characteristics must be present in the device.

Advantages and disadvantages of mini lamps

Like any device, mini-lamps have their advantages and disadvantages. Basically, they relate to ease of use and duration of polymerization. All features are indicated relative to conventional lamps:

Advantages:

• compact dimensions;
• can be powered either from a fixed network or from a laptop;
• easily fits into a handbag;
• can be moved during the process;
• consume less electricity;
• you can take it with you on trips.

Flaws:

• due to the small capacity, the polymerization process takes longer;
• there are no useful functions like a fan or reflector;
• not as powerful as full-size manicure lamps;
• do not have a pallet.

Cost of a nail drying device

So, how much does an LED lamp for gel polish cost? First of all, the price depends on the manufacturer and power of the device. If you want to purchase a device that combines capacity and quality, then you should take a closer look at MelodySusie Violetili. This is an excellent model that has several types of timers and everything you need to make your work process enjoyable. The price of the device ranges from 6,000 rubles.

If you want to purchase a more expensive LED lamp, then Creative Nail is the one for you. This model is slightly more expensive than the previous one - its cost is close to 6,500 rubles. It is worth noting that this device has a lot of additional functions and is almost universal. With its help, you can do manicures, pedicures, take the device with you and change its settings.

One of the most expensive models is the Nail Harmony Gelish lamp. This device costs at least 15,000 rubles, but dries the coating on your nails in literally five seconds. Great for professional use.

Comparison table of characteristics

In order to compare the products presented, we recommend that you study the comparison table in the article below.

You may be interested in: The best TOP 10 models of floor electronic scales for the home: how to choose the right ones