How to insert a blade into a heel scraper. How to use a razor for a pedicure? How to properly do a pedicure with a razor. Incorrect movements

Women often prefer shaved pedicures because they are convenient, simple and effective. But how to properly do a pedicure with a razor without getting hurt? Why doesn't it live up to expectations? These are the 7 main female mistakes that prevent you from doing a pedicure correctly.

Craftsmen believe that a classic razor is an excellent way to deal with rough heels. Hence the conclusion: there is no need to listen to folk craftsmen. There is a special device for pedicure with a razor. Its design, including the blades, is ideal for cutting rough skin. But a regular razor is not able to cope with roughness by five.

How to properly do a pedicure with a razor. Improper use

A pedicure machine (as, by the way, any blades) should not be used on the skin around the nails. That is, you definitely won’t be able to cut off the cuticle and burrs with them. Unless, of course, you want to give yourself a few wounds from the blades. The razor should only be used on very rough skin and calluses.

If you work with dry skin, it will be extremely difficult to ensure correct movements and pressure. It's too hard for blades. The result of cutting the skin dry: cuts, scratches, scraps of skin, different thicknesses. How to prepare your skin for a pedicure? Make a foot bath. Add sea salt or hydrogen peroxide to the water and wait 20 minutes until it steams and becomes loose enough to easily yield to the pressure of the machine.

Instructions and recommendations

Complete removal of cracks with a pedicure machine cannot be achieved with one procedure. To obtain the desired result, only two or three sessions will help.

It is forbidden to get rid of all the rough skin the first time, as this will cause pain and injury.

When the foot care procedure is completed, the pedicure machine is disassembled, cleaned, disinfected or sterilized. The tool is assembled only after the parts have dried. This will prevent rust from appearing on the scrapers. Before each treatment, it is advisable to replace the old blade with a new one.

How to properly do a pedicure with a razor. Incorrect movements

How to properly perform a pedicure with a razor so that the skin is evenly smooth and soft? There is a blade movement pattern that ensures proper care. Firstly, you need to move from the edges to the center. That is, first you treat the outer areas of the foot, and then the inner ones. The machine should capture small areas of skin; there is no need to immediately swing at a long strip. Secondly, the skin is first cut off in the roughest places: on the pads of the toes and heels, as well as wherever there are corns. Work on the least rough areas last. Where there is simply a softened, easily processed layer of dead cells, there is no need to cut off anything - the scrub will work. Thirdly, you need to regulate the degree of pressure on the razor. The thicker and rougher the layer, the stronger the pressure should be, and vice versa.

Features of using cosmetic products for heels

The product performs a complex of various actions, especially relevant in the summer, when the skin lacks moisture and becomes rough, and in the spring, when it is time to try on light shoes that expose the foot. Treatment with a liquid blade is perfect for all ladies who want to achieve an excellent effect on their legs, look well-groomed and attractive. In addition, the cosmetic substance has indications for use in the following cases:

1. A nail plate that has grown into the skin, resulting from wearing tight shoes, improper gait, performing a pedicure with non-sterile instruments, or the presence of fungal infections.
2. The appearance of cracks of various sizes on the surface of the heels.
3. Dry, keratinized, rough skin with heavily overgrown epidermis, calluses, corns.
4. If your feet sweat profusely (hyperhidrosis). The fruit acid contained can regulate sweating.
5. In case of diabetes mellitus at different stages, when trimmed manicures and pedicures are contraindicated, because wounds are difficult to heal.
6. Fungus on nails and dermis.

Photos before and after using the liquid blade

How to properly do a pedicure with a razor. The machine is the only thing you need for a pedicure

For some reason, women believe that a pedicure machine with a razor is enough to make the skin on their legs velvety. In fact, this is far from the case. How to properly do a pedicure with a razor? After processing with a machine, it needs to be sanded, then treated with peeling or scrub, the skin around the nail plate should be carefully trimmed with tweezers, and the cuticle should be pushed back with a special stick. Only then will your feet acquire a healthy and well-groomed appearance. Moreover, these procedures are also necessary because they ensure uniform removal of hardened layers throughout the entire foot. After such care, nicks, pieces of skin and hangnails will not bother you.

For most, pedicure is associated exclusively with toenail care procedures. In fact, no less attention is paid to the condition of the foot, so that its skin always remains smooth and pleasant to look at.

For these purposes, many auxiliary tools are used, but one of the most effective is a pedicure machine.

Care to prolong the effect

Of course, once you see results, you'll want them to last as long as possible. In order not to repeat the procedure too often and not make your health worse, you can use simple ways to prolong the effect of smooth legs. To do this, just adhere to the following rules:

• Foot care with creams and scrubs . Use foot cream morning and evening. Scrub the skin of your legs 2-3 times a week and then the effect will last for many months to come.
• Massage . Don't forget to massage your legs to improve blood circulation. You can massage at night when you apply the cream or when you scrub your skin.
• Comfortable shoes . Don't forget that all problems come from your feet, or rather, from the shoes you wear. Make sure that it is really comfortable for you to walk - a soft insole, a wide toe box and a comfortable last if we are talking about heels. Basically, all corns are formed from the fact that you wear shoes with thin soles. If possible, replace such items of clothing with more comfortable ones or insert orthopedic insoles to achieve maximum comfort for your feet.

Description and purpose of the tool

Visually, a machine for a classic pedicure is not much different from those used for shaving. The device of the instrument can be described briefly, dividing it into several parts:

• blade;
• nail files that polish the surface of the skin;
• the main part to which the attachments are attached.

The main difference from shaving machines is that especially sharp blades are used here, so you need to work with them very carefully. They gently capture a small part of the keratinized skin. The razor is rougher, causing deep cuts and untreated areas on the foot.

Experienced professionals call this procedure a trim pedicure. As a rule, it is included in the standard list of services.

Are there any contraindications for the liquid blade?

A liquid pedicure blade should not be applied if there are small cuts and various wounds on the skin of the feet. The cover must be intact, otherwise the acid will penetrate inside and cause pain. Before starting, you need to conduct a compatibility test and make sure that the fruit acid will not cause allergic reactions in you. To do this, apply a small amount of the composition to a small area of ​​​​the heels, hold for 10 minutes, make sure that there is no itching or unpleasant sensation. If everything is fine, you can safely begin to perform it correctly, making your legs beautiful and well-groomed.

Advantages and disadvantages

Trim pedicure has a number of advantages and disadvantages. You should familiarize yourself with them in advance so as not to become a victim of unpleasant surprises in the future.

The advantages include:

• the opportunity to save on the services of a master by purchasing a machine for personal use at home;
• high efficiency;
• low risk of injury;
• long-term preservation of the effect after the procedure;
• small investment of time.

The list of disadvantages includes:

• the chance of injury is low, but still present;
• the need for sterility of the machine itself and the surrounding conditions;
• preliminary steaming of the legs;
• mandatory use of moisturizing creams to maintain the effect.

Types of machines

Pedicure can be classic or hardware. In the first case, the specialist uses a scraper, and in the second, a milling cutter. The latter is practiced in beauty salons.

In addition, there are other tools: electric, roller, abrasive files and pumice.

Electrical

This variety is best suited for home use. Its safety blades ensure that you will not injure yourself if your hand shakes or excessive force is applied.

The tools have multiple speeds, allowing you to fine-tune them depending on the condition of your feet. In addition, the use of various attachments is allowed, and this significantly simplifies the procedure.

Manual

Standard scraper with replaceable stainless steel blades. It cuts the skin more efficiently than an electric machine, but you need to remember that a pedicure with a blade at home can be dangerous.

It has a long service life, but requires special attention to sterilization of the blades. Disinfectants ensure that you do not become infected or introduce harmful bacteria into your body.

Set of tools for express pedicure

It’s not difficult to do an acid pedicure correctly, but you first need to have the necessary set of tools. To get started, purchase a pedicure solution from a trusted manufacturer, for example, domix, and learn in detail how to use it in the available instructions for use. In combination with it, you will need a disinfectant that you will use to treat fungi and bacteria. A good moisturizer will be useful for the procedure.

You will need to have a coarse abrasive file on hand to shape your nails and do the initial cutting. You will also need a pedicure fine-grained emery grater for sanding at the final stage and regular pumice to help remove old epidermis.

Take care of the hygiene kit. It should include a clean towel, dry wipes, cotton pads for application, and a tray with a ribbed bottom called a cuvette. Keep in mind that all manipulations with acid must be done with rubber medical gloves.

Tools for acid pedicure

How the blade is inserted

Typically, machines use a universal blade, so the process of replacing it is carried out in several steps.

The first step is to remove the cover that secures the position of the blade in one position. To do this, you may need to unscrew it, or it will be latched. When this process is completed, the old blade is pulled out.

This next step is often overlooked by people, but its importance cannot be underestimated. All components of the machine must be disinfected using a suitable solution. This is useful as it makes it easier to reach hard-to-reach corners.

Finally, it's time to insert the new blade into the pedicure machine, positioning it the same way you did with the old one. You need to pay attention to ensure that the holes match, the latches do not clamp anything unnecessary, and the blade is held tightly.

Many people try to completely treat all their skin at once, putting too much effort into it. The result of this is injury and discomfort when walking. This is one of the main mistakes among beginners.

It must be remembered that the soles of the feet, covered with deep cracks and large growths of hardened skin, can be cleaned in several sessions, without haste or self-abuse.

Another tip for using the machine would be a reminder to timely treat the blade and other components of the tool with disinfectants. They try to remind people of this as often as possible, since the consequences of neglect lead to a visit to the doctor and long-term treatment.

Contraindication to the procedure

A pedicure machine or knife are the ultimate solutions that are relevant in cases where nothing else helps. Light roughness of the skin can be easily removed with the help of special creams, pumice and other means.

Trying to treat skin that is too delicate, a person will inevitably damage it and then have difficulty moving for several days.

Methods of performing a professional pedicure in a salon

If you have one of the above problems, you should visit a specialist and do not delay treatment. Leaving the disease without intervention is fraught with the development of complications, for example, an ingrown toenail may eventually need to be restored only with a laser, or with prosthetics using capolin.

Chemical treatment of feet when visiting a beauty salon is carried out within 1-1.5 hours. Initially, the specialist treats the feet with liquid soap with fruit acids, then peels with the application of a product containing plant extracts and enzymes. This helps clean the surface, moisturize, get rid of dead cells, also perfectly massages the legs and improves blood circulation. A concentrated peeling gel with aloe and urea is additionally applied to problem areas.

After this, the nails and feet are disinfected to prevent the appearance of fungus. At the final stage of the procedure, the feet are covered with a nourishing aromatic cream with vitamins and essential oils, and all you have to do is enjoy the health and beauty of the updated pedicure.

Step-by-step analysis of the procedure

You need to use a pedicure blade in stages. If you follow the order, then no problems will arise:

1. To begin with, the feet are treated with moderately hot water to soften the skin. This takes no more than 30 minutes.
2. Next, you need to pick up the machine and bring it to your foot at an angle of 45 degrees. In this case, the leg must be positioned comfortably enough so that the movements do not encounter resistance and are not too sharp.
3. Lightly and smoothly draw the blade across the skin. Under no circumstances should force be used. Movements always begin from the very edge of the rough skin, but not from the center. You have to get to the middle at the very end.
4. The presence of cracks in the heels complicates the process. It is necessary to guide the machine along the wounds so as not to make them even deeper.
5. Upon completion of the procedure, it is recommended to use a file to smooth out the unevenness.
6. The final touch is applying moisturizer and warming your feet with warm socks.

First of all, you need to pay attention to the material that is used to secure the blade and head to the handle. Ideally, it would be stainless steel. The remaining options are either not reliable enough or are susceptible to corrosion.

Cheap machines become rusty over time and their fastenings become loose. All this leads to a decrease in the effectiveness of the tool and also increases the risk of injury. Therefore, you need to try not to save too much, and even better, choose a popular model.

Causes of deterioration of heels and feet

Problems with the skin of the heels indicate a lack of vitamins. To improve the condition of the body, the dermatologist will prescribe a vitamin complex. Heels dry out due to incorrect or uncomfortable shoes. Also, many people forget that they need to moisturize their feet and do regular pedicure procedures, otherwise unpleasant moments will appear.

Do not neglect the rules of personal hygiene and it is better to minimize the wearing of synthetic tights and socks. Under such conditions, a favorable environment is created for the life of bacteria and their reproduction. Foot care procedures are carried out regularly, and it is better to replace synthetic items with natural materials.

Remember that if strange symptoms appear on your heels, it is better to immediately consult a dermatologist. He will assess the current situation and tell you the treatment plan. If there are any restrictions on the use of an electric razor, then it is better to abandon it. Do not overdo the pedicure using a regular machine, as this will damage the skin and cause inflammation.

Thanks to a thorough and careful manicure, your heels will be in a healthy condition and will not require the help of a doctor or additional treatment.

Brief list of brands

Tools from the Staleks brand are widely used. This is due to the convenient design of the handle and the use of stainless steel for individual parts of the machine. A universal solution that effectively removes rough skin not only after steaming, but also “dry”.

Titania is a European manufacturer that supplies us with fairly cheap machines with blades that do not require replacement. As in the previous case, there is a stainless steel head and blade, and the handle is made of plastic.

The list can be completed with another European brand – Beter. Its advantage is the availability of replaceable blades, purchased immediately as part of the kit. In all other respects, it is not much different from other quality instruments.

A variety of foot care methods allows us to choose the best option for procedures and often eliminates the need for regular visits to a professional beauty salon. From time to time, you can pamper your feet with long and very pleasant spa treatments at home, and a liquid blade or pedicure socks allow us to quickly cleanse your feet of dead skin. But what should we do if the skin on our heels very quickly thickens and turns into ugly corns, causing dangerous cracks to deepen? In this case, it is advisable to have on hand a set of tools for a classic (trimming) pedicure, and a special machine with replaceable blades plays a very important role in the fight against keratinized corns and calluses on the feet.

Pedicure machine

is a convenient tool in the form of a scraper with sharp blades that evenly cut off dead skin on the feet, but at the same time are as safe as possible for the delicate epidermis. With the help of a pedicure machine, you will quickly get rid of calluses and corns, returning healthy color and elasticity to your well-groomed heels. Unlike such traditional tools for classic pedicure as a grater, pumice stone or file, using a pedicure machine it is very convenient to cut off hard-to-reach keratinized areas of skin, and the procedure itself takes little time. There are a variety of machine models on sale, differing in the size of the scraper head, the shape of the blades and other characteristics.

Just like a shaving machine, a pedicure scraper has one side sharp and the other safe to protect delicate skin from cuts. However, you must use the tool very carefully, but perform each movement confidently, clearly control the pressure and depth of cut of the rough skin on the heels. Most brands sell pedicure machines in a set with spare blades and sanding files for treating feet. Blades made of high-quality medical steel are more expensive, but they will last you more than one month even with weekly foot care.

♦ HOW TO USE THE PEDICURE MACHINE CORRECTLY

❶ Preparation. First, let's thoroughly steam the legs in a bath of warm water, to which you can add hydrogen peroxide as a disinfectant. Keep your feet in the bath for 15-20 minutes, and then wipe dry with a soft towel;

❷ If the corns are very dense and multi-layered, then you can apply an ointment or cream with keratolytics to the heels to destroy the connection between dead epidermal cells;

❸ How to insert a blade into a classic model machine: place the blade “ears up” on your palm, press the tool head to the blade, push the latch forward with your finger and snap it into place (see video at the end of the article);

❹ Take the machine in your working hand and turn your foot so that any part of the heel can be easily reached. Hold the tool at an angle of approximately 45° and slowly cut off a thin layer of dead skin. We move without strong pressure from the edges to the middle, at a uniform speed, and if there are cracks on the corns, then pull the head of the machine along the damage;

❺ Next, carefully cut off the compacted areas of skin on the fingers and rubbed calluses (if there are no open wounds on them!). If you feel the slightest discomfort or pain, stop treating your feet and examine the problem area to see if the machine blade has caught “living” tissue;

❻ After cutting off the dead skin, take a pedicure file of medium abrasiveness and use the tool to treat all uneven and rough areas of the skin. Then sand the skin of the foot with a wide, finely abrasive file and begin processing the nail plates and removing the cuticle with pedicure tools;

❼ Immerse the feet in a bath of clean warm water, to which you can add sea salt, essential oils, herbal decoctions (St. John’s wort, chamomile, string). After 15 minutes, wipe your feet with a soft towel;

❽ Treat your feet with an antiseptic, apply nourishing and moisturizing foot cream.

♦ POPULAR BRANDS

Electric Scraper Scholl Hard Skin Remover:

Pedi Spin Pedicure Set:

Zinger scraper made of stainless medical steel:

Professional pedicure machine “Stalex R7–11”:

Olton pedicure cutting machine made of surgical steel:

♦ RESULTS

— in the photo: feet before and after treatment with a pedicure machine

♦ VIDEO LESSONS

Winter is not a reason to forget about proper heel care, since this part of the body requires attention regardless of whether we wear open shoes or hide our feet in boots. Well-groomed heels are the pride of every woman and the key to overall healthy feet. Therefore, the pedicure procedure should be carried out regularly - at least once a week. In addition, you should approach the issue of removing keratinized skin on the heels with all responsibility, using the necessary tools and cosmetics. But what to do if the skin on the heels is very rough and ordinary pumice stone is not able to cope with this problem? A pedicure machine will come to the rescue, which will be discussed in our publication today. What kind of device this is and how to use the pedicure machine, we will tell you further.

Let's start with the fact that a pedicure machine has nothing in common with a razor, which many savvy ladies use to remove rough skin on their heels. It is unacceptable to use a razor in a pedicure under any circumstances! After all, sharp razor blades are not designed to remove dead skin. In addition, using shaving “tools” for other purposes is fraught with foot injuries, which, if not disinfected, can lead to serious consequences. Therefore, let's agree that we will abandon the idea of ​​​​using a razor for pedicure once and for all.

As for the special pedicure machine, this device is designed for performing trimmed pedicures and is a tool with replaceable stainless steel attachments and a comfortable handle. This tool is designed to remove severely rough skin on the feet that pumice cannot remove.

Carrying out the procedure for removing dead skin on the feet using a pedicure machine is simple and safe. At the same time, you can use the razor yourself, at home. This is simply a godsend for those people who develop dry, hardened calluses, corns and severely keratinized skin on the feet. With a slight degree of keratinization of the skin, that is, when the heels are in normal shape, there is no need to use a pedicure machine. Regular foot peeling, pedicure socks and pumice will help solve this problem.

Many women are interested in the question: is it possible to get injured by a pedicure machine? We answer: the risk of cutting yourself with a pedicure machine is minimized, since its special design is designed to protect your legs from cuts. However, this does not mean that you should neglect the disinfectant when using a pedicure machine. Well, we’ll tell you in more detail about how to properly use a pedicure machine below.

Getting ready

Getting ready

For a blade pedicure, you will need a bowl of warm water and softener, a special machine with a blade, as well as a nail treatment kit and nail polish. Just in case, stock up on a bandage, cotton wool and hydrogen peroxide, especially if the condition of your feet leaves much to be desired and you are new to this dangerous business.

Instructions for using the pedicure machine:

1. First of all, you should prepare the skin of your feet for removing dead skin by first steaming your feet in a bath.
2. Now, with light but confident movements, use the machine to remove the rough skin, as if using a scraper. You should start from the edges of the foot, gradually moving towards the center. You should not press hard on the skin, and if you suddenly feel even a slight pain, then ease the pressure.
3. After you have treated the skin of your feet, place your feet in the bath, polish them, wet them with a napkin and apply nourishing cream.

On a note!

Do not use a pedicure machine on your cuticles under any circumstances. There are special tools for this. Also, you should not expect an instant result: the smoothness of your heels is noted after the first procedure, but an ideal result can only be achieved with regular use of the pedicure machine. Do not forget that the use of a pedicure machine is permissible only if the feet are very neglected. In normal skin condition, using a pedicure machine will lead to the growth of rough areas. Therefore, use this tool only when necessary.

Although many alternative ways have already been invented to get rid of rough areas on the feet, pedicure machines do not lose their position of popularity. A pedicurist, with the help of this simple device, can get rid of annoying layers of rough and lifeless skin in a short time.

Recommendations before use

Before you start using a pedicure machine, please read some points. First of all, the legs are steamed immediately before the procedure. This is done using foot baths. Oils and flavorings are added to them. If there are cracks, chamomile infusion or sage is added. Also, if there are very rough areas of skin, it is recommended to soften them with special foot creams before the procedure. This will reduce the likelihood of an injury or cut and improve the final outcome.

First acquaintance with the machine

Among the powerful arsenal of a pedicure master, there are many tools. For hardware pedicure - your own, and for trimming - your own professional kits. For the latter type of manicure, using a machine is common. This item is minimally similar in appearance to its comrade of the same name - a razor, but they still have common components:

1. comfortable handle;
2. blade holder head (usually made of stainless steel);
3. blade (replaceable sharp nozzle).

This simple design is intended specifically for pedicures; the machine is not used on other parts of the body. The razor blade is replaceable, which allows you to easily change it and always use a sharp unit.

The working surface of the product (head with blade) is one-sided, that is, one side is curved so as to touch areas of the skin of the feet with problems and cut them off with the blade. The second side does not perform any functions.

Advantages and disadvantages

The choice of specific items for work is a personal matter for each master, but taking into account the wishes of the client. If you chose a trimmed pedicure out of ignorance, then you can’t do without a machine. Clients attending the procedure are horrified by the appearance of the machine, preferring abrasive files or milling cutters. The machine is indeed a little intimidating, especially if you have no experience of using it before.

Like any other tool, a pedicure machine has both advantages and “sins”. Among the strengths of the device are:

• simultaneous cutting of a large part of the roughness;
• in a couple of procedures, you can achieve an ideal result;
• low cost of such pedicure procedures.

The biggest disadvantage of using a pedicure machine is the possibility of cuts. Through them you can easily introduce an infection or fungus. This trouble usually occurs with newcomers to the business. Professional specialists perform this foot treatment carefully and painlessly. The procedure also requires timely repetition to avoid new, rougher areas of the skin.

How to use at home: step-by-step instructions

Professional tools can be found not only in beauty salons. You can purchase them at any cosmetic store and remove rough skin yourself. After all, the pedicure machine can also be used for home use. This will not only save time on going to the salon, but will also save your budget.

In order to use the machine safely, without the risk of cuts, it is necessary to follow certain rules for performing a trim pedicure. You cannot use a regular razor during the procedure. Classic pedicure involves careful preparation of the feet:

1. Wash off all dirt from your feet with soap and water. This is necessary so that during the following manipulations the dirt does not spread over the entire area of ​​the foot.
2. Steam your feet up to your ankles in warm water (recommended temperature is 40-45 degrees). It is advisable to add some kind of antiseptic (for example, hydrogen peroxide) to the water.

The procedure takes up to 30 minutes, it all depends on the layer of keratinized skin. As the water gradually cools, it must be replenished with hot water. To do this, it is better to immediately place a bowl of hot water next to you so as not to be distracted from steaming your feet.

An alternative to steaming is wrapping. To do this, use gauze napkins and laundry soap. Feet are washed under running water and lightly dried with a towel. Next, hands are intensively soaped, the resulting slurry is applied to rough skin, gauze napkins are soaked in it and also placed on these areas. It is necessary to wrap a stretch film over such compresses, fixing the gauze napkins well. You need to wait about half an hour, after which you can trim the roughness.

If necessary, use special baths with tincture of marigolds (calendula), chamomile, a decoction of string, salt, and soda. Next, you should find out the problem areas on your feet. Most often these are the edges of the heels, the side of the sole near the little toe, under the phalanx of the big toe, between the big and second toes, on the sole in the toe area, etc. Having determined the necessary areas for processing, the tool itself is used:

1. Turn the machine with the protruding blade facing the skin.
2. Remove the top layer of rough skin from the feet using a machine. For safe removal, this should be done slowly, in the direction from the edge to the central part of the heel (but not vice versa). It is also not recommended to move the blade of the machine along the edge of the heel. Only rough areas should be treated, without touching healthy skin. If, after using the machine, even stripes remain on the skin, then the procedure is proceeding correctly. The machine can be used several times over the same area.
3. To complete the pedicure, treat the cuticle with a pedicure tool and remove it with special nippers. Cuticle removal can also be done with another convenient tool (nail scissors, nail clippers, styler). It is forbidden to remove cuticles with a machine. Such manipulations will result in injuries to the skin and nails.
4. Complete sanding of the skin is carried out with a regular sanding file or an electric pedicure machine.
5. After completing the pedicure, the feet are nourished with cream.

It is advisable to wear warm socks after the procedure, and a day later do paraffin therapy. Such sessions will need to be carried out at least once every two weeks, since the skin will quickly regenerate and provoke the appearance of new rough layers.

It is not recommended to use a pedicure machine for severe corns with cracks. In this case, it is better to remove some of the roughness with an abrasive, and then carefully use the machine. If blood appears, the procedure must be stopped and the damaged area treated with an antiseptic.

If there were intense, rough layers of skin on the feet, then one procedure may not be enough to achieve an ideal result. You should repeat the pedicure after 10 days. Between sessions, you can maintain the condition of the skin of your feet with a simple pumice stone or an abrasive file.

The machine is suitable for use on dry calluses. But when using a tool to remove dry skin, there is a high probability that the blade will penetrate deeply, making it easy to get a cut. Therefore, beginners in the pedicure business should not do this.

A razor used to remove hair from the body should not be used to remove rough skin. The shaving machine is not designed for this and can cut the skin.

In order for your favorite machine to last as long as possible, it needs care. It consists of timely cleaning and disinfection. To clean it well, just disassemble it and rinse it in a soapy solution. After drying, collect it. The product can be disinfected with an alcohol wipe or by boiling (an alternative is an ultraviolet sterilizer).

When you decide to purchase a pedicure machine, you can make a lot of mistakes when choosing. The main mistake is the choice of low-quality base material for attaching the blade. Stainless steel is the best option for choosing a machine head. Having chosen a material that is susceptible to rust, over time it will become covered with traces of it and this will become an obstacle to tightly fixing the blade. This will negatively affect the functionality of the machine.

Replacement blades should also be selected from stainless steel. They will not succumb to corrosion and will last a long time.

Staleks

Professional tools of this brand have a comfortable handle, and stainless steel is used to produce the product. The shape of the tool is “hatchet”. The machine from Stalex is suitable for removing rough layers of skin “dry” and for steamed feet.

Titania

This amazing machine from a European manufacturer has a fairly low cost and does not require blade replacement. The Titania machine consists of a stainless head and a comfortable plastic handle. Removes rough layers of skin layer by layer in even strips. It is more effective when used on steamed skin.

Better

The European brand offers a Beauty Care machine, which comes with replacement blades. The machine has a stainless steel head, but the ergonomic handle is made of plastic. The tool is intended for removing roughness from dry and steamed skin. The blades in this machine need to be changed depending on the dullness.