Which sterilizer is best for manicure instruments: TOP-13 sterilizers


If you are a beginner nail technician, then you have already asked yourself the question: which sterilizer is best for manicure tools. Sterilization is the key to the safety of the client’s health, an indicator of high service and care for those who come to you for beautiful nails. Just the ability to create a neat and fashionable coating of nail plates is not an indicator of a good master. And it is the sterilizer that will allow you to achieve the proper level of safety for the instrument used during nail manipulation. Which one is better to buy, let’s look into this material, because there are several varieties of these devices, and there are a lot of models on the market.

The best sterilizers for manicure instruments: TOP-13

PhotoNameRatingPrice
Ultraviolet sterilizer
#1

Sunuv S2⭐ 4.9 / 5
4 - votes
Find out the price
#2

Germix TNL⭐ 4.85 / 5
1 - voice
Find out the price
#3

JessNail Sterilizer JN-9007⭐ 4.8 / 5
4 - votes
Find out the price
Ultrasonic sterilizer or washer-sterilizer
#1

Washer-sterilizer VGT-2000⭐ 4.95 / 5
2 - votes
Find out the price
#2

ruNail, ultrasonic device for instruments⭐ 4.85 / 5
2 - votes
Find out the price
#3

Sanitas SUR 42⭐ 4.8 / 5
1 - voice
Find out the price
Glasperlene and quartz sterilizers
#1

IRISK 898⭐ 4.95 / 5
5 — votes
Find out the price
#2

Planet Nails MACROSTOP 139-10305⭐ 4.95 / 5
3 - votes
Find out the price
#3

Tools Sterilizer⭐ 4.9 / 5
1 - voice
Find out the price
#4

Glasperlene sterilizer TNL⭐ 4.85 / 5
2 - votes
Find out the price
Dry heat sterilizers
#1

Sanitizing Box WX-12C⭐ 4.95 / 5
17 — votes
Find out the price
#2

Lily KH-360B⭐ 4.9 / 5
9 — votes
Find out the price
#3

Sanitizing Box CH-360T⭐ 4.85 / 5
16 — votes
Find out the price

Which sterilizer did you choose or recommend?

Take the survey

This rating presents 13 popular models of sterilizers of various types, which have been preferred by manicurists for several years. Each of them is good in its own way. For convenience, the rating is divided into several categories depending on the type of devices described.

Please note that the editors of our site do not cooperate with commercial companies that sell equipment. And the rating is based on an analysis of reviews and user ratings that they post on popular review sites. This rating does not encourage you to buy the recommended models, it only gives an idea of ​​which of them are currently popular and in demand, and you should not take it as a direct guide to buying any option.

Ultraviolet sterilizer

No. 3 – JessNail Sterilizer JN-9007

JessNail Sterilizer JN-9007
This sterilizer is one of the most practical and user-friendly models among UV sterilizers. It is used for the last stage of tool processing. That is, before placing them in this box, you need to hold them in special solutions or process them in dry heat.

Ultraviolet rays have a bactericidal effect and protect instruments from microorganisms. Thus, by storing instruments inside, you don’t have to worry about their sterility. The device power is 8 W, works from the network. Compact dimensions - 44*34*19 cm. The disinfection process lasts approximately 40 minutes.

The device is unpretentious in operation, convenient to use, but collects quite a few reviews on the Internet. However, there are very few openly negative ones.

pros

  • small sizes
  • sufficient power
  • comfortable in using
  • Suitable for various instruments
  • reliable

Minuses

  • not found

Prices for JessNail Sterilizer JN-9007

JessNail Sterilizer JN-9007

No. 2 – Germix TNL

Germix TNL
This sterilizer is chosen by many manicurists for its unpretentiousness and low cost. Recommended for purchase in pedicure and manicure salons, as well as for hairdressers and hairdressers working at home. It is used to store already processed tools.

A 9 W lamp with bactericidal properties is installed inside the device. It is due to this that the disinfection of instruments occurs: that is, previously processed items will not be contaminated during storage until a new client arrives. Thus, at any time, the tools are ready to work with a person.

You can store instruments inside the sterilizer for up to a week. The equipment has appropriate safety certificates. The lamp does not emit ozone, and it also has an auto-shut-off function as soon as the chamber is opened - this helps protect the technician’s eyes.

pros

  • small sizes
  • low cost
  • convenient use
  • does not emit ozone
  • Automatic lamp shutdown when opening the lid
  • beautiful view

Minuses

  • used for storing cleaned instruments rather than for processing them

Reviews of the Germix TNL sterilizer

No. 1 - Sunuv S2

Sunuv S2
This rectangular sterilizer is an indispensable assistant for nail technicians and hairdressers. Small, reliable and efficient, it deserves to be in every professional's possession. In just 3 minutes, this small box destroys almost 100% of microorganisms, over the entire surface of the instruments placed in it.

The device is used for disinfecting and processing various metal tools, and is also used for storing them. The box is absolutely sterile and allows you to protect any materials and objects contained in it from microorganisms.

Inside the sterilizer there are 8 powerful diodes of 8 W each. There is also a mirror bottom, a built-in battery, and a light filter to protect the master from UV rays. The silicone stand prevents the device from sliding.

As buyers note, the device is convenient to use and easy to transport if necessary. Cleaning up dirt is also not difficult. Weight - only 410 g.

pros

  • convenient to transport
  • it's inexpensive
  • energy saving function
  • 8 diodes 8 W each
  • built-in battery
  • silicone stand

Minuses

  • not detected

Prices for the Sunuv S2 sterilizer

Sterilizer Sunuv S2

Ultrasonic sterilizer or washer-sterilizer

No. 3 – Instrument sterilizer Sanitas SUR 42

Sanitas SUR 42
This sterilizer is used not only for cleaning all kinds of instruments used in the beauty industry, but also for jewelry and dentures. In a word, it is suitable for everything that requires careful and attentive care, as well as compliance with all rules of sterility and safety.

The device has a small display and a timer showing operating time. Backlight - LCD. The reservoir has a volume of 550 ml. The power of the device is 50 W. The dimensions are quite compact and are 21*13*20 cm.

As buyers note, the device makes virtually no noise and looks beautiful. But, unfortunately, it is not always durable. However, its price is reasonable, and for a novice master or for use at home, this sterilizer is an excellent option.

pros

  • low cost
  • small sizes
  • powerful
  • beautiful appearance
  • silent operation

Minuses

  • not durable

Prices for Sanitas SUR 42 sterilizer

Sterilizer Sanitas SUR 42

Reviews of the Sanitas SUR 42 sterilizer

No. 2 – ruNail, ultrasonic device for instruments

ruNail, ultrasonic device for instruments
A sterilizer that is suitable for manicurists, hairdressers, and for home use. The bowl is larger than the previous version, which means the device is capable of processing a larger number of items at once.

This device is used to treat instruments using ultrasonic waves, which have a high enough frequency to combat contaminants. For ease of use there is a timer and a small digital display. Power consumption - 35 W. The frequency of the ultrasound wave is 40 thousand Hz. The volume of the bowl is 750 ml. The dimensions are small - 20*17*15 cm. Moreover, the tool processing time is only 15 minutes. The weight is a little more than a kilogram, but the device is still easy to transport if necessary.

pros

  • compact dimensions
  • convenient use
  • big bowl
  • high frequency ultrasound wave
  • quick cleaning

Minuses

  • not detected

Prices for ruNail sterilizer

ruNail, ultrasonic device for instruments

No. 1 – Washer-sterilizer VGT-2000

Washer-sterilizer VGT-2000
This device copes well with dirt even in the most inaccessible places. He will complete the task assigned to him without any problems.

The device is used by nail technicians and hairdressers who work with metal tools. But it can also be used for processing jewelry, dentures, optical devices, and silverware. The sterilizer has a power of 35 W, a timer that shows how much time is left until the end of the procedure. The container is made of steel and is not afraid of corrosion. The ultrasonic frequency is 40 thousand Hz, and it is enough to cope with various contaminants. The container operates for 180 seconds and then turns off itself, but the operating time can be increased manually. Bowl volume - 600 ml.

pros

  • Suitable for cleaning various items
  • not afraid of corrosion
  • high quality cleaning
  • timer
  • sufficient volumes

Minuses

  • not detected

Prices for washer-sterilizer VGT-2000

Washer-sterilizer VGT-2000

Glasperlene and quartz sterilizers

No. 4 – Glasperlene sterilizer TNL

Glasperlene sterilizer TNL
A device powered by quartz beads, suitable for processing various instruments made of metal. A compact tabletop option that is perfect for a manicurist.

This device works like this: tools for processing are placed in a flask. Inside the container there are already special glass balls heated to 165-200 degrees. Due to the high temperature, various parasites and microorganisms die, and in just 10-20 seconds of operation of the device. The model comes with the required number of balls, which need to be changed regularly (about once a year). The device power is 55 W, frequency is about 60 Hz.

Users appreciate this sterilizer for its compact size and ease of use. This is an ideal option for home use.

pros

  • suitable for home use
  • high processing temperature
  • small sizes
  • fast tool processing speed
  • convenient option

Minuses

  • not detected

Prices for glasperlene sterilizer TNL

Glasperlene sterilizer TNL

No. 3 - Tools Sterilizer

Tools Sterilizer
This is a professional sterilizer, which is often purchased by experienced manicurists. It is considered highly effective and perfectly prepares tools for further use.

Inside the plastic case is a glass made of heat-resistant material, filled with special balls. A spiral heater allows you to heat them to a certain temperature - up to 250 degrees. It is due to the high heat that the instrument is sterilized. Just a few seconds are enough to achieve the desired level of processing and safety of items.

As users write, the device is small in size and easy to use. The processing period does not exceed one minute. The balls retain heat for a long time, and you can quickly prepare the device for the next use after a short time. By the way, complete heating of the device lasts only 12 minutes.

pros

  • professional option
  • quick heating
  • high heating temperature
  • reliability
  • the balls keep warm for a long time

Minuses

  • not detected

Prices for Tools Sterilizer

Tools Sterilizer

No. 2 – Planet Nails MACROSTOP 139-10305

Planet Nails MACROSTOP 139-10305
This device has a wide range of applications and is suitable for both manicurists and hairdressers for processing metal tools. A reliable and durable option that does its job perfectly.

Warming up the device's 120 ml bowl to 250 degrees. Balls for filling the model are included. Due to its small dimensions, it can be installed directly on the desktop, making it easier to use and faster. It is enough to lower the items into the sterilizer for just 15-20 seconds, and they are ready for further work. Device power - 75 W. The main disadvantage is that it is made in China, which scares off potential buyers. But in reality, the model is quite tenacious and performs its functions well.

pros

  • small sizes
  • heating up to 250 degrees
  • good quality
  • fast tool processing

Minuses

  • not detected

Prices for sterilizer Planet Nails MACROSTOP 139-10305

Planet Nails MACROSTOP 139-10305

Reviews of the sterilizer Planet Nails MACROSTOP 139-10305

No. 1 - IRISK 898

IRISK 898
This is a quartz-type device that will help you quickly process scissors, files, and various tools used by manicurists in their work. An ideal option for craftsmen working at home.

Processing, unlike glasperlene, occurs by illuminating the objects to be sterilized with a quartz lamp. The device is mobile and compact, takes up very little work space, and is suitable for use at home.

The only disadvantages include the small capacity of the model. Otherwise, it’s an excellent option, with child protection, an auto-shutoff timer, and a reasonable price.

pros

  • small sizes
  • inexpensive
  • child protection
  • suitable for home use
  • auto shutdown
  • no need to pour balls

Minuses

  • small volumes

Prices for the IRISK 898 sterilizer

IRISK 898

Peculiarities

Advantages:

  • Short full cycle. The maximum operating time of the autoclave does not exceed 40 minutes. During this time, all bacteria, viruses and pathogenic microorganisms are destroyed. In terms of its effectiveness, an autoclave is identical to a dry heater, but sterilizes 2 times faster;
  • Low power consumption;
  • Large capacity of the internal chamber - from 2 to 50 liters;
  • Doesn't dull the tool.

Flaws:

  • High price. Unlike other types of sterilizers, an autoclave is much more expensive. For a high-quality device you will have to pay from 80 thousand rubles.

  • Only distilled water is used for work. This is due to the fact that ordinary water contains many harmful impurities that can damage the sterilizer;
  • High humidity, especially in devices without vacuum drying, causes corrosion on instruments.

The autoclave is the most reliable device for sterilization and allows you to kill almost all harmful microorganisms on the surface of the instrument.

Sukhozhar - types, choice, use of a sterilizer

Dry heat sterilizers

No. 3 – Sanitizing Box CH-360T

Sanitizing Box CH-360T
Sterilizer designed to process three sets of manicure tools at once. A convenient, efficient device with all the necessary functions.

The operating time of the device is up to 60 minutes, the duration of treatment depends on the type, level of contamination and size of the instruments being immersed. The heating temperature can be adjusted within 0-220 degrees. A sound signal will indicate that the device has completed processing. The model also has a timer and a light indicating the operating mode.

The inside of the dryer is made of steel and has a removable container in which tools are stored and processed. Chamber volume - 1.8 liters. Device dimensions 31*14*18 cm.

pros

  • small sizes
  • thermostat
  • timer
  • high efficiency
  • sufficient chamber volume
  • low cost

Minuses

  • not detected

Prices for the Sanitizing Box CH-360T sterilizer

Sanitizing Box CH-360T

No. 2 - Lily KH-360B

Lily KH-360B
This tendon is a frequent “worker” in clinics and beauty salons. It does an excellent job of disinfecting tools without reducing their service life.

Inside the container is a stainless steel container, which is where sterilization takes place. The device can simultaneously accommodate several sets of tools. There is a removable container in which processed items are stored. The model is equipped with a display, which makes it very convenient to control the heating level and sterilization period. It is easy to set the desired heating level within 0-250 degrees. The timer can be set for up to 90 minutes.

Users note that this dryer looks beautiful and neat, has good build quality and lasts a long time. One drawback is that the device does not indicate that it has completed the sterilization cycle.

pros

  • reliable
  • high quality
  • suitable for home and salon
  • heating range up to 250 degrees
  • there is a display

Minuses

  • no end signal

Prices for the Lily KH-360B sterilizer

Lily KH-360B

No. 1 – Sanitizing Box WX-12C

Sanitizing Box WX-12C
An infrared-type dry-heat sterilizer that does its job perfectly.

The device is a small cabinet containing the latest IR heaters. The power of each of them is 300 W. You can heat the dry heat to a temperature of 250 degrees (there is a regulator that allows you to adjust the temperature) in literally a matter of minutes - 2-4 minutes. The device has a completely metal body and heat-resistant glass. The set includes two tool trays, which is very convenient. Heating of the container is fast and efficient. There is no negative effect on the tools; their service life is not reduced. Processing time for products without packaging is 30 minutes, even with heating and cooling. The volume of the chamber inside is large and equal to 10 liters.

Users note that the device is easy to use, convenient and effective. But the craft bags in which the tools are packaged can burn at high temperatures.

pros

  • large volumes
  • heating range up to 250 degrees
  • two trays included
  • IR heating
  • convenient control
  • fast tool processing

Minuses

  • Kraft bags burn

Prices for the Sanitizing Box WX-12C sterilizer

Sanitizing Box WX-12C

Reviews of the Sanitizing Box WX-12C sterilizer

Kinds

Autoclaves differ from each other in technical characteristics, capacity and design.

There are 2 types of autoclaves based on loading type:

  1. Horizontal – equipped with a door and shelves inside the chamber. The number of shelves depends on the volume - from 1 to 7.

  2. Vertical – a round-shaped device with a box inside. Sometimes it is also equipped with a cassette holder - a lid with holes for sterilization cassettes made of plastic. The cassette itself is a plastic box with large holes where the tool is placed for further processing.

Why do you need a sterilizer for manicure instruments?

Equipment for disinfecting manicure instruments is an important element of the furnishings of any salon, as well as a home studio. No master can do without a device that ensures the sterile cleanliness of objects used when working with a client. We are not talking about the processing of disposable materials - only metal or plastic instruments such as tweezers, scissors, cuticle trimming tools, and so on are subject to sterilization. A clean instrument is the guarantee that no diseases will be transmitted from one client to another, and that no foreign infection will be introduced from the outside.


Manicure instruments must be sterilized

Attention! Having a sterilizer is not only about taking care of the client, first and foremost. This is also an additional plus to the reputation of the master, which allows him to gain the trust of potential visitors.

The task of any sterilizer is to clean and disinfect instruments used when working with clients. The equipment allows you to get rid of bacteria and viruses that accidentally fall on metal surfaces.

Sterilization takes place in several stages.

  1. Removal of surface base dirt, epithelium, blood or grease particles by cleaning instruments with wipes.
  2. Treating instruments with liquid antiseptics and alcohol-based compounds.
  3. Treatment in a sterilizer under high temperatures or various rays and waves.

On a note! The first two stages can be combined and performed simultaneously. This depends on the type of solution used.

By the way, sterilization can be electrical or chemical. Accordingly, sterilizers can also be electrical or chemical based on their operating principle.

Table. Types of sterilizers.

TypeDescription
ElectricIn this case, various types of radiation and waves are used to disinfect objects. For example, this could be IR, UV, ultrasound and other options for physical influence. Often such sterilizers are installed in salons, clinics, and also by high-level craftsmen.
ChemicalIn this case, the cleaning of instruments occurs through the use of various chemicals - special solutions, compositions, and so on. Most often, this type of sterilization is used at home.

In order to clean the instrument as much as possible and make it safe for other clients, it is recommended to use several processing options at once. Only in this case can we talk about absolute sterilization and cleanliness of objects used in work.

How does a manicure sterilizer work: types of tools

Sterilizers, in addition to the options mentioned above, can be different. Moreover, how the instrument is cleaned depends on what type of device it is and how it works. In any case, the entire surface of any object placed in the device is processed. It is worth getting acquainted with all the options for sterilizers that are now sold in stores.


Ultrasonic bath-sterilizer for manicure instruments VGT-2000

Ultraviolet sterilizer

An ultraviolet sterilizer, as the name implies, affects objects placed in it with UV rays. Everyone knows about their antiseptic properties. UV rays can quickly and effectively kill most pathogenic microorganisms. But they must reach the entire surface of the instruments for the treatment to be as effective as possible. And it is recommended to turn them over during the procedure using sterile tweezers, which causes some inconvenience.


Germix SD-9001 A - ultraviolet sterilizer

The main disadvantage of a UV device is the processing time. To achieve the proper level of disinfection, it will take at least 20 minutes to keep objects inside it. Moreover, in most cases, ultraviolet sterilizers are used precisely as devices for storing instruments, and not so much for processing them. As a rule, after chemical cleaning, items are placed for additional processing and storage in a UV sterilizer.

Important! UV rays cannot destroy AIDS and hepatitis viruses. So you still need additional processing of the instrument when using such a sterilizer.

Dry ovens and autoclaves

Dry heat is perhaps the most effective sterilizer option that can be used to process manicure tools. In this case, the objects placed in the device are exposed to high temperature, that is, a thermal effect occurs. The maximum temperature inside the tendon varies from 200 to 250 degrees. This level is enough to destroy all parasites and viruses.

But not every tool can withstand such high-temperature treatment. Only all-metal objects will not deteriorate during such sterilization.


Dry-heat cabinet for sterilization of manicure instruments (Sukhozhar) CH 360 T

During processing, all tools should be placed on special grids or in special so-called craft bags. The latter have protection from heat, but can still burn at very high temperatures. Processing inside the tendon lasts about half an hour, but in some cases the tool will have to be kept inside longer.

On a note! Some dry heaters have a cooling function. Instruments from such devices can be removed immediately after the sterilization cycle and used immediately without waiting for them to cool.

An autoclave is a device similar to a dry heater, but has large dimensions and exposes the instrument to hot steam. So only metal variants can be processed in it, as in dry heat. At home, an autoclave is rarely used due to its large size.

Quartz and glasperlene sterilizers

A ball or glasperlene sterilizer is a device filled with balls made of quartz. It may also be called quartz, but other types of devices can also be quartz.

This is a convenient device in the shape of a flask, which makes it possible to thoroughly warm up the tool being processed. The balls inside the sterilizer can heat up to a temperature of about 250 degrees without harm to themselves. The outside of the case is plastic, and inside, as a rule, there is a metal flask that can withstand high temperatures. This option does not take up much space and is quite economical, since it does not consume a lot of energy. It is convenient to use at home, but such sterilizers are also sometimes used in salons - albeit in small ones.


Glasperlene sterilizer for manicure instruments

This sterilizer cleans the surface of instruments quite well. And very quickly. It’s enough to just lower the devices inside the device for half a minute, and you’re done. Also, this version of the sterilizer is relatively inexpensive and is accessible to a novice master.

The downside is that only the working part of the tool is processed. That is, the handles and the top of any device still remain untreated. Another disadvantage is the dulling of the sharp parts of the instruments. The balls inside the sterilizer need to be replaced with new ones approximately once a year, as they lose their antiseptic abilities. Also, before using this sterilizer, you need to warm it up, which takes about 30 minutes on average, but depends on the chosen model.

On a note! The SES recognized glasperlene sterilizers as capable of effectively and quickly eliminating all microorganisms from the surface of instruments.

Ultrasonic models

Such sterilizers, as the name implies, operate on the basis of ultrasonic waves. They are also called sinks, because special liquid compounds are used as filler in the sterilizer chamber to help fight germs and viruses. During operation, microbubbles are formed inside such a device, which, when bursting, remove parasites and contaminants from the surface of the objects being cleaned.


Ultrasonic washer SD-200

Small, compact and efficient, these sterilizers are in great demand. They are ideal for cleaning manicure tools both at home and in the salon. Moreover, they are suitable for disinfecting plastic products, since they do not use high-temperature technologies. The main disadvantage of such a device is the significantly high cost compared to some other options, as well as the need to purchase disinfectant compounds.

Important! Liquid solutions in such devices are powerless against a number of viruses, and this also needs to be taken into account.

#2 What is tendon

A dry heat cabinet is a small box for sterilizing instruments. Using high temperatures, the device fights hepatitis, herpes, HIV and other bacterial and viral pathogens.

For a small nail salon, you can purchase a mobile device. It is a small box with a shelf for storing tools. Another option is to buy a large stationary dryer. The choice directly depends on the size of the beauty salon.

Dry heat can be air, plasma and gas. To sterilize salon instruments, it is preferable to use the first option - air dryer.

The cost of dry heat starts from 10 thousand rubles. Large stationary devices will cost more, their cost starts from 50 thousand rubles.

Yes, this is an excellent solution for destroying 100% of harmful microorganisms.

How to choose a sterilizer for manicure instruments

We have reviewed and studied basic information about all sterilizer options. But which one should you buy for a home or salon device?

The most popular are ultrasonic and UV devices, as they allow you to process absolutely any instruments, are compact and easy to use. But in terms of efficiency, dry heat and glasperlene options are recognized as the best. They treat instruments with high temperatures and destroy not only bacteria, but also viruses.

If the flow of clients is large, then the master uses a lot of tools. This means that the volume and size of the sterilizer are also important to consider when choosing a suitable model. There are those that can only hold one set, and there are those that can accommodate several at once. Moreover, it is important to take into account that the instruments to be cleaned cannot be placed on top of each other inside the sterilizer - they must be cleaned over the entire surface, without overlapping each other, otherwise there will be no proper result.


During sterilization, instruments must be neatly laid out inside the device.

The speed of disinfection usually depends on the power of the devices. The more powerful the device, the faster it cleans the surface being treated.

In short, when choosing a sterilizer, you need to consider the following parameters:

  • desired level of cleaning of devices;
  • cleaning speed;
  • difficulty of use;
  • power;
  • duration of cleaning;
  • dimensions;
  • the material from which the tools used are made;
  • budget;
  • workmanship;
  • manufacturer;
  • customer flow.

These are the main parameters that are worth paying attention to. But design is a secondary point.

Another important parameter is the conditions in which the equipment will be used. So, for example, for a home studio you can take a modest sterilizer. And if we talk about a studio or beauty salon, then it is better to take several options of sterilizers at once and carry out the highest quality processing of instruments using several equipment options at once. In this case, it will be possible to achieve maximum sterility.

What to look for when purchasing

An autoclave is an expensive sterilizer, so when purchasing it you need to pay attention to all the details. When choosing a device, pay attention to:

  • Chamber volume . This is especially important for large salons, where sterilization of a large number of instruments is required at the same time;
  • Appearance . Relevant for craftsmen who do not have a separate processing room, where even sterilization equipment should look aesthetically pleasing;
  • Guarantee . It is important that the autoclave has a warranty of at least 12 months. This will protect you in case of factory defects, defects, or non-compliance of the device with the stated characteristics;
  • Repair and service . Make sure that the manufacturer or its representative offers warranty and post-warranty service or has up-to-date contact information for repairers. In the event of a breakdown, finding a repairman will not be easy;
  • Ease of Management . Thanks to the huge selection, craftsmen purchase autoclaves with intuitive controls, which allows them not to study the instructions every time trying to figure out the next inscription on the display. Choose an easy-to-use autoclave;
  • Accompanying documents . According to the requirements of SanPin 2.1.2.2631-10, the autoclave must have instructions in Russian and a document confirming the safety of its use. In addition, the device is accompanied by a certificate of conformity.

Rating of medical autoclaves for beauty salons

Manufacturers

And finally, we’ll tell you about several popular manufacturers, sterilizers from which are often used by craftsmen. You can confidently trust the products of these companies and not worry about your health and the health of your customers.

  • DonFeel produces practical, convenient, functional devices aimed at use in salons, not home studios. This means that we can talk about the professional purpose of sterilizers and their high capacities. The sizes of the models are also quite large, and almost each of them can accommodate a large number of tools at once. As for the price, the devices of this company are at an average level. High quality materials are used in production.
  • TNL Professional is a company from Korea that produces a lot of everything for nail technicians, including sterilizers. They are suitable for home and salon use, effective and reliable. Moreover, the price of the equipment is more than affordable - the company is suitable for a novice master with a limited budget. The company strictly monitors product quality and produces reliable and unpretentious models.
  • ruNail is one of the most famous manufacturers of equipment for manicurists. This is a Russian company that mainly produces ultrasonic sterilizers with simple and convenient controls.
  • Jessnail is a company that has been on the market for 15 years. She focuses on beauty salons, but home craftsmen also use her products. The company produces some of the most reliable options for disinfection equipment.

Tips for choosing

Several recommendations will help you make the right purchase and not regret your choice after a while:

  1. Pay attention to the power of the device. The higher the value of this parameter, the faster the device will warm up.
  2. Consider the dimensions of the structure to comfortably place it on your desktop.
  3. Ultrasonic sterilizers are considered the most effective.
  4. Ultraviolet ones are best used for storing tools.
  5. The presence of special indicators on the case will be an additional advantage in operation.

Voting: which sterilizer is better?

Which sterilizer did you choose or recommend?

Sunuv S2

5.97 % ( 4 )

Germix TNL

1.49 % ( 1 )

JessNail Sterilizer JN-9007

5.97 % ( 4 )

Washer-sterilizer VGT-2000

2.99 % ( 2 )

ruNail, ultrasonic device for instruments

2.99 % ( 2 )

Sanitas SUR 42

1.49 % ( 1 )

IRISK 898

7.46 % ( 5 )

Planet Nails MACROSTOP 139-10305

4.48 % ( 3 )

Tools Sterilizer

1.49 % ( 1 )

Glasperlene sterilizer TNL

2.99 % ( 2 )

Sanitizing Box WX-12C

25.37 % ( 17 )

Lily KH-360B

13.43 % ( 9 )

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]