Which manicure is better: sawed, edged or hardware

Hardware or edged manicure, which is better and safer - is determined by comparing the pros and cons of the two methods. It’s quite rare to see a woman with untidy nails these days. To achieve results, each of them uses the services of a specialist or performs the care independently, practically without thinking about technology.

Some people believe that the hardware and classical methods of nail care are one and the same. But these are two completely different methods, both with their advantages and disadvantages. If done incorrectly, it can negatively affect your overall health.

Comparison of hardware and edged manicure techniques

To decide on the appropriate nail treatment method, you need to know all the intricacies of both procedures. You need to pay attention to the distinctive characteristics of mechanical and classical care techniques and choose an option according to individual preferences.

What is the difference between nail treatment during a hardware manicure and a classic one?

The classic method requires the following tools:

• files for correcting and polishing the nail plate;
• scissors for shaping nails;
• spatulas for separating cuticles;
• cuticle tweezers.

You may also need cotton pads, nail polish remover, and wipes.

Important! Before the procedure, it is recommended to soften the cuticle in special baths based on essential oils so as not to injure the skin and easily remove keratinized areas.

To perform hardware, special attachments are used. They perform the following functions: shortening nails, removing cuticles and calluses, polishing the nail plate. A thin milling cutter at minimum speed will get rid of burrs.

If the cuticle is thick or care has not been carried out for a long time, then before the mechanical procedure it should be softened using special means.

The main differences between the two processing techniques are speed and convenience. The hardware method lasts about 30 minutes, and the classic one more than 1 hour. Mechanical care is much more comfortable. It requires preliminary softening of the cuticle only in advanced conditions. Trimming is always done after special hand baths.

What is the difference between a hardware manicure and an edged manicure?

There are several more important points when choosing a classic or hardware manicure:

1. Price. Hardware care is almost 3 times higher than the cost of edged care. Moreover, classical processing can be performed at home.
2. Frequency of procedures. Classic trimming is performed once a week. Hardware can be performed 1 or 2 times a month.
3. Safety. The mechanical procedure is more careful and does not damage the skin around the nail, so the risk of contracting various infections is minimal. Trimming should only be done by a trusted professional or at home.
4. Aesthetics. The hardware method adds shine and does not damage the surface of the skin. Trimming often causes the cuticle to harden.

Important! It is not recommended to use the hardware manicure technique yourself, without skills, so as not to damage the nail.

The main feature of the mechanical method is that the procedure is prohibited on wet skin. The trimming method, on the contrary, should be carried out on softened skin after special baths.

Advantages and disadvantages

Each type of care has its own advantages and disadvantages, and the main ones are shown in the table.

To do it yourself, without a doubt, it is easier to choose a regular edged manicure. When deciding to contact a specialist, it is worth considering the existing nail problems, their characteristics, characteristics of care techniques and their cost. What is best for a particular person will have to be decided individually, taking into account the information given in the article and assessing the difference in procedures.

More interesting articles:

Benefits of hardware manicure

Among the main advantages are the following:

• safety of hardware manicure from cuts and wounds;
• cost-effectiveness (2 procedures per month);
• service speed;
• correction of the nail plate;
• durability of varnish coating;
• hangnails occur less frequently;
• the dry method eliminates the formation of infections.

In addition, manufacturers have developed a device for home use. It does not have such a high speed of revolutions compared to the professional one and is suitable for beginners.

Features and differences from other types of manicure

A hardware manicure is a manicure performed using a machine with a set of cutter attachments.

The devices differ in power, number of revolutions and configuration. For professional use, devices with speeds of 30,000 or more are used. For home use, models with speeds of 25,000 or more can be considered.

From other types of manicure, namely, edged, unedged, European, hardware manicure differs in that it is performed dry, without cutting tools, and therefore in skillful hands it is the least traumatic procedure. It is ideal for those with dry skin on the hands and cuticles, as well as those with closely spaced blood vessels.

With regular implementation of the hardware procedure, the cuticle begins to grow more slowly, and the service life of the manicure increases.

Combined manicure - what is it, stages of implementation

Due to the lack of need to steam your nails in water before the procedure, they become less dry and brittle over time.

The most common mistake in performing hardware manicure is cutting. That is why several hours, or even tens of hours of practice are needed before you get a good result. Before starting work at home, it is better to practice on artificial or extended nails to understand the features of working with the device.

Which manicure is better, hardware or classic: doctors’ opinion

Among specialists there is no clear preference for one type of manicure. The only thing that doctors agree on is that any method of nail care should be carried out exclusively by a professional in compliance with all standards for disinfecting the device or instruments.

Also, according to doctors, self-treatment is allowed, but the devices for carrying out the procedure must belong to one person.

Which manicure is the safest: instrument disinfection

The procedure in which the master complies with sanitary standards will not cause harm. Tool processing occurs in 4 stages:

• disinfection;
• cleaning;
• sterilization;
• storage.

In Europe, they practice a non-edging type of care. The risk of infection is completely eliminated. The chances of getting a disease as a “reward” from the mechanical method of treating nails are minimal. Therefore, classic European or hardware manicures are considered the safest.

Which type of manicure is best for healthy nails?

During a trimmed manicure, there is always a chance of damaging the nail plate or getting injured. Especially if the procedure is performed by an incompetent master or independently. Mechanical should also be carried out by a professional so as not to spoil the surface of the nails.

The most gentle type of processing is the classic European method. Due to its gentle effect on the nail plate and the absence of the need to trim the cuticle.

Is it possible to get hepatitis from a hardware manicure?

Infection with hepatitis after visiting a nail salon is highly likely if the master does not comply with sanitary standards for handling instruments. This is especially true for trimmed manicure. But even with the hardware method, the possibility of catching a virus exists.

Infection of a healthy person can occur after using an untreated instrument containing the blood of someone infected with the virus. Therefore, it is important to visit nail salons that carry out regular disinfection.

TOP 5 devices for home use

The characteristics of home and salon devices are slightly different, and I will help you roughly evaluate some “home” models.

It is important to choose the device for yourself in such a way that you do not overpay for unnecessary, unused power and get all the necessary and desired functions.

MARATHON 3 CHAMPION H35LSP

Suitable for manicure and pedicure, power – 35,000 rpm. Quite compact, has several color options. Conveniently, the power is regulated by a large and convenient switch. For a home manicure, it has a lot of power, but manicure at home on an industrial scale is just right.

Strong 210/120

Also powerful - 30,000 rpm, suitable for manicure and pedicure, compact but quite heavy, 1200g. The set comes with a cute bag for storing routers and other tools. The new technical solution eliminates possible additional vibration, which will make manicure safer.

Beurer MP100

This is a less powerful model, 20,000 rpm, the manufacturer’s website says that it is also suitable for pedicures, but you still need to think about it. The device has a richer set of equipment; the set also includes 10 attachments and a pencil case for them. Ideal for home manicure, the set includes sapphire and felt cutters.

GESS Nail Art (GESS-631)

It differs from other devices in that it is not stationary (working from the network), but mobile. Less powerful, 14,000 rpm. Mobile, so it can be more convenient, compact, weighs only 50 g. The set includes a case for cutters and ten diamond-coated and ceramic cutters.

Beurer MP62

Maximum power 5400 rpm, compact but mains powered. The set includes ten sapphire cutters. A nice bonus of the model is backlighting and smooth speed control.

Manicure with decor

The use of various types of decor in nail design allows you to transform and refresh any design, and also emphasizes the individuality of each fashionista. Rhinestones, glitter, foil, beads or confetti are just some of the materials used by nail artists today. Decorate the boundaries between shades with one of the proposed variations, emphasize the features of a particular technique, or add brilliant accents to the drawings. As a result, the entire design will sparkle with new colors and will not look too simple. The main thing is not to forget that all the details should fit harmoniously into any of your images.

There are a lot of types and options for a universal manicure that will always and everywhere look perfect. In our review, we have collected only a few proposals that meet these requirements. Choose one of the ideas you like or, starting from the basics of this design, create your own masterpieces. Don't forget - all dreams have the ability to come true. So why not put a little effort into it?

Building up

Nail extension is the artificial lengthening of the nail plate using gel materials. Forms and tips are used as the basis for extensions. These products allow you to add strength and simulate the stress zone of the nail.

Depending on the materials used, the extension can be:

• on tips. The basis for lengthening is a plastic product that follows the shape of the nail. In this case, the extension is done with acrylic or gel. The tip polymerizes along with the material and remains until the end of wear;

• on forms. The tool for modeling and increasing the length is a plastic or paper form. Unlike tips, the form is removed immediately after polymerization, leaving an extension consisting exclusively of material - acrylic, gel, biogel or acrylic;

• fiberglass . Fiberglass does not imply the use of blanks and templates. The fiberglass is attached to a sticky base layer and secured with a finish.