Every girl wants to have neat, well-groomed nails. And besides, hands are the calling card of any person. During an important meeting, you place your hands on the table, and first of all, everyone pays attention to your hands. How arched gel nail extensions will help a girl transform her hands, read further in this article.
Arched nail modeling done by specialists is much more resistant to chips and cracks. And you can make absolutely any design on your nails after that. Your nails will look soft and cute. If you are not used to walking with long nails, the master will extend your nails as small as possible so that their length does not bother you. At the same time, changes will immediately be noticeable.
Differences from extensions
It is necessary to distinguish between arched modeling and conventional extensions. Although they may involve the same steps and use the same materials, they are different procedures.
Extended nails with arched modeling
During regular nail extensions, the master works with the natural nail structure, adjusting a certain material to it. It does not change or be adjusted . Not every nail is suitable for extensions: on a wide and trapezoidal plate it looks ugly.
Arched modeling is the process of adjusting the shape of the nail to the extension. It is cut under each nail and as a result it turns out smooth, symmetrical and beautiful. An arch is formed on the nails, the degree of curvature of which ideally correlates with its length and width.
Design for French extensions in the photo
Of course, nail extensions will take more effort and time than classic nail polish, but the final effect is worth it. You can decorate your nails in completely different ways, from the classic design to various decorative elements. Feel free to experiment by using several techniques and ways to decorate your nails at once.
French extensions are still very popular. This type of manicure has a wide variety. An extended French manicure always looks neat, well-groomed and attractive.
Advantages
This type of nail design has a number of advantages:
- the result is ideally shaped nails;
- the nail becomes strong;
- the curved arch line has a perfect C-shape;
- the free edge is very strong and difficult to break;
- during the modeling process, all defects, irregularities and damage to the plate are corrected;
- the nail becomes more resistant to external mechanical influences;
- the risk of breaking the modeled nail is minimal.
Beautiful “arched” French
The procedure is quite lengthy compared to conventional extensions and takes 2-3 hours in the salon; modeling at home can take even longer, since the master has more opportunities to take into account the individual characteristics of each client.
Extended Express French
The implementation of the popular express French involves the use of white tips. They are attached to the nail one by one, after which they are covered with a gel base, dried in a lamp and secured with a base. The next step is to carefully remove the tips and file the nails in your preferred shape. This option is considered the easiest, which is why beginners in the field of nail art like this method.
Required tools and materials
For the procedure, you must have a set of tools, which can be purchased at a specialized store. A modeling master must have in his arsenal:
- tins to create a shape - placed on the plate, adjusted to its silhouette;
- arched forms - used instead of tins. They come in metal and plastic, disposable and reusable;
- tubes for modeling the bend of the arch;
- tassels;
- files;
- brushes of different diameters;
- modeling clips;
- tweezers;
- UV lamp for drying gel.
Before the arch extension procedure, it is necessary to prepare all materials and tools
The sets of tools may differ from one craftsman to another: it depends on experience and professional skills. The more nail design options and plate silhouettes a master can offer, the wider the range of his tools.
For arched modeling, gel varnishes and acrylics are used , additionally decorating them with rhinestones, stickers and stencil designs.
French extensions with glitter
Shimmering and stylish decor has been and will continue to be popular when complementing French manicure. A manicure in light shades will fit perfectly into your everyday look and diversify it. Dark and rich tones of glitter will make the design luxurious and elegant, perfect for an evening out. Most often, glitter is used to create the smile itself, since this option looks bright and attractive.
How to choose molds and clamps
Arch Modeling Clamps
Without clamps, you won’t get a beautiful arch bend. For high-quality manicure, clips in the form of clothespins . They should be small in size, a little tight and hold the arch tightly when modeling with gel. Each master himself determines which clamps are easier for him to work with: wooden, plastic or iron.
The forms are sold in sets, and it is desirable that there is a large selection among them for all possible nail shapes. It is convenient to use reusable tin forms: they can be easily adjusted to any nail. Some customers prefer disposable materials, but this will also cost more.
Arch modeling technology
Arch modeling is carried out in four stages.
- Preparation for extensions is a set of measures aimed at cleansing and degreasing the nail plates.
- Applying the base material ( primer ) in a thin layer. After this, it is dried under a special lamp.
- Modeling the required shape using special devices. First, the most accurate shape of the nail is formed and applied to the plate.
Arch modeling processThere should be no cracks or gaps between the form and the nail; they should fit each other perfectly. After applying the required amount of gel, the nails are dried and the forms are removed.
Then they are fixed with special clamps and the desired silhouette of the plate is created. Nail modeling requires significant experience and skills; this can only be entrusted to a specialist.
- Completion of extension . At this stage, the master removes the sticky layer of gel, dries and files the uneven edges, making the shape perfect.
When applying the primer, you need to make sure that it does not touch the cuticle, otherwise the main gel may later be rejected.
Watch the video master class on arched modeling, where the whole process is shown step by step and in detail:
Technique for creating artificial nails using gel
Before you start processing the cuticle, it is necessary to disinfect the hands of the client and the master. By pushing back the cuticle, you need to remove particles of skin from the surface of the nails. Then you should clean the entire nail with a 180 grit abrasive file. After degreasing, a bond and an acid-free primer are applied to ensure that the extended nails adhere more firmly to the natural plates. Having secured the form to the client’s finger, the master applies a thin layer of base gel coating to the natural plate. Now you need to place the nail in the lamp until complete polymerization for 2 minutes. The natural nail is covered with camouflage gel. After the coating has hardened, the master lays out the free edge using a white or colored gel
If necessary, you can make the color of the tip more saturated by adding several layers of material to it. After complete hardening, the extended nails are covered with a base gel, special attention is paid to the stress area. Next, you need to sprinkle the nail with transparent gel powder and place it in the lamp.
This process must be repeated at least three times. The finished structure is sawed off, acquiring the desired shape, ground and polished. Then the surface of the nails is covered with finishing gel in two layers. After each layer, the nails should be placed in a lamp. When all the stages of extension are left behind, you should lubricate the cuticle with a special oil.
To get a clear idea of how each stage of the described technology is performed, be sure to watch the useful video lesson.
Common mistakes
Errors during operation can cause many unpleasant consequences: cracks on the plate, delamination of material, and asymmetry of shape. To protect your manicure from these troubles, you need to know about the main mistakes when doing arched modeling.
It is important to follow the technology of arched nail modeling
- Incorrect application of the gel base at the very beginning. The primer should be applied carefully, avoiding contact with the periungual ridges and cuticles.
- The discrepancy between the shape of the nail and the shape for modeling can cause an unsightly nail as a result of the procedure.
- You should accurately maintain the required drying time under the lamp , do not overexpose it or turn it off prematurely.
- Ignoring the first stage of the procedure - preparatory, when the nail plate should be treated with an antiseptic degreasing agent.
- Violation of the manicure adjustment regime causes a shift in the bend of the arch, a violation of the modeled shape and its deformation.
A qualified master takes these nuances into account in his work and tries to avoid such mistakes so that the manicure lasts as long as possible and the shape remains flawless.
Contraindications
- tendency to allergies and individual intolerance to materials;
- severe damage to the nail, as well as detachment of the plate from the nail bed;
- onychomycosis - fungal infection of the nail plates;
- recent finger surgery;
- relative contraindications – pregnancy and lactation. During this period, each girl should make her own decision regarding acrylic extensions after consultation with a doctor.
